SUNMI L2s PRO Smart Mobile Terminal
Time to PRO your frontline operations.
Key Features
Fast and seamless barcode scanning: Read scratched, stained, crinkled barcodes up to 1m away, even on high shelves in your warehouse.
Triple protection: Designed for rough environments with IP68 rating, 1.5m drop resistance, and water resistance up to 1.2m deep for 30 minutes.
Long battery life enables stable performance: Features a removable 5000mAh battery for long run time, ideal for battery-intensive usage. With 18W quick charge, it can be fully charged in 3 hours, reducing operational downtime.
Enhanced Performance: Powered by an Octa-core 2.0GHz processor with multiple memory configurations (3+32GB, 4+64GB, 6+128GB optional).
Strong Protection: IP68 rating, 1.5m drop spec, and Corning Gorilla Glass touchscreen for enhanced durability.
NFC Capability: Integrated NFC reader for contactless transactions and identification.
High Volume Audio: Equipped with a loud speaker for clear audio notifications.
Fast and Accurate Reading: Reads barcodes up to one meter, including scratched or crinkled ones, and under strong light. Supports OCR.
Long Battery Life: 5000mAh battery with 18W quick charging for extended operational periods.
Multiple Accessories
Enhance the functionality of your SUNMI L2s PRO with a range of optional accessories:
- Single Charging Base: Charge the PDA device.
- Charging Base: Simultaneously charge the PDA and battery. Can also charge an UHF trigger handle.
- 4-slot charging base: Supports charging up to 4 PDA devices simultaneously, and can accommodate a protective case, trigger handle, or hand strap.
- 4-slot battery charger: Supports charging up to 4 batteries simultaneously with intelligent battery management.
- Trigger Handle: Improves barcode scanning efficiency, especially for warehousing, manufacturing, and logistics sectors.
- UHF Trigger Handle: Read multiple RFID tags at once with a fast read rate (>200 tags/sec) and long read range (>10M). *Read rate and range depend on actual environments.
- Hand strap (included)
- Protective case
- Screen tempered glass
SUNMI L2s PRO Tech Specs
| Product Model | T8920 |
|---|---|
| OS | SUNMI OS (based on Android 12), GMS certified |
| Processor | Cortex-A53, octa-core (4*2.0GHz + 4*1.5GHz) |
| Memory | 3GB RAM+32GB ROM, 4GB RAM+64GB ROM, 6GB RAM+128GB ROM (optional) |
| Display | 5.5" HD+, 1440*720, IPS, Capacitive multi-touch |
| Camera | Front: 2MP FF; Rear: 13MP, AF, Flash, supports 1D/2D barcode scanning |
| NFC Reader | Supports TypeA&B card, Mifare card, Felica card, ISO/IEC 14443 and ISO15693 compliant |
| Scanner | 1D/2D barcode scan engine |
| Speaker | 1* 1.5W |
| Card Slot | 1* PSAM, 1* NANO SIM + 1* MINI SIM, 1* MicroSD (TF) up to 256G |
| Network | 2G&3G&4G |
| Wi-Fi | 2.4GHz/5GHz, IEEE 802.11 a/b/g/n/ac |
| Bluetooth | Bluetooth 5.0 BLE |
| GPS | AGPS, GPS, Glonass, Beidou, Galileo |
| MIC | 2* MIC |
| Buttons | 1* Power on/off, 1* Custom, 2* Volume (+/-), 2* Scan (left/right) |
| Ports | 1* Audio jack, 1* Type-C USB OTG, 2* Pogo pin (bottom for charging), 8* Pogo pin (back for accessories) |
| Sensor | Gravity Sensor, Light Sensor, Compass, Distance Sensor, Barometer Sensor (optional) |
| Battery | Removable polymer lithium battery, 3.8V/5000mAh |
| Power Adapter | Input: AC 110-240V; Output: 9V 2A / 5V 2A (*Vary from different versions) |
| Dimensions (L*W*H) | 154.4*74.6*17.1mm |
| Total Weight | 250g (*Vary from different versions) |
| Protection Level | IP68, 1.5m drop test (*Data from Third-party Lab) |
| Environment | Operating temperature: -20°C~55°C; Storage temperature: -40°C~70°C |
Notes and Disclaimers
- 1. Based on Android 12, SUNMI OS is customized for business scenarios.
- 2. Some features may be unavailable due to GMS restrictions.
- 3-5. Certified by third-party authorities.
- 6. Quick charging functions optional.
- 7. The usable memory may be less than the installed memory.
- 8. All specifications are subject to change without prior notice.
Warning: ⚠️ DO NOT STARE INTO BEAM
