Technical Datasheet
BATH FILLER
SKU: DUBF
TECHNICAL DRAWING
Diagram showing the dimensions of the bath filler. Key dimensions indicated are:
- Overall height: 139 mm
- Maximum installation depth: 30 mm
- Width: 180 mm
- Height of spout: 111 mm
- Projection of spout: 63 mm
- Thread size: 2-G¾"
Range: Ivan
Dimensions are in millimetres except thread sizes which are BSP imperial.
NOTES
- Our guarantee is subject to the product having been installed, used, and maintained in accordance with our instructions.
- All working parts (such as hinges, ceramic disks, cartridges, seals, and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from the proof of purchase date. This excludes seats, which are covered for 12 months.
- Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI.
- This does not affect your statutory rights.
- Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex Ceramic UK Ltd reserves the right to change product specifications without prior notification.
