Setup
The SmartThings Button is a smart home device that can control connected devices and monitor temperature.
- Make sure the Button is within 15 feet (4.5 meters) of your SmartThings Hub or SmartThings Wifi (or compatible device with SmartThings Hub functionality) during setup.
- Use the SmartThings mobile app to select the "Add device” card and then select the "Remote/Button" category.
- Remove the tab on the Button marked "Remove When Connecting” and follow the on screen instructions in the SmartThings app to complete setup.
Device Illustration: A top-down view of the SmartThings Button, which is a small, circular, white device with a single button on its surface.
Placement
The Button can control any connected devices at a touch of a Button.
Simply place the Button on the table, desk, or any magnetic mating surface.
The Button can also monitor temperature.
Troubleshooting
- Hold the "Connect" button with a paperclip or similar tool for 5 seconds, and release it when the LED starts blinking red.
- Use the SmartThings mobile app to select "Add device" card and then follow the on-screen instructions to complete setup.
Device Views:
- Back View: Shows the underside of the Button, with a circular area labeled "Connect button".
- Front View: Shows the top surface of the Button, with a small indicator labeled "LED Light".
If you're still having trouble connecting the Button, please visit Support.SmartThings.com for assistance.
