Your New Smart Plug Guide
Setup
Follow these steps to set up your new Smart Plug.
-
Download and Install App
Download and install the SmartThings app. The app is available on the Google Play Store and the Apple App Store.
[Available on Google Play] [Available on the App Store]
-
Set up SmartThings Hub
Ensure your SmartThings Hub is already set up. The Smart Plug requires a SmartThings Hub to function.
-
Plug In and Power On
Plug the Smart Plug into a power source and switch the power source on. Wait until the LED on the plug blinks Red and Green.
-
Pair Smart Plug with Hub
In the SmartThings app on your phone, pair the Smart Plug with the Hub. Select "Add device" > "SmartThings" > "Outlet" > "Smart Plug (7A-PL-Z-J3)".
-
Complete Setup
Follow the on-screen instructions in the SmartThings app to complete the setup process.
-
Installation Complete
When the installation is complete, the indicator light will change to solid green for a while and then turn off.
Placement
The Smart Plug can be used to monitor and control lights, electronics, and appliances from anywhere.
Ensure you use the Smart Plug in the correct socket for the plug type. Always check before using that the voltage supply is suitable for the Smart Plug, within the specified limits, and that the connected device is also within the specified voltage and current limits.
Troubleshooting
To reset: Ensure the Plug is powered, then press and hold the Power button for 5 seconds until the LED blinks Green and Red.
Follow the instructions from Step 4 to re-pair your Smart Plug.
Safety Instructions
Read, keep, and follow these instructions. Heed all warnings.
- For indoor use only. Do not use in wet locations.
- The total current limit of the device is 13A. To avoid damage, do not exceed the 13A limit.
- If a direct short is created on the output, the Smart Plug will be damaged and no longer function.
- Do not disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact the reseller or authorized service facility.
- Do not insert your Smart Plug into another Smart Plug.
- Position the Smart Plug so that it is readily accessible and may be easily removed from the power socket.
- The equipment must be connected to a MAINS socket outlet with a protective earthing connection.
Read our Product Usage Guidelines at: www.SmartThings.com/Guidelines.
Disclaimer
Some content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal non-commercial use.
You may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device.
Environmental Protection and Disposal
Electrical and electronic equipment that is no longer usable and defective or used batteries must be separated from other waste and recycled in an environmentally friendly manner (European Directive on waste electrical and electronic).
To dispose of electrical and electronic equipment or batteries, use your country-specific return and collection systems.
Within the European Union, this symbol ? indicates that the products must not be disposed of in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose of the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling.
Manufacturer and Specifications
Manufacturer: LEEDARSON LIGHTING CO., LTD.
XINGDA RD, XINGTAI INDUSTRIAL ZONE, CHANGTAI COUNTY, ZHANGZHOU, FUJIAN, 363900, CHINA
| Model number | 7A-PL-Z-J3 |
|---|---|
| Power supply | AC 240V, 50Hz, Max 13A |
| Power consumption | ≤ 0.5W |
| Power output | Max 3120W |
| Operational temperature | 0°C ~ 35°C |
| Frequency | 2.4GHz (2400-2483.5MHz) |
| RF power | Max 9.8dBm |
One (1) Year Limited Warranty
Leedarson warrants this product (the "Product") against defects in materials and/or workmanship under normal usage within ONE (1) YEAR from the date of purchase by the original purchaser ("Warranty Period"). If a defect arises and a valid claim is received within the Warranty Period, then as your sole remedy (and Leedarson's sole liability), Samsung will offer the following two options within 30 days following receipt of the returned Product:
- Repair the defect at no charge, using new or refurbished replacement parts.
- Replace the product with a new product that is functionally equivalent to the original.
A replacement product or part assumes the remaining warranty of the original Product. When a Product or part is exchanged, any replacement item becomes your property and the replaced Product or part becomes Leedarson's property.
Obtaining Service: Please either contact directly the reseller where you bought this product from or the local service agent of the reseller.
All warranty information is subject to change without notice. For the latest warranty information, please visit SmartThings.com.
Compliance
CE mark. Complies with IMDA Standards DA100790.
Support
If you're still having trouble connecting the Smart Plug, please visit Support.SmartThings.com for assistance.
