User Manual for SmartThings models including: Button, Setup Button, SmartThings
Welcome to your Button Setup 1. 2. Use the SmartThings mobile app to select the “Add device” card and then select the “Remote/Button” category.
marked “Remove When Connecting” and follow the on screen instructions in the SmartThings app to complete setup. Page 2. Connect button. Troubleshooting.Missing:
marked “Remove When Connecting” and follow the on screen instructions in the SmartThings app to complete setup. Page 2. Connect button. Troubleshooting.
File Info : application/pdf, 2 Pages, 82.90KB
DocumentDocumentWelcome to your Button Setup 1. Make sure the Button is within 15 feet (4.5 meters) of your SmartThings Hub or SmartThings Wifi (or compatible device with SmartThings Hub functionality) during setup. 2. Use the SmartThings mobile app to select the "Add device" card and then select the "Remote/Button" category. 3. Remove the tab on the Button marked "Remove When Connecting" and follow the on screen instructions in the SmartThings app to complete setup. Placement The Button can control any connected devices at a touch of a Button. Simply place the Button on the table, desk, or any magnetic mating surface. The Button can also monitor temperature. Troubleshooting 1. Hold the "Connect" button with a paperclip or similar tool for 5 seconds, and release it when the LED starts blinking red. 2. Use the SmartThings mobile app to select "Add device" card and then follow the on-screen instructions to complete setup. Connect button LED Light Back Front If you're still having trouble connecting the Button, please visit Support.SmartThings.com for assistance.