Aldes DESIGN 150 H Spot Extractor

Product Overview

The Aldes DESIGN 150 H is an ultra-flat spot extractor designed for intermittent ventilation of rooms such as bathrooms, WCs, utility rooms, and kitchens. It offers a choice of diameters and four operating modes, including presence detection.

Product Highlights

• Ultra-flat design
• Available with presence detection
• Quiet operation: from 26 dB(A)

Operating Principles

DESIGN spot extractors provide intermittent ventilation for rooms like bathrooms, WCs, utility rooms, and kitchens (depending on the chosen diameter). They offer four operating modes:

• Mode I: Triggered and stopped by a switch.
• Mode T: Triggered by a switch and stopped by an adjustable timer (2-30 minutes).
• Mode H: Triggered by a humidity threshold and stopped by an adjustable timer (2-30 minutes).
• Mode P: Triggered by presence detection and stopped by an adjustable timer (2-30 minutes).

Application Areas

• Residential buildings (collective and individual)
• Renovation projects

Installation & Features

• Fixing: Secured by 4 provided screws.
• Mounting: Suitable for wall or ceiling installation.
• Maximum discharge length: 2 meters.
• Operation: Manual and timed control via a switch.
• Air Intake: Fresh air supply through an intake grille or under-door clearance.

Key Features

• Application: Spot ventilation for rooms, forced intermittent extraction.
• Description:
  • Material: High-quality ABS casing and front grille, with an aluminum trim option for the aesthetic face.
  • Motor: Low-noise, low-consumption motor.
  • Non-return valve: Removable, located at the rear of the extractor.
  • Operation: Automatic timed operation based on pre-set humidity levels (60-90%) and adjustable run times (2-30 minutes). Automatic operation based on presence detection with adjustable run times (2-30 minutes).
• Packaging: Supplied in a communicative carton.

Technical Specifications

Main Features

• Diameters:
  • Ø 100 mm: For rooms up to 7 m² (bathroom, WC, utility room).
  • Ø 125 mm: For rooms from 7 to 12 m² (kitchen, bathroom, WC, utility room).
  • Ø 150 mm: For rooms over 12 m² (large kitchen, large bathroom/sanitary area).
• Operating Modes: (As detailed in Operating Principles: I, T, H, P)
• Motor: Very low consumption and low acoustic level motor.
• Non-return Valve: Removable at the rear.
• Thermal Protection: Integrated.
• Material: High-quality ABS body; aesthetic face in ABS with aluminum trim (for aluminum finish).
• Packaging: Supplied in a communicative carton.

Additional Features

• Manual Operation (Mode I): Instant start and stop via a switch (not supplied).
• Timed Operation (Mode T):
  • Triggered by switch action.
  • Timed stop, adjustable from 2 to 30 minutes.
• Automatic Humidity Detection (Mode H):
  • Boost mode triggered by a humidity threshold, adjustable between 60% and 90%. Operation is automatic when ambient humidity exceeds the pre-set threshold.
  • Timed stop, adjustable from 2 to 30 minutes. After the humidity level drops below the trigger threshold, the extractor runs for the pre-set duration and then switches off automatically.
• Automatic Presence Detection (Mode P):
  • Triggered by presence detection.
  • Lens detection distance: 1 to 4 meters.
  • Lens detection angle: 100°.
  • Timed stop, adjustable from 2 to 30 minutes.

Kit Components

• Fixing screws and plugs (4).

General Data

Dimensional Data

Performance Data

Aerulic Data

Electrical Data

Regulatory Data