Aldes DESIGN 125 H

Product Overview

The Aldes DESIGN 125 H is a low-profile, spot extractor designed for intermittent ventilation of rooms such as bathrooms, WCs, utility rooms, and kitchens. It is suitable for small to very large rooms and offers three different diameters for optimal application. The unit features four operating modes, including presence detection.

Key Product Features:

• Low-profile design
• Available with presence detection
• Quiet operation: starting from 26 dB(A)

Two images of the Aldes DESIGN H extractor are provided. The left image shows a front view of the unit, highlighting its square, low-profile design with a white grille. The right image appears to be a similar view, possibly showing a slightly different angle or detail.

Operating Principles

DESIGN spot extractors ensure intermittent ventilation for rooms like bathrooms, WCs, utility rooms, and large kitchens, depending on the chosen diameter. They operate with four distinct modes:

• Manual triggering and stopping via a switch (Version I).
• Manual triggering via a switch with a timed shut-off, adjustable via a timer (Version T).
• Humidity threshold triggering with a timed shut-off, adjustable via a timer (Version H).
• Presence detection triggering with a timed shut-off, adjustable via a timer (Version P).

Application and Installation

Application Areas:

• Residential collective housing
• Residential individual housing
• Renovation projects

Installation:

• Fixed by 4 supplied screws.
• Can be installed on walls or ceilings.
• Maximum discharge length: 2 meters.
• Manual and timed operation controlled by a switch.
• Fresh air intake into the room is achieved via an air inlet grille or by undercutting the door.

Reference Argument:

• Application: Spot ventilation for a room, forced and intermittent extraction.
• Description: Made with a high-quality ABS grille and casing. Features a low-acoustic-level motor, a removable non-return flap at the rear of the extractor, and integrated thermal protection.
• Functionality: Timed operation (start and stop) based on a pre-set humidity level. The timer is adjustable from 2 to 30 minutes, and the humidity threshold is adjustable between 60% and 90%.
• Packaging: Supplied in a communicating carton.

Technical Specifications

Main Characteristics:

• Diameters:
  • Ø 100 mm for rooms up to 7 m² (bathroom, WC, utility room).
  • Ø 125 mm for rooms from 7 to 12 m² (kitchen, bathroom, WC, utility room).
  • Ø 150 mm for rooms over 12 m² (large kitchen and large bathroom/WC).
• Motor: Very low consumption and low-noise motor.
• Non-return Flap: Removable non-return flap at the rear of the extractor.
• Thermal Protection: Integrated thermal protection.
• Material: High-quality ABS casing, aesthetic face with aluminum trim (for aluminum finish).

Complementary Characteristics:

• Manual Operation (Version I): Instantaneous start and stop via a switch (not supplied).
• Timed Operation (Version T): Triggered by a switch action, with a timed shut-off adjustable from 2 to 30 minutes.
• Automatic Humidity Operation (Version H): Boost mode triggered by a humidity threshold adjustable between 60% and 90%. The unit automatically starts when ambient humidity exceeds the pre-set threshold. Timed shut-off is adjustable from 2 to 30 minutes. After the humidity level drops below the trigger threshold, the extractor continues to run for the pre-set duration before automatically switching off.
• Automatic Presence Operation (Version P): Triggered by presence detection. Detection lens distance: 1 to 4 meters. Detection lens angle: 100°. Timed shut-off is adjustable from 2 to 30 minutes.

Kit Composition:

• 4 fixing screws and wall plugs.

General and Dimensional Data:

A diagram illustrates the physical dimensions of the Aldes DESIGN 125 H extractor. It includes front and side views with labels for key measurements: A (front grille diameter, 176 mm), E (front grille depth, 17 mm), Ø rejet (duct connection diameter, 125 mm), D (body depth, 87 mm), P (mounting depth, 117.5 mm), C (wall projection, 13.5 mm), H (height, 176 mm), and L (width, 176 mm).

Performance Data:

• Max Flow Rate: 115 m³/h
• Sound Pressure Level at 3m: 31 dB(A)
• Electrical Data: Voltage: 230 V, Frequency: 50 Hz, Max Power: 9.3 W, Protection Rating: IP2
• Regulatory Data: Electrical Insulation Class: Class 2

An aerodynamic performance curve for the Aldes DESIGN 125 extractor is provided. The Y-axis represents static pressure in Pascals (Pa), ranging from 0 to 24. The X-axis represents airflow rate in cubic meters per hour (m³/h), ranging from 0 to 120. The curve shows a typical fan characteristic, where pressure decreases as airflow increases.