Foxwell Quick Start Guide for Diagnostic Tablet

Shenzhen Foxwell Technology Co., Ltd.

Vehicle Connection

Tablet with cable

Locate the data link connector (DLC) under the dash on the driver side of the vehicle.
Connect the diagnostic cable to the scanner and plug it to the vehicle DLC with a correct adapter.
Switch the ignition key to the ON position.
Boot up the scanner and launch the diagnostic APP.
Check if the connection indicator turns to green. If yes, it means the scanner is ready to start diagnosis.

Tablet with VCI dongle: Bluetooth Connection

Locate the data link connector (DLC) under the dash on the driver side of the vehicle.
Connect the diagnostic cable to the VCI dongle and plug it to the vehicle DLC with a correct adapter.
Switch the ignition key to the ON position.
Boot up the scanner, launch the diagnostic APP and make Bluetooth pairing of the VCI dongle and tablet.
Check if the connection indicator turns to green. If yes, it means the scanner is ready to start diagnosis.

Tablet with VCI dongle: USB Connection

Locate the data link connector (DLC) under the dash on the driver side of the vehicle.
Connect the diagnostic cable to the VCI dongle and plug it to the vehicle DLC with a correct adapter.
Switch the ignition key to the ON position.
Connect the VCI dongle to the tablet with the USB Type-B cable.
Boot up the tablet and launch the diagnostic APP.
Check if the connection indicator turns to green.

Registration

NOTE: Please make sure your network works correctly and the tablet is fully charged or connect to external power supply.

Press Update from home screen of diagnostic APP, and then press Free Registration to start.
Enter one of your emails and tap Send Code to get a 4-digit security code. Input the code, create a password and click Free Registration to complete.
The serial number will be recognized automatically and click Submit to activate the scanner.

Update

Press Update from home screen of diagnostic APP or press update shortcut at the tool bar.
The available updates display. Click the check box(s) in front of the software you wish to update and then click the Update button to download.

Diagnostic Operations

Before start diagnosis, please make sure:

The ignition switch is turned to ON position.
The engine is off.
The vehicle battery voltage is between 10-14 volts.
The scanner is correctly connected to the vehicle.

Don't connect or disconnect the equipments while the ignition is on or the engine is running.

Establish communication with the vehicle either via Bluetooth/USB or cable connection.
Identify the vehicle either by VIN reading or manually entry.
Find the control modules installed in the vehicle either by Quick Scan or manual selection.
Start the tests and make records of test data when necessary.

Powering up the Scanner

Before using the diagnostic APP of the scanner (including updating the scanner), please make sure to provide power to the scanner. In case of low battery volume, please charge it with the power cable.

The unit operates on any of the following sources:

Internal Battery Pack
Vehicle Power
External Power Supply

Data Logging

Data Logging collects the communication data between the scanner and the vehicle under test to help with troubleshooting of diagnostic failures.

When connected to a car, click the Data Logging icon to start to create a debug data log.
Click the icon again to stop the recording and the data log record will be saved automatically.
Go to Data Manager > Data Record to view the stored debug logs.

Remote Control

Whenever you need to get remote support from Foxwell:

Click the Remote Control icon at the home screen to start TeamViewer.
Press QuickSupport icon and the TeamViewer ID will show.
Send your ID to us to let our team to take control your tablet.

Contact Us

For service and support, please contact us.

WebSite: www.foxwelltech.us
E-mail: support@foxwelltech.com
Service Number: +86-755-26697229
Fax: +86-755-26897226

	Foxwell HD500 Diagnostic Tablet Quick Start Guide A quick start guide for the Foxwell HD500 diagnostic tablet, covering vehicle connection, registration, software updates, diagnostic operations, powering up the scanner, data logging, remote support, and contact information.
	Foxwell Diagnostic Tablet Quick Start Guide - Vehicle Connection, Registration, and Updates A quick start guide for Foxwell diagnostic tablets, covering vehicle connection methods (cable, Bluetooth, USB), user registration, software updates, diagnostic operations, and support contact information.
	Foxwell NT510 Elite Quick Start Guide for Handheld Scanners A quick start guide for Foxwell handheld scanners, covering vehicle connection, diagnostic operations, registration, and updating via the FoxAssist client. Includes FAQs and contact information for support.
	How to Update Foxwell NT6-Series Scanners and Print Data A step-by-step guide on updating Foxwell NT6-Series automotive diagnostic scanners using the FoxAssist software, including registration, software download, installation, and data printing.
	Foxwell NT624Elite All-System Scanner Quick Start Guide A concise guide to setting up, registering, and using the Foxwell NT624Elite all-system car diagnostic scanner, including troubleshooting tips and support information.
	Foxwell 4.3" Series User's Manual This user manual provides comprehensive instructions for the Foxwell 4.3" Series diagnostic tool, covering setup, operation, maintenance, and troubleshooting. Learn how to identify vehicles, perform diagnostic operations, and utilize various maintenance functions.
	Foxwell NT301 Code Reader Quick Start Guide A quick start guide for the Foxwell NT301 Code Reader, detailing its features, applicable functions, and how to use it for diagnosing check engine issues.
	FOXWELL NT530 Plus User's Manual: Automotive Diagnostic Guide Discover the capabilities of the FOXWELL NT530 Plus diagnostic scanner with this comprehensive user manual. Learn about vehicle diagnostics, system setup, troubleshooting, and software updates from Shenzhen Foxwell Technology Co., Ltd.