Technical Datasheet
SKU: XCMBF
Product: MONO BATH FILLER
Drawing Type: TECHNICAL DRAWING
Technical Drawings
Diagrams showing the Mono Bath Filler with dimensions:
- Front view with dimensions Ø58, M33X1.5, Ø35.
- Side view with dimensions 139, Max35, 130, and angles 58°, 60°.
- Top view showing the handle and spout, with dimension 178.
Dimensions are in millimetres except thread sizes which are BSP imperial.
Specifications
| Attribute | Value |
|---|---|
| Weight | 0.0077 m³ |
| Range | Arco |
Notes
- The guarantee is subject to the product being installed, used, and maintained according to instructions.
- Working parts (hinges, ceramic disks, cartridges, seals, cistern fittings) subject to normal wear and tear are covered for 36 months from the proof of purchase date. Seats are covered for 12 months.
- The guarantee applies to the original purchaser and is non-transferable. It is only applicable in the UK and ROI.
- This does not affect statutory rights.
- Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.
