Genesis THOR 303TKL Quick Installation Guide

Product Information

This document provides a quick installation guide for the Genesis THOR 303TKL gaming keyboard.

For product and support information, visit: www.genesis-zone.com

You can download the necessary software from our website: www.genesis-zone.com/support

System Requirements

• PC or compatible device with a USB port
• Operating Systems: Windows XP/Vista/7/8/10/11, Linux, Android

Installation

1. Connect the keyboard cable to a free USB port on your computer. Wait approximately 15 seconds for the drivers to install completely.
2. Download and install the software from www.genesis-zone.com to configure advanced features.
3. Open the installation folder and run setup.exe.
4. Follow the on-screen instructions to complete the installation.
5. After successful installation, the software icon will appear in the system tray. Double-clicking it opens the settings interface.

Key Features and Functions

1. Replacing Switches

To replace a switch:

1. Disconnect the keyboard from the power source.
2. Gently pull the keycap upwards to remove it.
3. Use the provided metal clamp tool. Insert it under the switch body as shown in the diagram (text description: The clamp has arms that fit under the switch).
4. Press the clamp arms towards the switch and simultaneously pull the switch vertically upwards.
5. Insert the new switch vertically into the PCB holes and press down gently.
6. Reattach the keycap and connect the keyboard to the computer.

Note: If a switch does not work after replacement, ensure its legs are correctly inserted and not bent.

2. Arrow Function Change

Press FN + W to swap the arrow key functions with the W, A, S, D keys.

3. Backlight Brightness

To adjust backlight brightness, press FN + Up Arrow or FN + Down Arrow.

4. Backlight Effect Speed

To change the speed of backlight effects, press FN + Left Arrow or FN + Right Arrow.

5. Backlight Color Change

To change the backlight color, press FN + Del.

6. Backlight Mode Change

Press FN + Ins to cycle through 20 backlight modes.

7. Game Backlight Modes

Press FN + 1 through FN + 5 to switch between 5 dedicated game backlight modes.

8. Restore Factory Settings

To reset all settings to their factory defaults, press and hold FN + ESC for 5 seconds.

Regulatory and Safety Information

This product complies with EU requirements and is manufactured according to the European RoHS standard.

It comes with a 2-year limited manufacturer warranty.

Safety Precautions:

• Use the product only as intended. Improper use may damage the device.
• Unauthorized repairs or disassembly will void the warranty and may damage the product.
• Avoid dropping or hitting the device, as this can cause damage, scratches, or malfunctions.
• Do not use the device in extreme temperatures (low or high), strong magnetic fields, or in damp or dusty environments.

For detailed information on WEEE (Waste Electrical and Electronic Equipment) disposal and recycling, please refer to local authorities or your retailer.

Support

If you have any problems, please contact us:

www.genesis-zone.com/contact