Zeblaze Btalk Lite User Manual

Brand: Zeblaze

Product Description

Please read the manual fully before use, and keep it in a safe place for future reference.

Diagram: Watch Components (Top View)

Illustrates the front of the smartwatch. Labels point to: "Display" (the main screen area), and on the back: "Contact Points" (two small circular metal contacts) and "Heart Rate Sensor/ Blood's Oxygen Level Sensor" (a larger circular sensor area adjacent to the contact points).

Diagram: Watch Components (Side View)

Shows the side profile of the smartwatch, highlighting a single button labeled "Power Button".

Diagram: Watch Charging

Depicts the back of the smartwatch with the magnetic charging cable connected. The charger has a USB-A connector on one end and a magnetic puck on the other, which aligns with the watch's contact points.

How to Wear It?

In daily use, tie the watch comfortably to your wrist, about one finger width away from the wrist bone. Adjust the wristband to ensure that the heart rate sensor can collect data normally. Note: Wearing the watch too loosely may affect the data collection of the heart rate sensor.

Pairing

Download and install the "Zeblaze Fit" App to better manage your watch, log into your account, and enjoy more services.

Note: The App version may have been updated; please follow the prompts according to the current App version. Long press the function key to turn on the watch.

Scan the QR code displayed on the watch with your mobile phone to download and install the "Zeblaze Fit" App. You can also download the App in the App store or scan the QR code below. Open the "Zeblaze Fit" App and log into your account. Select "Add device" and follow the instructions to add your watch.

Diagram: App QR Code

A square QR code is displayed, labeled "Da Fit" and "APP QR Code". Text below instructs: "Scan the QR code to download the APP". It also mentions availability on "Play Store, Appstore: 'F Fit' APP".

Note: When pairing, please make sure that the phone's Bluetooth is turned on and the watch is well connected to the phone.

If you cannot find the watch when adding the App, or cannot connect to the phone during use, please press and hold the power button of the watch for 5 seconds to restore the factory settings, and then try again.

How to Use?

  1. Open the control panel: swipe down from the top of the home screen.
  2. View notifications: swipe up from the bottom of the main screen.
  3. Switch widgets: swipe left or right on the home screen page.
  4. Back: swipe from the left edge to the right when you are on other screen pages.
Diagram: Navigation Gestures

Illustrates swipe gestures on the watch screen. The left diagram shows numbered arrows indicating: 1. Swipe down from the top (control panel), 2. Swipe up from the bottom (notifications), 3. Swipe left/right (widgets). The right diagram shows: 4. Swipe from the left edge to the right (back function).

Charging

When the battery is low, charge the watch immediately. To do this, use the included charger.

Diagram: Charging Process

Shows the watch and the magnetic charging cable. An arrow indicates connecting the charger to the watch.

Adjust & Install/Uninstall the Strap

Adjust the position of the buckle according to the circumference of the wrist. Align the slot of the strap with the watch, and then insert the strap into the watch until you hear a click. You can pull the strap to see if it is firmly installed.

To install or remove the strap, refer to the picture below.

Diagram: Strap Installation/Removal

A sequence of images shows how to attach and detach the watch strap. It involves aligning a groove on the strap with a corresponding slot on the watch body and pushing until it clicks. A close-up highlights the release mechanism, often involving a small tab.

Safety Instructions

  1. When using the watch to measure your heart rate, keep your wrist still.
  2. The watch touch screen does not support underwater operation. When the watch comes in contact with water, please wipe off excess water on the surface with a soft cloth before use.
  3. In daily use, avoid wearing too tightly. If there are signs of redness and swelling in the skin contact area, immediately stop using the watch and seek medical help.
  4. Keep the contact area dry and clean the strap with water regularly.
  5. Please use the included charging stand to charge the watch. Only use the power adapter that meets local safety standards or is certified and provided by a qualified manufacturer. When charging the watch, always keep the power adapter and charging stand dry. Do not touch them with wet hands. Do not expose the power adapter and charging dock to rain or other liquids.
  6. The working temperature of the watch is 0°C to 45°C. If the ambient temperature is too high or too low, the watch may malfunction.
  7. The watch has a built-in battery. To avoid damage to the battery or the watch, please do not disassemble or replace the battery by yourself. Only authorized service providers can replace the battery. Otherwise, if the wrong type of battery is used, it will cause potential danger or personal injury.
  8. DO not disassemble, puncture, hit, squeeze or throw the battery into fire. If the battery has any swelling or liquid leakage, stop using it immediately.
  9. Do not throw the watch or its battery into fire to avoid explosion.
  10. This watch is not a medical device, and any data or information provided in this watch shall not be used as basis for diagnosis, treatment and prevention of diseases.
  11. The watch and its accessories may contain small parts. To avoid suffocation or other hazards or damage caused by children, please keep the watch out of the reach of children. This watch is not a toy and can only be used by children under the supervision of adults.
  12. Abuse or improper handling of the battery can cause overheating, leakage or explosion. To avoid possible injury, please do the following:
    • A. Do not squeeze or puncture the battery.
    • B. Do not short-circuit the battery or expose it to water or other liquids.
    • C. Keep the battery away from children.
    • D. Keep the battery away from fire.
    • E. Do not place the battery in an extremely high temperature environment or extremely low air pressure environment.
  13. If the battery is damaged or if you find any discharge or accumulation of foreign objects on the battery wires, stop using it. We recommend charging the battery every three months to prevent overcharging.
  14. Do not put batteries in the garbage disposed of in the landfill. When disposing of the battery, please comply with local laws or regulations.

Specifications

AttributeValue
ModelStratos 2
Water resistance5 ATM
Bluetooth versionBLE 5.0
Battery typeLithium polymer battery
Net weight42 grams (including watch and strap)
Strap materialSilicon
Adjustable length130-235 mm
Size46 * 46 * 12.9 mm
Device typeWireless Bluetooth device
Battery capacity300 mA
Display screen1.3" AMOLED screen
Case materialAlloy + Plastic
Buckle materialStainless steel
CompatibilityAndroid 4.4 i iOS 8.2 or above

Contact Information

Website: www.zeblaze.com

Email: Service@zeblaze.com

Manufacturer: ShenZhen Zeblaze Smart Company Limited

Address: Room 216-218, Yuan Xiong Building, Tongxing Road 26, Ban tian Street, Longgang District, Shenzhen, Guangdong, China.

PDF preview unavailable. Download the PDF instead.

58738 46500 eng 2230fc6e2b0b6a26d89df14828312395 Adobe PDF library 17.00 Adobe Illustrator(R) 24.0

Related Documents

Preview Zeblaze GTR 3Pro Smart Watch FCC Test Report
This FCC test report details the compliance of the Zeblaze GTR 3Pro Smart Watch with 47 CFR Part 15, Subpart C regulations, conducted by Shenzhen Huaxia Testing Technology Co., Ltd.
Preview Zeblaze Smartwatches: Product Catalog and Specifications
Explore the latest Zeblaze smartwatches, including models like Thor SQ, Beyond 3 Plus, Thor Ultra, Btalk series, Stratos series, GTS series, Vibe series, and GTR series, featuring detailed specifications and features.
Preview Zeblaze GTR 3Pro RF Exposure Evaluation Report
This report details the RF exposure evaluation for the Zeblaze GTR 3Pro smart watch, conducted by Shenzhen Huaxia Testing Technology Co., Ltd. It covers compliance with FCC standards, including SAR exclusion evaluation for BLE and BT functionalities.
Preview Zeblaze Stratos 2 Smartwatch User Manual and Specifications
This document provides comprehensive instructions, specifications, and safety guidelines for the Zeblaze Stratos 2 smartwatch. Learn how to set up, pair, operate, charge, and maintain your device.
Preview Zeblaze Ares 3 Pro User Manual
Comprehensive user manual for the Zeblaze Ares 3 Pro smartwatch, covering product features, operations, app connection, firmware updates, and safety instructions.
Preview Zeblaze Btalk 3 Plus Smartwatch: Specifications and Features
Detailed specifications and features of the Zeblaze Btalk 3 Plus smartwatch, including display, battery, health monitoring, activity tracking, and connectivity options. Supports multiple languages and offers extensive customization for fitness and wellness.
Preview Zeblaze Stratos 2 Plus User Manual
User manual for the Zeblaze Stratos 2 Plus smartwatch, detailing setup, usage, and features in multiple languages.
Preview Zeblaze Thor Ultra: Instrukcja Obsługi i Specyfikacja Smartwatcha
Kompletna instrukcja obsługi dla smartwatcha Zeblaze Thor Ultra. Dowiedz się o funkcjach, ładowaniu, wkładaniu karty SIM, specyfikacjach technicznych i konserwacji.