Zeblaze Ares 3 Pro User Manual
Product Introduction
This section provides an overview of the Zeblaze Ares 3 Pro smartwatch.
The watch features a display and a power key. It also includes a dedicated sport button.
Visual Description of Watch: The watch has a circular display with a bezel. There are two physical buttons on the right side of the watch case. The top button is labeled '1' and the bottom button is labeled '2'.
Button Operation
Long press the power button: Power on/off.
Short press the power key: Return to the main interface.
Short press the sport button: Enter the sport mode.
Screen Operation
Swipe up interface: Access message interface.
Scroll down interface: Access control center.
Left slide interface: Access activity interface.
Right slide interface: Access heart rate interface.
App Download
To use the full functionality of your smartwatch, download the "RiCloud Pro" app.
1. Search for "RiCloud Pro" on the App Store / Google Play / Huawei AppGallery.
2. Open the "RiCloud Pro" app interface, scan the QR code provided (if applicable) to download.
Note: The QR code is excluded from this HTML output.
Connect
Pair your watch with your smartphone using the "RiCloud Pro" app on your phone.
1. Open the "RiCloud Pro" app.
2. Navigate to "Device" > "Add Device" and select the model and connect.
3. Wait for a while to complete the pairing.
Note: To connect the watch and the phone successfully, you need to turn on the Bluetooth of the phone to connect the device.
Note: The application requires certain permissions to grant the location permission and enable Bluetooth information function of the mobile phone system; otherwise, the device may not be able to connect.
Firmware Upgrade
The app will prompt for a new firmware version, and the user can customize the App interface and select other functions for upgrade.
Upgrade Notice:
- The upgrade process can only be performed when the battery of the watch reaches 60%.
- During the upgrade process, the mobile phone's interface will prompt the upgrade progress. Please do not perform other operations on the watch or mobile phone.
- If the upgrade is successful, the watch interface will automatically restart before operating the watch.
Waterproof Protections
Waterproof grade: IP68
The waterproof performance of this product is not permanent and can degrade over time. The product is not suitable for hot showers, hot water, immersion, diving, surfing, and other activities in high-speed water or deep water. The waterproof effect will be reduced by contact with acids, alkalis, chemical reagents, and other chemical liquids.
Smart Watch Functions
Smart watch functions include: Blood Oxygen Detection, Blood Pressure Detection, Heart Rate Detection, Sleep Detection, Breathing Exercise, Exercise Mode, Remote Control Music, etc.
Basic Parameters
| Parameter | Specification |
|---|---|
| Host Size | 46.3 x 46.3 x 14.8 mm |
| Battery Capacity | 400 mAh |
| Bluetooth Version | BLE 5.2 |
| Screen Resolution | 400 x 400 Pixels |
| Screen Size | 1.43 inch |
| Sensor | HX3605 |
Maintenance
- Keep the product clean.
- Keep the product dry.
- Please wear the product correctly.
- For stains that are not easy to remove, it is recommended to scrub with alcohol.
Safety Instructions
1. Although smart watches can detect real-time heart rate, they cannot be used for any medical purpose.
2. The device is not waterproof for hot showers, hot water immersion, diving, surfing, and other high-speed water activities.
3. Please avoid strong impacts or vibrations on the product to prevent damage to the equipment and accessories, which may lead to equipment failure.
4. Do not disassemble or modify the equipment and accessories without authorization. If the equipment is not used for a long time, please power it off and store it in a dry place.
5. If the equipment is not used for a long time, please make sure to power it up once every three months.
