Monogram 48" Built-In Side-by-Side Refrigerator

Key Features

• Flush Inset Installation: Allows for installation flush with adjacent cabinetry.
• Advanced Temperature Management System with Multi-Shelf Air Tower: Ensures even air distribution.
• Climate-Control Drawer: Offers customizable temperature settings for express-chilling, express-thawing, and specific food preservation.
• WiFi Connect: Enables wireless control via smartphone.
• LED Lighting: Full-length interior light columns and illuminated drawers for clear visibility.
• GE® Water Filter: Relocated to the overhead cabinet for discreet placement.
• Deli Drawer on Full-Extension Slides: Provides easy access to meats, cheeses, and everyday foods.
• Sealed Vegetable Drawer: Designed to preserve food freshness.
• Adjustable Glass Shelves: Accommodates party trays and platters.
• Gallon-Size Door Bin: Suitable for milk containers and large bottles.
• Adjustable Door Bins: Offer flexible placement in seven locations.
• Dairy Bin with Center Divider: Features a magnetic seal for enhanced freshness.
• Filter-Change Indicator Light: Alerts when the water filter needs replacement.
• Sabbath Mode: Disables certain functions for observance.

Installation Types

The refrigerator supports both Standard Installation and Flush Inset Installation. Detailed diagrams and instructions are provided for each, including considerations for panel installation (1/4" Framed Panels and 3/4" Overlay Panels), anti-tip bracket placement, and custom side panels.

Dimensions and Specifications

Standard Installation Dimensions:

• Overall Width: 48" (121.92 cm)
• Overall Height: 84" (213.36 cm)
• Overall Depth: 25 3/4" (65.4 cm)
• Door Clearance: 28 5/8" (72.1 cm)
• Cutout Width: 47 1/2" (120.7 cm)
• Cutout Height: 84±.500" (212.1-214.6 cm)
• Cutout Depth: 24" (61 cm)
• Plumbing Requirements: 1/4" OD copper tubing or GE SmartConnect kit
• Shipping Weight: 775 lb

Flush Inset Installation Dimensions (with 3/4" custom panel):

• Overall Width: 50" (127.0 cm)
• Overall Height: 84 1/2" (214.6 cm)
• Overall Depth: 26" (66.0 cm)
• Door Clearance: 28 5/8" (72.1 cm)
• Cutout Width: 51" (129.5 cm)
• Cutout Height: 85" (215.9 cm)
• Cutout Depth: 26 3/16" (66.5 cm)
• Shipping Weight: 775 lb (351.5 kg)

Detailed diagrams illustrate clearances required for door swings (90° and 130°) and access to internal components.

Panel Customization

The refrigerator is designed for customization with decorative panels. Instructions are provided for:

• 1/4" Framed Panels: Decorative panels slide into the trim. Maximum panel weights are specified for fresh food door (75 lbs), freezer drawer (53 lbs), and grille panel (18 lbs).
• 3/4" Overlay Panels: Panels require a 1/4" backer panel and a 0.10" spacer panel. Instructions detail assembly with glue and screws, and routing for raised door and grille panels. Maximum panel weights are consistent with framed panels.

Door handles are not included and must be supplied by the cabinet maker. An optional visor handle kit (ZKLN) is available.

Electrical Requirements

A 115 volt 60Hz, 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. A properly grounded 3-prong electrical receptacle recessed into the back wall is necessary.

Safety Information

WARNING: The refrigerator is top-heavy and must be secured to prevent tipping. Failure to follow anti-tip instructions may result in death or serious injury. Specific instructions for securing the unit via anti-tip brackets are provided for various installation scenarios (under soffit, with wooden wall studs, with metal wall studs).

WARNING: Door Trim Pinch Point Hazard: Improper installation can lead to a finger pinch point hazard between the side door trim and cabinets. Follow installation instructions carefully regarding cabinet dimensions, trim assembly, and door stop angles to minimize this risk.

Contact Information

For questions about your appliance, please call 1-800-626-2000.