IECEx Certificate of Conformity
International Electrotechnical Commission
IEC Certification System for Explosive Atmospheres
For rules and details of the IECEx Scheme visit www.iecex.com
Certificate Details
Certificate No.: IECEX EPS 25.0013X
Status: Current
Date of Issue: 2025-07-22
Issue No: 0
Applicant Information
Applicant: i.safe MOBILE GmbH
i Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
Equipment
Equipment: IS-TH2ER.1 intrinsically safe mobile Scanner
Optional accessory: (Not specified)
Type of Protection: Intrinsic safety "i", optical radiation "op is"
Marking: Ex ib op is IIC T4 Gb, Ex ib op is IIIC T135°C Db
Manufacturing Locations
i.safe MOBILE GmbH
i Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
Standards Compliance
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
- IEC 60079-0:2017 Edition 7.0: Explosive atmospheres - Part 0: Equipment - General requirements
- IEC 60079-11:2023 Edition 7.0: Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
- IEC 60079-28:2015 Edition 2: Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
This Certificate does not indicate compliance with safety and performance requirements other than those expressly included in the Standards listed above.
Test & Assessment Reports
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
- Test Report: DE/EPS/EXTR25.0013/00
- Quality Assessment Report: DE/EPS/QAR12.0003/17
Equipment Description and Usage
The intrinsically safe and rugged mobile scanner IS-TH2ER.1 has been designed for the use in explosion hazardous areas of zone 1 and 21. In combination with mobile communication devices, the multifunctional set enables quick and easy scanning of any 1D or 2D barcodes at close range or at distances of more than 12 meters. The green laser is highly visible.
Electrical Data
The supply and interface connection of the IS-TH2ER.1 is carried out via the ISM interface of the compatible communication devices. The IS-TH2ER.1 is certified in combination with the IS540.1 or other mobile devices that comply with the connection parameters in accordance with document 1071AD04.
Specific Conditions of Use
YES as shown below:
- The 16-pin connector of the IS-TH2ER.1 may only be installed or removed from the ISM interface outside of potentially explosive areas.
- The device must be protected from impacts with high impact energy, against excessive UV light emission and high electrostatic charge processes.
- The permitted ambient temperature range is -20 °C to +55 °C.
Approval and Issuing Body
Approved for issue on behalf of the IECEx Certification Body:
Position: Head of Certification
Date: 2025-07-22
Certificate issued by: Bureau Veritas Consumer Products Services Germany GmbH
Businesspark A96
86842 Türkheim
Germany
[Official Seal Symbol]
General Certificate Conditions
- This certificate and schedule may only be reproduced in full.
- This certificate is not transferable and remains the property of the issuing body.
- The Status and authenticity of this certificate may be verified by visiting www.iecex.com or use of this QR Code [scan symbol].