EU - Type Examination Certificate

Equipment and Protective Systems for Potentially Explosive Atmospheres

Directive: 2014/34/EU

Equipment Details

Equipment: IS-TH2ER.1 intrinsically safe mobile Scanner

Manufacturer: i.safe MOBILE GmbH

Address: i.Park Tauberfranken 10, 97922 Lauda-Koenigshofen, Germany

Certificate Scope and Compliance

This certificate covers the equipment and any acceptable variations as specified in the annex and referred documentation.

Bureau Veritas Consumer Products Services Germany GmbH (notified body No. 2004) certifies that the equipment complies with the essential health and safety requirements of Directive 2014/34/EU for equipment intended for use in potentially explosive atmospheres.

Examination and test results are recorded under reference number: 25TH0054_00.

Compliance with essential health and safety requirements has been assured by compliance with the following standards:

• EN IEC 60079-0:2018
• EN 60079-11:2012 / IEC 60079-11:2023
• EN 60079-28:2015

Special Conditions and Marking

Special Conditions Indicator: The sign "X" after the certificate number indicates that the equipment is subject to special conditions for safe use, as specified in the annex.

Scope Limitation: This certificate relates only to the design and construction of the specified equipment according to Directive 2014/34/EU. Manufacturing and market placement requirements are not covered by this certificate.

Equipment Marking: The equipment marking shall include:

[Explosive Atmosphere Symbol] II 2G Ex ib op is IIC T4 Gb

[Explosive Atmosphere Symbol] II 2D Ex ib op is IIIC T135°C Db

Annex: Equipment Description and Conditions

Description of equipment: The IS-TH2ER.1 is an intrinsically safe and rugged mobile scanner designed for use in explosion hazardous areas of Zone 1 and 21. It enables quick and easy scanning of 1D or 2D barcodes at close range or distances over 12 meters when used with mobile communication devices. The green laser is highly visible.

Electrical data: Supply and interface connection are via the ISM interface of compatible communication devices. The IS-TH2ER.1 is certified in combination with the IS540.1 or other mobile devices compliant with document 1071AD04.

Reference number: 25TH0054_00

Special conditions for safe use:

• The 16-pin connector of the IS-TH2ER.1 must only be installed or removed from the ISM interface outside of potentially explosive areas.
• The device must be protected from impacts with high impact energy, excessive UV light emission, and high electrostatic charge processes.
• The permitted ambient temperature range is -20 °C to +55 °C.

Essential health and safety requirements: Met by compliance with standards.

Certification Details

[Certification Seal]

Issued at Tuerkheim, 2025-07-22

Signed by Ulrich Feike, Certification department of explosion protection.

Note: Certificates without signature and seal are void. Distribution is allowed only if not modified. Extracts or modifications require authorization from Bureau Veritas Consumer Products Services Germany GmbH.

Contact: Bureau Veritas Consumer Products Services Germany GmbH, www.bureauveritas.de/cps, certification.deu@bureauveritas.com