Cecotec Paprika 2000 Food Processor

Safety Instructions

Read these instructions thoroughly before using the device. Keep this manual for future reference or new users.

General Safety Precautions:

• Always follow safety instructions when using the appliance.
• WARNING: Incorrect or improper use can be dangerous for the user and the appliance. Use only for purposes described in this manual.
• Handle blades with care, especially during cleaning and emptying the container.
• Always unplug the appliance when unattended, before assembly, disassembly, or cleaning.
• This appliance is not intended for use by children. Keep it and its power cable out of their reach.
• Persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, may use the appliance if supervised or instructed on safe use and potential hazards.
• Children must not play with the device.
• This device is designed for domestic use only and is not intended for commercial use (bars, restaurants, farms, hotels, motels, offices).
• The appliance is not designed to operate via timers or remote control systems.
• Do not use accessories not provided by Cecotec, as this may damage the product or cause injury.
• Cleaning and maintenance tasks must not be carried out by children.
• Do not process hot food or boiling liquids. Allow them to cool down before processing.
• Ensure mains voltage matches the rating label and the plug is earthed.
• Do not immerse the cable, plug, or any other part of the device in water or other liquids. Keep electrical connections dry. Ensure hands are dry before handling the plug or switching on.
• Unplug the appliance when not in use, before assembly/disassembly, and before cleaning.
• Regularly check the power cable for visible damage. If damaged, it must be repaired by official Cecotec Technical Support to avoid danger.
• Do not use outdoors, near electric/gas plates, open flames, or inside an oven.
• Do not twist, bend, pull, or damage the power cable. Protect it from sharp edges and heat sources. Keep the cable away from hot surfaces and worktop edges.
• Do not plug in until fully assembled. Ensure it is unplugged before disassembling or handling blades.
• Do not insert utensils into the product during operation to reduce the risk of splashing or injury. Handle with care.

Parts and Components

The food processor includes the following parts:

• Base (with power knob)
• Food pusher
• Processing vessel lid
• Tool holder
• Processing vessel
• Cutting blades unit
• Kneading blade
• Blade holder disc
• Fine grinding blade
• Thin cutting blade
• French fries blade
• Emulsifying disc

Diagram Description: The diagram (Fig. 1) illustrates the main components of the food processor, showing the base with the power knob (a), the food pusher (2), the processing vessel lid (3), the tool holder (4), the processing vessel (5), and various blades and discs (6-12) that fit into the tool holder.

Before Use

The device is packaged to protect it during transport. Remove from box and packaging materials. Keep original packaging for future transport or dispose of responsibly by recycling.

Ensure all parts and components are included and in good condition. Contact Cecotec Technical Support Service immediately if any are missing or damaged.

Clean components that contact food with water and a non-abrasive detergent before first use.

Assembly

Follow these steps for assembly, considering the food to be processed:

1. Place the processing vessel onto the base, ensuring it fits into the grooves and is stable.
2. Place the tool holder onto the motor shaft, ensuring it is fixed and rotates with the shaft.
3. Attach your chosen blade or disc to the tool holder. Options include cutting blades, kneading blades, stirrers, or disc holders with various inserts.
4. If using a blade, place the lid over the processing bowl. If necessary, push food into the recess to press it against the disc holder. The lid should fit securely and be stable.

Operation

The power selector has three modes/speeds:

• Speed 1: Generally powerful enough for most foods. Use at the start of processing.
• Speed 2: Use if food hardness or shape requires extra power.
• PULSE mode (P): Provides maximum power while active. Ideal for chopping or grinding hard ingredients requiring short, powerful bursts.

The processor is designed for shredding, chopping, squeezing, and kneading.

Cleaning and Maintenance

Cleaning:

• To clean blades, rinse the jug with water. Fill with 400 ml lukewarm water and a little detergent. Close lid and run in PULSE mode for 2 seconds at a time, repeating as needed.
• After cleaning, set selector to "0", switch off, and unplug.
• Clean with water only. Do not use abrasive or chemical cleaners.
• Never submerge the motor base or blade holder in water.
• Clean the motor base with a soft, dry cloth.
• Dishwasher-safe parts include: food pusher, processing vessel lid, tool holder, cutting blades unit, plastic kneading blade, blade support disc holder, fine shredding blade, thin cutting blade, french fries blade, and emulsifying disc.

Maintenance: If the product malfunctions, makes unusual noises, or vibrates excessively, stop use and contact Cecotec Technical Support. Do not attempt self-repair.

Storage: After cleaning, ensure the appliance is thoroughly dried before storing. Store in a dry, safe place, away from direct sunlight and out of reach of children.

Troubleshooting

Technical Specifications

• Product Reference: 04356
• Product: Paprika 2000
• Power: 1300 W
• Engine blocking power: 2000 W
• Voltage: 220-240 V
• Frequency: 50/60 Hz

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain.

Disposal of Old Electrical and Electronic Appliances

This symbol indicates that the product and/or batteries must be disposed of separately from household waste, according to applicable regulations. When the product reaches its end of life, remove batteries/accumulators and take them to a designated local collection point. Contact local authorities or retailers for detailed disposal information. Compliance with these guidelines helps protect the environment.

Technical Support and Warranty

Cecotec is liable for conformity defects existing at the time of delivery, as per applicable regulations. Repairs should be carried out by qualified personnel.

For any problems or queries, contact the official Cecotec Technical Support Service at +34 963 210 728.

Copyright

Intellectual property rights for this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. Reproduction, storage, transmission, or distribution of this publication, in whole or in part, by any means is prohibited without prior authorization from CECOTEC INNOVACIONES, S.L.