iPega PG-9090 Blue Elf Wireless Controller User Manual

Application Instruction

• New upgraded gamepad, direct connect & Play, easy to operate, no activation, directly play, no APP needed. (System requirements: support for Android systems above 6.0, iOS systems 11.0~13.3.1).
• The product is suitable for operating games on Android mobile (tablet)/iOS mobile (tablet) / Android smart TV/P3 console/N-S console/PC through wireless connection, as well as P3 console/N-S console/PC computer over a wired connection.
• Design with telescopic phone stand (Extend maximum size 45-80mm).
• Ergonomic structure, comfortable hand feeling.

Note: Due to mobile phone system problems, individual mobile phones may not support this device (e.g. the mobile phones of the Media Tek platform can not support it). Due to the official game platform software upgrade or source code changes and other not resist factors caused of some games can not be played or connected with our gamepad. iPega has no responsibility, iPega reserves the right of final interpretation.

Instruction for Key Function

When using this product, please place the device horizontally, make sure the HOME key is on the right, restore the game's buttons to their default settings.

Controller Layout Description:

• Left Side: L1/L2 buttons, HOME (Power Switch) button, D-PAD (directional pad), SELECT button, TURBO button, LEFT 3D & L3 (Down Press).
• Right Side: R1/R2 buttons, MODE LED, A/B/X/Y BUTTONS, START button, MENU button, RIGHT 3D & R3 (Down Press).
• Bottom Center: 2.4G Wireless dongle.

Operation Instructions

Direct Play Mode (Android V3)

Press A+ 🏠 for 2 seconds to enter direct play mode (Android V3), then search "PG-9090" on mobile BT and pair. LED1 will be always on after connected successfully. Once connected, press 🏠, LED flashes slowly, reconnect automatically.

Mapping for Direct Play Mode: Check the default operation. If you need to modify the buttons, download "Shootingplus" App and set up the mapping from the app. Search "www.ipega.hk" for detailed operation.

Android Standard Game Mode

Press X+ 🏠 for 3 seconds to enter the mode and pairing. LED3 flashes. Search "PG-9090" on Android mobile/tablet/smart TV and connect. After connected successfully, LED3 is always on. When the device is connected, if it's in sleep mode, press 🏠 to reconnect automatically. You can directly play simulator games, or download Gamepad enabled games from Google Play Store. Recommended games: Fortnite, Implosion, Dead Trigger, Dead Effect, CS Portable.

Direct Play Mode (iOS V3)

Press Y+ 🏠 for 2 seconds to enter direct play mode (iOS V3). LED2 will flash quickly, then search "PG-9090" on mobile BT and pair. LED2 will be always on after connected successfully. Once connected, press 🏠, LED2 flashes slowly, reconnect automatically.

Wired Mode (Connecting by USB Data Cable)

The controller automatically recognizes different modes under wired mode. Press "R1" button while plugging in the USB data cable. LED1 & LED3 flash quickly. Supports Windows PC, Android device, P3, and N-S.

1. PC Connection Method: Press "R1" button while plugging the USB data cable to Windows PC (The default mode is X-input 360 mode). LED3 is always on. Press and hold "select+start" for 3 seconds to switch to D-input mode, LED2 is always on.
2. P3/N-S/Android Connection Method: Press and hold "R1" button while plugging the USB data cable to the console. The LED light will be always on after successfully connected. (The console will distribute LED indicator light automatically).

2.4G Mode

Insert the 2.4G receiver into the USB interface of a compatible PC, Android device, PS3 Console, or N.S Console. At the same time, press L1+ 🏠 for 3 seconds to enter 2.4G receiver mode. LED1 and LED2 flash. Both indicators will be always on after successfully connected. When the device is connected, press 🏠 to reconnect if in sleep mode.

Charging, Sleep, Wake Up & Turn Off Function

1. Charging Function:
   • Low power: LED4 flashes quickly to indicate charging.
   • Charging: LED4 flashes slowly.
   • Fully charged: LED4 is always on.
2. Sleep/Wake Up/Turn Off Function:
   • The gamepad will enter sleep mode if without operation for 5 minutes.
   • Press 🏠 button to reconnect.
   • Long press 🏠 for 3 seconds to turn off the device. All LED indicators will be off.

Charging port is located at the top of the controller.

Electrical Parameters

• Working voltage: DC3.7V
• Working current: <20mA
• Static current: <15uA
• Continuous gameplay time: >15H
• Charging voltage/current: DC5V/500mA
• Charging time: almost 2 hours
• BT 5.0, transmission distance: ≤8M
• Battery capacity: 300mAh
• Standby time: up to 30 days once fully charged

TURBO/MENU Function

1. Action buttons (A/B/X/Y/L1/L2/R1/R2) can all be set up for the TURBO function.
2. Setting Method: Long press any action button first, then press TURBO to start up. To shut off, long press the action button, then press TURBO.
3. The TURBO function will be cleared automatically as soon as the product enters sleep mode, powers off, or is re-turned on. It needs to be re-set up.
4. Different Android devices have different menu modes. Press the MENU button on the gamepad, and the mobile will display a MENU interface for the user to manage. Press the button again to exit.

Remarks: This function only supports parts of Android devices.

Notes

1. Please do not store this product in wet or high-temperature areas.
2. Do not knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage.
3. The product has built-in batteries; do not discard them with general garbage.
4. Do not charge the controller near fire or other heat sources.
5. Non-professional personnel should not disassemble the product, otherwise it will not be covered by the after-sales warranty service.

Accessories List

• Gamepad x1
• D-pad x1
• User Manual x1
• Micro USB cable x1
• 2.4G receiver x1