Adexa E10C10C32 Gas BBQ Grill Assembly Instructions
This document provides comprehensive instructions for assembling the Adexa E10C10C32 Gas BBQ Grill. It includes a detailed parts list and step-by-step guidance based on the provided diagrams.
Parts List
The package contains the following components:
- Part 1: Base Plate (1 pc)
- Part 2: Main Grill Body/Frame (1 pc)
- Part 3: Control Knob (1 pc)
- Part 4: Wheel Cover (1 pc)
- Part 5: Hanging Basket (1 pc)
- Part 6: Wire Grill Grate (1 pc)
- Part 7: New Insulation Net (1 pc)
- Part 8: Support Bracket (1 pc)
- Part 9: Support Bracket (1 pc)
- Part 10: Side Panel/Support (2 pcs)
- Part 11: Side Panel/Support (2 pcs)
- Part 12: Right Wheel Assembly (1 pc)
- Part 13: Wheel Assembly Component (2 pcs)
- Part 14: Left Wheel Assembly (1 pc)
- Part 15: Support Component (1 pc)
- Part 16: Support Component (1 pc)
- Part 17: Support Component (1 pc)
- Part 18: Support Component (2 pcs)
- Part 19: Mounting Bracket (2 pcs)
- Part 20: Mounting Bracket (1 pc)
- Part 21: Mounting Bracket (1 pc)
- Part 22: Mounting Bracket (1 pc)
Hardware Included:
- Screw Type A: M5-55*10 (5 pcs)
- Screw Type B: M5-10*12 (10 pcs)
- Screw Type C: M5*4 (4 pcs)
- Screw Type D: Fastener (2 pcs)
- Screw Type E: Fastener (2 pcs)
- Screw Type F: M5-16*6 (6 pcs)
Assembly Steps
Follow these steps to assemble your Adexa E10C10C32 Gas BBQ Grill:
- Step 1: Attach the wheel assemblies. Connect the right wheel assembly (Part 12) and the left wheel assembly (Part 14) to the main grill body (Part 2). Use the wheel assembly components (Part 13) as needed. Secure using the appropriate fasteners.
- Step 2: Attach the base plate (Part 1) to the bottom of the main grill body (Part 2). Use screws such as Type B (M5-10*12) or Type F (M5-16*6) as indicated in the diagrams.
- Step 3: Mount the side panels/supports (Parts 10 and 11) to the sides of the main grill body (Part 2).
- Step 4: Install the hanging basket (Part 5) and the wire grill grate (Part 6) into their designated slots within the grill.
- Step 5: Position and secure the new insulation net (Part 7) within the grill chamber.
- Step 6: Attach the control knob (Part 3) to the front control panel of the grill.
- Step 7: Fit the wheel cover (Part 4) onto the wheel assembly.
- Step 8: Assemble and attach the various support brackets and mounting plates (Parts 8, 9, 15, 16, 17, 18, 19, 20, 21, 22) to reinforce the structure and attach accessories. Use the specified hardware types (A, B, C, D, E, F) according to the visual guides. For instance, use Screw Type A (M5-55*10) for specific structural connections, Screw Type B (M5-10*12) for general assembly, and Screw Type C (M5*4) for smaller fittings.
- Step 9: Ensure all connections are firm and secure.
Note: Refer to the original diagrams for precise placement and orientation of all parts and hardware.
