Assembly Instruction

Instruction d'Assemblage

Item No: 1146BE/GY-1, 1146NABE/NAGY-1 Accent Chair

Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware before assembly. Parts that appear to be missing are often found in the packing materials. If you do not have all parts listed, have your dealer contact us and they will be sent to you immediately.

It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing furniture on a wood floor or other hard surface, and to limit indentation and prevent discoloration if placing on carpet.

Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.

Parts List / Liste de Pièces

NO	DESCRIPTION	SKETCH	QTY
A	Back Cushion / Dossier	[Cushion Sketch]	1 PC
B	Seat Cushion / Siège	[Cushion Sketch]	1 PC
C	LSF Arm / Bras Gauche	[Arm Sketch]	1 PC
D	RSF Arm / Bras Droite	[Arm Sketch]	1 PC
E	LSF Rear leg	[Leg Sketch]	1 PC
F	RSF Rear leg	[Leg Sketch]	1 PC
G	Seat Frame	[Frame Sketch]	1 PC
H	Back Rest	[Back Rest Sketch]	1 PC

Hardware List / Liste de Quincaillerie

NO	DESCRIPTION	SKETCH	QTY
1	JCBC Bolt / Boulon M6 x 70mm	[Bolt Sketch]	4 PCS
2	JCBC Bolt / Boulon M6 x 50mm	[Bolt Sketch]	6 PCS
3	JCBC Bolt / Boulon M6 x 40mm	[Bolt Sketch]	4 PCS
4	Flat Washer / Rondelle Plate M6 x 19mm	[Washer Sketch]	4 PCS
5	Wood Dowel / Goujon En Bois M10 x 30mm	[Dowel Sketch]	4 PCS
6	Barrel Nut / Écrou M6 x 13mm	[Nut Sketch]	4 PCS
7	Allen Key / Clé Allen Wrench M4	[Allen Key Sketch]	1 PC

*Above hardware are packed in 1146BE/GY/NABE/NAGY-1 for assembly. / Le quincaillerie est dans 1146BE/GY/NABE/NAGY-1 pour l'assemblage.

Step 1 / Étape 1

[Diagram showing assembly of parts E, F, D, C with hardware 5, 6, 7. Arrows indicate connection points. A note indicates to use 2x for part 5.]

Step 2 / Étape 2

[Diagram showing assembly of parts C, D, H, F, E with hardware 1, 7. A note indicates to please assemble on a smooth surface.]

Step 3 / Étape 3

[Diagram showing assembly of parts G, E, F with hardware 2, 6, 7. Arrows indicate connection points.]

Step 4 / Étape 4

[Diagram showing placement of part B onto the assembled frame.]

Step 5 / Étape 5

[Diagram showing attachment of part A to the chair frame with hardware 3, 4, 7. A note indicates to not fully tighten JCBC bolts until all are attached.]

Step 6 / Étape 6

[Diagram showing the completed chair with part A attached.]

Assembly Complete / Assemblage Complete

[Image of the fully assembled accent chair.]

Made in Malaysia / Fabriqué en Malaisie

	Accent Chair Assembly Instructions - Model 194840309116 Official assembly instructions for the Accent Chair (Item No: 194840309116). Includes detailed parts list, hardware list, and step-by-step visual guides in English and French for easy furniture assembly.
	Assembly Instructions for 194840303886 Accent Chair Step-by-step assembly guide for the 194840303886 Accent Chair, including a detailed parts list, hardware list, and visual descriptions of each assembly stage. Ensure all parts are present before beginning assembly.
	Assembly Instructions for Accent Chair - Model 194840326816 Step-by-step assembly instructions for the Accent Chair, model number 194840326816. Includes parts list, hardware list, and detailed assembly diagrams with textual descriptions. Made in Malaysia.
	Accent Chair Assembly Instructions - Item 194840316879 Step-by-step assembly guide for the Accent Chair (Item No: 194840316879), including parts list, assembly steps, and care instructions. Learn how to assemble your new chair safely and efficiently.
	Accent Chair with Cane Back - Product Dimensions Explore the detailed dimensions of this elegant accent chair, featuring a cane back and upholstered seat. Ideal for interior design planning, providing precise measurements for height, width, depth, and seat dimensions.