IKEA LÖNSET Adjustable Slatted Bed Base Assembly Instructions

Parts List

Ensure all parts are present before beginning assembly.

Hardware:

16x Screw (Part No. 100229)
2x Screw (Part No. 114559)
6x Screw (Part No. 109049)
4x Screw (Part No. 109594)
4x Washer (Part No. 100823)
2x Washer (Part No. 108383)
2x Nut (Part No. 100718)
2x Nut (Part No. 121786)

Components:

1x Allen Key (Part No. 100006)
1x Allen Key (Part No. 108490)
2x Lifting Mechanism Bracket (Part No. 131190)
2x Lifting Mechanism Bracket (Part No. 131189)
2x Lifting Mechanism Assembly (Part No. 131188)
2x Elastic Strap (Part No. 139221)
1x Central Support Bar (Part No. 124138)
6x Curved Slats
4x Curved Slats
12x Curved Slats
6x Curved Slats
1x Straight Slats
1x Straight Slats
2x Straight Slats
2x Frame Side Rails with pre-attached fittings

Tools required: Screwdriver [screwdriver-icon], Wrench [wrench-icon].

Assembly Steps

Step 1: Attach Bracket to Frame

Take one frame side rail. Attach a lifting mechanism bracket (131189) to the designated holes using one screw (109594). Ensure the bracket is oriented correctly as shown in the diagram. [Diagram shows a hand screwing a bracket onto a frame rail with a screw.]

Step 2: Attach Plastic Fitting to Frame

Attach a plastic fitting to the frame side rail using the Allen key (100006) and one screw (100229). The diagram indicates correct placement and orientation. [Diagram shows a hand using an Allen key to screw a fitting onto a frame rail. Crossed-out images show incorrect placement.]

Step 3: Attach Another Plastic Fitting

Attach another plastic fitting to the same frame side rail using one screw (100229). Ensure correct alignment. [Diagram shows a hand screwing a fitting onto a frame rail. Crossed-out images show incorrect placement.]

Step 4: Insert Curved Slats (Part 1)

Insert six (6x) curved slats into the plastic fittings on the frame side rail. Push them firmly into place. [Diagram shows curved slats being inserted into fittings.]

Step 5: Attach Second Bracket

Attach a lifting mechanism bracket (131190) to the other end of the same frame side rail using one screw (100006) and one nut (100718). [Diagram shows a hand screwing a bracket onto a frame rail with a screw and nut.]

Step 6: Attach Fittings to Second Frame Rail

Take the second frame side rail. Attach plastic fittings using screws (100229) as shown in the diagrams. [Diagram shows hands screwing fittings onto the second frame rail.]

Step 7: Insert Curved Slats (Part 2)

Insert twelve (12x) curved slats and six (6x) curved slats into the plastic fittings on the second frame side rail. [Diagram shows curved slats being inserted into fittings.]

Step 8: Attach Central Support Bar

Attach the central support bar (124138) to the frame structure using three (3x) screws (100229). [Diagram shows the support bar being screwed into the frame.]

Step 9: Attach Lifting Mechanism (Part 1)

Attach the lifting mechanism assembly (131188) to the frame side rails. Use two (2x) screws (114559) and the corresponding washers (108383, 100718, 121786) for each side. [Diagram shows a hand screwing the lifting mechanism to the frame with screws and washers.]

Step 10: Insert Elastic Straps

Insert the elastic straps (139221) into the designated slots on the plastic fittings. Ensure they are securely seated. [Diagram shows elastic straps being pushed into fittings.]

Step 11: Insert Remaining Slats

Insert the remaining six (6x) curved slats and the straight slats (1x, 1x, 2x) into their respective fittings on both frame rails. [Diagram shows slats being inserted into fittings.]

Step 12: Attach Lifting Mechanism (Part 2)

Connect the other end of the lifting mechanism assembly (131188) to the frame. Use two (2x) screws (100823) and the Allen key (109049) for each connection. [Diagram shows a hand using an Allen key to screw the lifting mechanism to the frame.]

Step 13: Connect Mechanism Brackets

Attach the lifting mechanism brackets (131188) to the main frame structure. Ensure they are correctly aligned. [Diagram shows mechanism brackets being attached to the frame.]

Step 14: Secure Lifting Mechanism Arms

Connect the arms of the lifting mechanism to the frame. Listen for a 'Click!' sound to confirm a secure connection. [Diagram shows the lifting mechanism arms being connected, with a 'Click!' indicator.]

Step 15: Final Mechanism Check

Perform a final check on the lifting mechanism connections. Use two (2x) screws (100823) and the Allen key (109049) if any adjustments are needed. [Diagram shows a hand using an Allen key to tighten screws on the mechanism.]

Step 16: Final Assembly

The LÖNSET adjustable slatted bed base is now assembled. The central support bar (124138) should be correctly positioned. [Diagram shows the completed bed base.]

	IKEA LÖNSET Bed Base Assembly Instructions Step-by-step guide for assembling the IKEA LÖNSET bed base, including parts list and assembly steps, with detailed textual descriptions of diagrams and icons.
	IKEA LÖNSET Adjustable Slatted Bed Base Assembly Instructions Comprehensive guide to assembling the IKEA LÖNSET adjustable slatted bed base, detailing each step with parts and actions.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Detailed assembly guide for the IKEA LÖNSET slatted bed base. This document provides step-by-step instructions, a parts list, and visual aids to help you correctly assemble your bed base. Includes all necessary hardware and components for a secure and functional bed base.
	LÖNSET Slatted Bed Base Assembly Instructions Step-by-step assembly guide for the IKEA LÖNSET slatted bed base, including parts list, hardware, and assembly steps for a secure and comfortable bed.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Step-by-step guide to assembling the IKEA LÖNSET slatted bed base, including parts list, tools required, and assembly steps. Features detailed diagrams and clear instructions for a comfortable and supportive bed base.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Comprehensive guide for assembling the IKEA LÖNSET slatted bed base, detailing parts, tools, and step-by-step instructions for a secure and proper setup.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions A comprehensive guide to assembling your IKEA LÖNSET slatted bed base. This manual details all parts, tools, and step-by-step instructions for a successful setup.
	IKEA LÖNSET Slatted Bed Base Assembly Instructions Step-by-step assembly guide for the IKEA LÖNSET slatted bed base, including parts list, tools required, and visual aids described in text.