INSTALLATION INSTRUCTIONS

E7 BLOWER KIT FOR 5 TON COOLING AIRFLOW

This kit is intended to provide increased airflow over the factory installed E7 blower assembly.

IMPORTANT SAFETY INFORMATION

INSTALLER: Please read all instructions before servicing this equipment. Pay attention to all safety warnings and any other special notes highlighted in the manual. Safety markings are used frequently throughout this manual to designate a degree or level of seriousness and should not be ignored. WARNING - Indicates a potentially hazardous situation that if not avoided, could result in personal injury or death.

[!] WARNING:

ELECTRICAL SHOCK, FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious injury or property damage.

Improper servicing could result in dangerous operation, serious injury, death or property damage.

Installation Steps

  1. Disconnect all power to the unit and remove the door.
  2. Remove the left access panel, and disconnect the motor power and signal wires from the control board.
  3. Remove the 4 screws securing the blower housing and slide the assembly out of the unit.
  4. Install the new assembly in the same location while making sure the housing flanges slide underneath the blower deck tabs.
  5. Route the motor power and signal wires to the board and connect them according to the existing wiring diagram.
  6. Adjust the HEAT and COOL dipswitch settings for the desired airflow.
  7. Reinstall access panel and door and restore power to the unit.

Performance Data: External Static Pressure

DIP SWITCH SETTING EXTERNAL STATIC PRESSURE (IN W.C.)
1/4 2/5 3/7 4/8 0.1 0.2 0.3 0.4 0.5 0.6
0000681640605580526485
1000800761726699649617
0100919881847818773749
11001,0381,002968937896881
00101,1451,1101,0791,0441,007984
10101,2521,2191,1911,1501,1181,087
01101,3591,3271,3021,2571,2291,190
11101,4371,4061,3791,3381,3061,267
00011,5161,4861,4561,4181,3831,343
10011,5941,5651,5331,4991,4601,420
01011,6611,6321,5981,5651,5281,489
11011,7271,6981,6631,6311,5951,557
00111,7941,7651,7281,6971,6631,626
10111,8421,8111,7781,7451,7121,677
01111,8891,8561,8271,7941,7611,728
11111,9371,9021,8771,8421,8101,779
Models: E7 Blower Kit, E7, Blower Kit

PDF preview unavailable. Download the PDF instead.

10349210 Adobe PDF Library 16.0.7 Adobe InDesign 17.4 (Windows)

Related Documents

Preview High Airflow Blower Kit Installation Instructions for E7 Furnaces
Installation instructions for the Nortek Global HVAC High Airflow Blower Kit designed to increase airflow for cooling in E7 series electric furnaces. Includes safety warnings, step-by-step installation guide, and technical data tables.
Preview KG7S Series High Efficiency Gas Furnaces Technical Specifications
Detailed technical specifications, features, benefits, and performance data for the KG7S Series High Efficiency Upflow/Horizontal and Downflow Gas Furnaces by Nortek Global HVAC. Includes model identification, dimensions, airflow data, and accessories.
Preview Nortek Global HVAC E7 Series Electric Furnace Replacement Parts List
Comprehensive replacement parts list for Nortek Global HVAC E7 Series electric furnaces, covering models -010, -012, -015, -017, -020, and -023. Includes part numbers for blower motors, control boards, elements, filters, doors, and more.
Preview E7 Series Electric Furnaces: Technical Specifications, Features, and Accessories
Comprehensive technical specifications, features, benefits, model identification, electrical data, physical dimensions, airflow data, and accessories for the E7 Series Electric Furnaces manufactured by Nortek Global HVAC.
Preview Nortek Global HVAC E7 Series Electric Furnaces Technical Specifications
Detailed technical specifications, features, benefits, model identification, electrical specifications, and accessories for the Nortek Global HVAC E7 Series Electric Furnaces.
Preview MG2R & MG2S Downflow Gas Furnace User Manual
User's manual for MG2R single-stage and MG2S two-stage condensing gas furnaces, covering installation, operation, maintenance, and safety warnings. Includes information on gas supply, venting, clearances, troubleshooting, and furnace components.
Preview B6BV Series Air Handler Technical Specifications and Features
Detailed technical specifications, features, benefits, electrical data, dimensions, and blower performance data for the B6BV Series Air Handler by Nortek Global HVAC.
Preview Nortek Global HVAC KG7TC Series Smartlite Gas Furnaces: Technical Specifications
Comprehensive technical specifications, features, and installation guidelines for Nortek Global HVAC's KG7TC Series Smartlite gas furnaces, highlighting AFUE ratings, ECM blower technology, and model details.