Manuals+
Mi-Light Smart Panel Remote Controller User Instruction

Mi-Light Smart Panel Remote Controller

Model No.: T1 / T2 / T3 / T4 & B1 / B2 / B3 / B4

1. Product Features

The Smart Panel Remote Controller is a newly developed remote controller featuring a delicate and fashionable tempered glass panel. It utilizes a high-precision capacitive touch screen IC for stable operation. The controller offers 2.4GHz high RF wireless control with long-distance capability, low power consumption, and high-speed transmission rates.

The product is available in T series and B series, differing in their power supply methods. Both series come in four types:

  • T1/B1: 4-zone dimmable panel remote controller
  • T2/B2: 4-zone CCT (Correlated Color Temperature) panel remote controller
  • T3/B3: 4-zone RGB/RGBW panel remote controller
  • T4/B4: 4-zone RGB+CCT panel remote controller

This product is widely compatible with Mi-Light's smart LED Lighting, LED Controllers, and Smart panel controllers.

Compatible Panel Remote Controllers
Panel Remote Controller NameCompatible Remote ModelCompatible products
4-Zone Brightness Dimming Panel Remote ControllerFUT091Brightness dimming series
4-Zone CCT Adjust Panel Remote ControllerFUT091CCT adjust series
4-Zone RGB/RGBW Panel Remote ControllerFUT095/FUT096RGB / RGBW series
4-Zone RGB+CCT Panel Remote ControllerFUT092RGB / RGBW RGB+CCT series

2. Technical Parameters

B Series: Powered by 3V (2*AAA Battery)

Dimensions: Approximately 86mm x 86mm x 20mm.

Working Temperature: -20°C to 60°C

Input Voltage: 3V (2*AAA Battery)

Radio Frequency: 2400-2483.5MHz

Modulation Method: GFSK

Transmitting Power: 6dBm

Control Distance: 30m

Standby Power: 20uA

T Series: Powered by AC90-110V or AC180-240V

Dimensions: Approximately 86mm x 86mm x 33mm.

Working Temperature: -20°C to 60°C

Input Voltage: AC90-110V or AC180-240V

Radio Frequency: 2400-2483.5MHz

Modulation Method: GFSK

Transmitting Power: 6dBm

Control Distance: 30m

3. Installation/ Dismantlement

T Series Installation/ Dismantlement

The T series is typically wall-mounted. The process involves connecting wires to the controller and then mounting it to the wall, often requiring a wall box.

B Series Installation/ Dismantlement

The B series can be installed using double-sided adhesive for mounting onto surfaces, or potentially wired into a wall mount.

4. Attention

  • Please check the wiring and ensure the circuit is correct before powering on the device.
  • When installing, handle the glass panel with care to avoid breakage.

Certifications: CE, RoHS

Origin: Made in China

5. Function of keys

Remark: When touching a button, the LED indicator lamp will flash once with a distinct sound. Touch sliders operate without sound.

B1 & T1: 4-Zone Brightness Dimming

Controls:

  • Dimming Slider: [Brightness Slider] - Used to change brightness from 1% to 100%.
  • 60S Delay OFF: [60s Delay OFF Button] - When the light is ON, pressing this button will turn the light OFF automatically after 60 seconds.
  • ALL ON: [ALL ON Button] - Touch to turn on all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • Zone ON: [Zone ON Button] - Touch to turn on zone-linked lights.
  • Zone OFF: [Zone OFF Button] - Touch to turn off zone-linked lights.
  • ALL OFF: [ALL OFF Button] - Touch to turn off all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • 4x(un) Link Light: [Link/Unlink Button] - Used for linking and unlinking lights to specific zones or the master controller.

Link/Unlink Procedure:

Link: First, power off the device. Then, power it on. Within 3 seconds, touch any of the Zone ' | ' buttons 3 times shortly. The link is confirmed when the light blinks 3 times. If not, try again.

Unlink: First, power off the device. Then, power it on. Within 3 seconds, touch the linked Zone ' | ' button or the Master ' | ' button 5 times shortly. The unlink is confirmed when the light blinks 9 times. If not, try again.

B2 & T2: 4-Zone CCT Adjust

Controls:

  • CCT Slider: [Color Temperature Slider] - Used to change the color temperature of the light.
  • Dimming Slider: [Brightness Slider] - Used to change brightness from 1% to 100%.
  • 60S Delay OFF: [60s Delay OFF Button] - When the light is ON, pressing this button will turn the light OFF automatically after 60 seconds.
  • ALL ON: [ALL ON Button] - Touch to turn on all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • Zone ON: [Zone ON Button] - Touch to turn on zone-linked lights.
  • Zone OFF: [Zone OFF Button] - Touch to turn off zone-linked lights.
  • ALL OFF: [ALL OFF Button] - Touch to turn off all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • 4x(un) Link Light: [Link/Unlink Button] - Used for linking and unlinking lights to specific zones or the master controller.

Link/Unlink Procedure:

Link: First, power off the device. Then, power it on. Within 3 seconds, touch any of the Zone ' | ' buttons 3 times shortly. The link is confirmed when the light blinks 3 times. If not, try again.

Unlink: First, power off the device. Then, power it on. Within 3 seconds, touch the linked Zone ' | ' button or the Master ' | ' button 5 times shortly. The unlink is confirmed when the light blinks 9 times. If not, try again.

B3 & T3: 4-Zone RGB/RGBW

Controls:

  • Color Slider: [Color Selection Slider] - Used to choose the desired color.
  • Dimming Slider: [Brightness Slider] - Used to change brightness from 1% to 100%.
  • White Button: [White Button] - Touch to switch to white light mode.
  • Mode Button: [Mode Button] - Used for switching through dynamic modes.
  • Speed- Button: [Speed Down Button] - Slows the speed of the current dynamic mode.
  • Speed+ Button: [Speed Up Button] - Accelerates the speed of the current dynamic mode.
  • ALL ON: [ALL ON Button] - Touch to turn on all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • Zone(1-4) ON: [Zone ON Button] - Touch to turn on zone-linked lights.
  • ALL OFF: [ALL OFF Button] - Touch to turn off all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • Zone(1-4) OFF: [Zone OFF Button] - Touch to turn off zone-linked lights.
  • 4x(un) Link Light: [Link/Unlink Button] - Used for linking and unlinking lights to specific zones or the master controller.

Link/Unlink Procedure:

Link: First, power off the device. Then, power it on. Within 3 seconds, touch any of the Zone ' | ' buttons 1 time shortly. The link is confirmed when the light blinks 3 times. If not, try again.

Unlink: First, power off the device. Then, power it on. Within 3 seconds, long press the Zone ' | ' button or the Master ' | ' button. The unlink is confirmed when the light blinks 9 times. If not, try again.

B4 & T4: 4-Zone RGB+CCT

Controls:

  • CCT Slider/ Saturation: [Color Temperature/Saturation Slider] - Under white light mode, touch to change color temperature. Under color mode, touch to change saturation.
  • Color Slider: [Color Selection Slider] - Used to choose the desired color.
  • Dimming Slider: [Brightness Slider] - Used to change brightness from 1% to 100%.
  • White Button: [White Button] - Touch to switch to white light mode.
  • Mode Button: [Mode Button] - Used for switching through dynamic modes.
  • Speed- Button: [Speed Down Button] - Slows the speed of the current dynamic mode.
  • Speed+ Button: [Speed Up Button] - Accelerates the speed of the current dynamic mode.
  • ALL ON: [ALL ON Button] - Touch to turn on all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • Zone(1-4) ON: [Zone ON Button] - Touch to turn on zone-linked lights.
  • ALL OFF: [ALL OFF Button] - Touch to turn off all linked lights. Long press for 5 seconds to activate an audible indicator sound.
  • Zone(1-4) OFF: [Zone OFF Button] - Touch to turn off zone-linked lights.
  • 4x(un) Link Light: [Link/Unlink Button] - Used for linking and unlinking lights to specific zones or the master controller.

Link/Unlink Procedure:

Link: First, power off the device. Then, power it on. Within 3 seconds, touch any of the Zone ' | ' buttons 3 times shortly. The link is confirmed when the light blinks 3 times with green color. If not, try again.

Unlink: First, power off the device. Then, power it on. Within 3 seconds, touch the linked Zone ' | ' button or the Master ' | ' button 5 times shortly. The unlink is confirmed when the light blinks 10 times with red color. If not, try again.

PDF preview unavailable. Download the PDF instead.

T4 EN Adobe PDF library 10.01 Adobe Illustrator CC 2015 (Windows)

Related Documents

Preview MiLight Panel Remote Controller T/B Series User Manual
User manual for MiLight Panel Remote Controllers, T and B series, detailing features, parameters, installation, and operation for dimming, CCT, RGB, and RGB+CCT lighting.
Preview MiLight Plugin for HomeSeer HS4: Installation, Configuration, and Usage Guide
Comprehensive guide to installing, configuring, and using the MiLight Plugin for HomeSeer HS4, enabling local control of MiLight LED lights and Wi-Fi controllers. Covers setup, noteworthy features, presets, macros, configuration modification, and troubleshooting.
Preview Mi-Light FUT092 4-Zone RGB+CCT Remote Controller User Instruction
User instructions for the Mi-Light FUT092 4-Zone RGB+CCT Remote Controller, detailing features, parameters, operation, and linking/unlinking procedures.
Preview Mi-Light RGBW Remote Control Manual (FUT095/FUT096)
Comprehensive guide to the Mi-Light RGBW Remote Controls, models FUT095 and FUT096, detailing features, parameters, key diagrams, and linking/unlinking instructions for smart lighting control.
Preview Mi-Light FUT037 RGB and FUT038 RGBW LED Strip Controllers - Technical Specifications and Features
Detailed information on Mi-Light FUT037 RGB and FUT038 RGBW LED strip controllers, including product features, technical parameters, mode lists, connection diagrams, and compatible remotes. Learn about color selection, remote control, smartphone app control, and voice control capabilities.
Preview User Instruction: Mi-Light 2.4G Touch Screen RGB LED Control System (FUT025)
Comprehensive user manual for the Mi-Light FUT025 2.4G Touch Screen RGB LED Control System, detailing product description, technical specifications, functions, programming, and connection instructions.
Preview Mi-Light PLCW1 PLC Lighting Master: WiFi & 2.4G Smart Control Guide
Comprehensive guide to the Mi-Light PLCW1 PLC Lighting Master, covering features, technical specifications, setup, remote compatibility, app control (Tuya Smart), and voice assistant integration (Alexa, Google Home).
Preview Mi-Light MiBoxer 2.4G Rainbow Remote (RGB+CCT) S2 Series User Guide
User guide for the Mi-Light MiBoxer 2.4G Rainbow Remote (RGB+CCT) S2 series, detailing product features, parameters, button functions, and linking/unlinking instructions.