MiLight Panel Remote Controller T/B Series

Model No.: T1/T2/T3/T4 & B1/B2/B3/B4

Features

The MiLight Panel Remote Controller features a delicate and fashionable tempered glass panel with a high-precision capacitive touch screen IC for stable operation. It utilizes 2.4GHz high RF wireless control, offering long-distance control, low power consumption, and high-speed transmission rates.

The product is available in T series (AC powered) and B series (battery powered), each with four models:

T1/B1: 4-zone dimmable panel remote controller
T2/B2: CCT 4-zone panel remote controller
T3/B3: 4-zone RGB/RGBW panel remote controller
T4/B4: 4-zone RGB+CCT panel remote controller

These controllers are compatible with MiLight smart LED lighting, LED controllers, and smart panel controllers.

Parameters

B Series

Power Supply: 3V (2*AAA Battery)
Working Voltage: 3V (2*AAA Battery)
Transmitting Power: 6dBm
Standby Power: 20uA
Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Control Distance: 30m
Working Temp.: -20°C to 60°C
Size: 86mm x 86mm x 19mm

T Series

Power Supply: AC90-110V or AC180-240V
Working Voltage: AC90-110V or AC180-240V
Transmitting Power: 6dBm
Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Control Distance: 30m
Working Temp.: -20°C to 60°C
Size: 86mm x 86mm x 31mm

Compatible Models

Panel Remote Controller Name	Compatible Remote Model	Compatible Products
4-Zone Brightness Dimming	FUT091	Brightness dimming series
4-Zone CCT Adjust	FUT091	CCT adjust series
4-Zone RGB/RGBW	FUT095/FUT096	RGB / RGBW series
4-Zone RGB+CCT	FUT092	RGB+CCT series

Installation and Dismantlement

B Series Installation/Dismantlement

Installation:

Install the bottom case into the wall.
Fix the controller base on the bottom case with a screw.
Clicks the glass panel onto the controller base by aligning the upper side first, then pressing the lower side gently until it clicks into place.

Dismantling:

Insert a screwdriver into the lower bayonet and gently pry upwards to detach the controller.

T Series Installation/Dismantlement

Installation:

Install the bottom case into the wall using standard mounting boxes.
Fix the controller base onto the bottom case with screws.
Attach the glass panel by clicking the upper side into the controller base first, then pressing the lower side until it clicks securely.

Dismantling:

Use a screwdriver to insert into the lower bayonet and lever upwards to release the controller.

Function of Keys

B1 & T1 (4-Zone Brightness Dimming)

Dimming Slider: Touch to adjust brightness from 1% to 100%.
ALL ON: Touch to turn on all linked lights. Long press for 5 seconds to enable the indicating sound.
ON (Zone): Touch to turn on zone-linked lights.
60S Delay OFF: When lights are ON, press this to turn them OFF automatically after 60 seconds.
ALL OFF: Touch to turn off all linked lights. Long press for 5 seconds to disable the indicating sound.
OFF (Zone): Touch to turn off zone-linked lights.

B2 & T2 (4-Zone CCT Adjust)

CCT Slider: Touch to change color temperature.
Dimming Slider: Touch to adjust brightness from 1% to 100%.
ALL ON: Touch to turn on all linked lights. Long press for 5 seconds to enable the indicating sound.
ON (Zone): Touch to turn on zone-linked lights.
60S Delay OFF: When lights are ON, press this to turn them OFF automatically after 60 seconds.
ALL OFF: Touch to turn off all linked lights. Long press for 5 seconds to disable the indicating sound.
OFF (Zone): Touch to turn off zone-linked lights.

B3 & T3 (4-Zone RGBW)

Color Slider: Touch to select desired colors.
Dimming Slider: Touch to adjust brightness from 1% to 100%.
White Button: Touch to switch to white light mode.
Mode: Switches between dynamic modes.
Speed+/-: Adjusts the speed of the current dynamic mode.
ALL ON: Turns on all linked lights. Long press for 5 seconds to enable indicating sound.
ON (Zone): Turns on zone-linked lights.
ALL OFF: Turns off all linked lights. Long press for 5 seconds to disable indicating sound.
OFF (Zone): Turns off zone-linked lights.

B4 & T4 (4-Zone RGB+CCT)

Color Slider: Touch to select desired colors.
Dimming Slider: Touch to adjust brightness from 1% to 100%.
CCT Slider/Saturation: Adjusts color temperature in white light mode or color saturation in color mode.
White Button: Touch to switch to white light mode.
Mode: Switches between dynamic modes.
Speed+/-: Adjusts the speed of the current dynamic mode.
ALL ON: Turns on all linked lights. Long press for 5 seconds to enable indicating sound.
ON (Zone): Turns on zone-linked lights.
ALL OFF: Turns off all linked lights. Long press for 5 seconds to disable indicating sound.
OFF (Zone): Turns off zone-linked lights.

Link/Unlink Instructions

Link/Unlink (B1&T1, B2&T2, B4&T4)

Linking Instructions:

Switch off the light, wait for 10 seconds, then switch it on again.
When the light is on, short press any zone's 'ON' button (represented by a power symbol) 3 times within 3 seconds.
The light blinking 3 times slowly indicates successful linking. If it does not blink slowly, repeat the process.

Unlinking Instructions:

Switch off the light, wait for 10 seconds, then switch it on again.
When the light is on, long press the 'ON' button (represented by a power symbol) within 3 seconds.
The light blinking 10 times quickly indicates successful unlinking. If it does not blink quickly, repeat the process.

Link/Unlink (B3&T3)