Instruction Manual

1. Setting of Time

Before using the timer, the present time must be set.

1. Press “CLOCK” and “HOUR” simultaneously to set the hour.
2. Press “CLOCK” and “MIN” simultaneously to set the minute.
3. Press “CLOCK” and “WEEK” simultaneously to set the day of the week.

2. Setting of Timer Program

1. Press “PROG” to enter the setting mode. The display will show “1ON”.
2. Press “HOUR”, “MIN”, and “WEEK” to set the hour, minute, and day of the week for the timer's ON time.
3. Press “PROG” again to set the OFF time. The display will show “1OFF”.
4. Repeat step 2.2 to adjust the hour, minute, and week.
5. Press “PROG” again to enter the second ON/OFF mode.
6. Repeat steps 2.1 to 2.4 for setting the timer's ON/OFF times.

There are a total of eight groups of timer settings. During time setting mode, press “R” to cancel the current setting. Press “R” again to return to the previously set time.

3. Combination Weekly Setting

1. During the timer ON/OFF setting mode, press “WEEK” once. The display will show Mo., Tu., We., Th., Fr., Sa., Su. This indicates a daily ON/OFF setting.
2. Press “WEEK” again. The week day will show, allowing you to set the required week day. In this setting, the timer will only operate on the selected week day.
3. After the display shows Su, the next press will show Mo, Tu, We, Th, Fr. The timer will then provide settings only for the working days of the week.
4. Press “WEEK” again. The display will show Sa, Su. This means the timer will operate only on the weekend and Sunday.
5. Press “WEEK” again. The display will show the whole week except Sunday. This means the timer will operate on weekdays, excluding Sunday.
6. Press “WEEK” again. The display will show Mo, We, Fr. The timer will operate on these 3 days.
7. Press “WEEK” again. The display will show Tu, Th, Sa. The timer will operate on these 3 days.
8. Press “WEEK” again. The display will show Mo, Tu, We. The timer will operate on these 3 days.
9. Press “WEEK” again. The display will show Th, Fr, Sa. The timer will operate on these 3 days.
10. Press “WEEK” again. There will be no week day showing. The timer will not operate on any days.

Press “R” to cancel the setting of week days. Press it again to return to the previous week day.

4. Timer ON/OFF Turn On or Turn Off Mode

1. Press the [mode indicator] button. The display will show “ON”, “AUTO”, or “OFF” status.
2. Press the indicator to “ON”. The timer will provide a permanent switch-on output.
3. Press the indicator to “AUTO”. The timer will be switched on and switched off during the set times.
4. Press the indicator to “OFF”. The timer is turned off.

5. Special Functions

1. Press “WEEK” and “HOUR” simultaneously. The display will show “O” on the right-hand side. This means the ON timing and OFF timing will be extended randomly from 2 minutes to 32 minutes.

6. Notes

Output loading should not exceed capacity: 230V, 16A, 3500W.

Before use, it is recommended to plug the unit into a power source for a few hours to charge the internal battery.

• The tolerance of the timer is 2 minutes per month.
• Summer time can be added to the timer (optional, please contact your dealer).
• If there is no display on the LCD, please recharge the timer before using.