Important Safety Information
For indoor use only.
IMPORTANT: Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Parts Included
- 3x Shades/Globes
- 3x Mounting Rings/Washers
- 3x Smaller Washers/Cups
Assembly Instructions
Step 1: Assemble Main Structure
The diagram shows the main arm structure of the lamp. An information icon (ⓘ) is present. A diagram illustrating an incorrect assembly method is shown, indicated by crossed arms.
Step 2: Connect Arm Segments
The diagram illustrates connecting the articulated arm segments of the lamp, showing a rotational movement to secure them.
Step 3: Attach Mounting Rings
Diagram shows attaching mounting rings (3x) to the ends of the lamp arms, with arrows indicating the direction of attachment.
Step 4: Insert Light Bulbs
Diagram shows inserting three light bulbs into the lamp sockets. The quantity '3x' is indicated.
Step 5: Attach Shades/Globes
The diagram shows attaching the shades or globes to the lamp arms, with arrows indicating a screwing motion for attachment.
Step 6: Attach Main Body to Canopy
Diagram shows connecting the main body of the lamp to the ceiling canopy, with arrows indicating insertion and a rotational lock.
Step 7: Prepare Wiring
Diagram shows preparing the electrical wires for connection.
Step 8: Connect Wires to Terminal Block
Diagram shows connecting the wires to a terminal block. The terminal block has clearly marked 'L' (Live) and 'N' (Neutral) terminals. The diagram shows wires being inserted into the appropriate terminals.
Step 9: Secure Ceiling Canopy
Diagram shows securing the ceiling canopy to the ceiling. An information icon (ⓘ) is present. A measurement of 20-35 mm (3/4" - 1 3/8") is indicated, likely for cable management or clearance.
Step 10: Prepare Wires
Diagram shows preparing the electrical wires by stripping insulation. A measurement of 20 mm (3/4") is indicated for the stripped wire length.
Step 11: Connect Power Cable
Diagram shows connecting the main power cable to the terminal block. The diagram indicates connecting the Live (L) and Neutral (N) wires to the corresponding terminals. The quantity '2x' is shown, likely referring to the two main conductors being inserted.
Step 12: Close Terminal Block Cover
Diagram shows closing the terminal block cover. The text "Click!" indicates a secure closure.
Step 13: Route Wires
Diagram shows routing the electrical wires neatly within the ceiling canopy.
Step 14: Attach Main Body
Diagram shows attaching the main body of the lamp to the ceiling canopy, with a rotational locking mechanism.
Step 15: Final Shade Attachment
Diagram shows the final attachment or tightening of the lamp shades/globes to the arms, with arrows indicating a rotational securing motion.
