Yeelight Ambient Lamp User Manual and Specifications
Product Overview
This document provides details for the Yeelight Ambient Lamp, a portable and smart lighting device. The lamp features a sleek design and is powered by a rechargeable battery.
Key Components and Dimensions:
- Lamp Body: Consists of a lampshade and a base.
- Dimensions: The lamp body has a diameter of approximately 80mm (±0.5mm) and a height of 400mm (±0.5mm).
- Charging Port: Located on the lamp base.
- Accessories: Includes a charging cable.
The product is identified by SKU YL017 and model number YLFW01YL.
Usage Instructions
Powering On/Off:
- To turn the lamp on, place the switch in the "ON" position.
- To turn the lamp off, place the switch in the "OFF" position.
Brightness Adjustment:
- When the lamp is turned on, it defaults to 100% brightness.
- Rotate the lampshade to adjust the brightness level from 1% to 100%. Rotation in one direction increases brightness, and in the other decreases it.
Grouping Multiple Lamps: For advanced settings, including grouping multiple lamps, refer to the Yeelight app.
Factory Reset
The reset button is located at the base of the lamp. To perform a factory reset:
- Press the button using a sharp object.
- Hold the button for 5 seconds until the lamp begins a breathing light pattern.
- The lamp will breathe for approximately 5 seconds and then turn off, indicating a successful reset.
Smart Controls
To connect the Yeelight Ambient Lamp to your smart devices:
- Ensure Bluetooth is enabled on your mobile device.
- Download the "Yeelight" app from your device's app market.
- Ensure the lamp's switch is in the "ON" position.
- Open the Yeelight app and follow the on-screen instructions to add and control the lamp.
Features
- Adjustable brightness (1%-100%).
- Bluetooth connectivity for smart control.
- Supports custom scenes and grouping via the app.
- Sleek and modern design.
- Portable for easy placement.
Specifications
| Parameter | Details |
|---|---|
| Brightness Adjustment | 1% - 100% |
| Rated Power | 6.5W |
| Input Voltage | DC 5V / 1.3A |
| Working Humidity | 0% - 85% RH |
| Working Temperature | -10°C to 40°C (14°F to 104°F) |
| Bluetooth Version | 4.2 |
| Battery | Li-polymer, 3.7V, 2100mAh |
| System Requirements | Android 4.4 / iOS 8.0 or later |
| Standard | Q/QDYLK0001-2016 |
Safety Precautions
- Warning: Read this manual carefully before use.
- Do not immerse the product in water or use it outside specified temperature/humidity ranges.
- For indoor use only.
- Use only standard AC adaptors. Misuse may damage the product and cause safety hazards.
- Keep the product away from liquids and humid environments.
- The LED module cannot be replaced. Do not disassemble the product.
- The light-emitting diode may cause eye damage if disassembled.
- The lamp generates heat during operation; ensure adequate airflow around it.
- Using improper voltage may damage the product.
Troubleshooting
- Lamp doesn't turn on: Ensure the battery is charged and the switch is in the "ON" position. Check the charging cable and adaptor.
- Brightness adjustment doesn't work: Perform a factory reset. If the issue persists, contact support.
- Phone can't connect to the lamp: Ensure Bluetooth is enabled on your phone, the lamp is within range, and the Yeelight app is updated. Try restarting both devices and the app.
- Can't charge the lamp: Verify the charging cable and adaptor are functional and compatible. Ensure the charging port is clean.
Manufacturer Information & Compliance
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. (An ecosystem company of Xiaomi)
Address: 10-84 Qingdao Innovation Park B, Qingdao, China
Customer Support: Call 400-619-7969 or visit yeelight.com.
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits. The device can be used in portable exposure condition without restriction.
Packaging Diagram Description
The packaging diagram illustrates the layout and dimensions of the product packaging. It indicates:
- Front View: Shows the main product image and branding, with dimensions noted.
- Back View: Typically contains product information, warnings, and compliance details.
- Side View: May show product dimensions or specific features.
All dimensions are provided in millimeters (mm) and are indicated at a 1:1 scale.
Material and Craftsmanship Requirements (from Chinese text):
- Material: 128g matte copper paper.
- Process: Printing, inline coating, die-cutting, folding.
- Color Requirements: Accurate color reproduction, firm printing, color registration tolerance ≤0.1mm, folding tolerance ≤±0.5mm.
- Color Specification: Pantone 185C + Cool Gray 11C.
- Environmental Requirements: All materials must comply with RoHS environmental standards.
