Manuals+

MAULexplore 820 56 LED Desk Lamp

Product Overview

This document provides assembly and service instructions for the MAULexplore 820 56 LED desk lamp.

Brand: MAUL

Model: MAULexplore 820 56

Article Numbers:

  • Lamp Unit: 8205609.160
  • LED Module: 8205609.200
  • Power Supply/Driver: 8205609.210

Features: Dimmable LED lighting, adjustable arm, clamp base.

User Guidance: Contains safety information for users working with the device. [user-safety-icon]

Assembly and Disassembly Steps

  1. Step 1: Accessing the Lamp Head

    Description: Remove the outer casing of the lamp head to access internal components. This involves unscrewing multiple screws.

    Tools required: PH1 screwdriver.

    Visual: Image shows the lamp head with several screws circled, indicating points of removal.

  2. Step 2: Removing the LED Module

    Description: With the casing open, the LED module is visible. Unscrew the fasteners securing the LED module.

    Tools required: PH1 screwdriver.

    Visual: Image shows the lamp head interior with the LED module exposed and screws securing it circled.

  3. Step 3: Disconnecting Internal Wiring

    Description: Disconnect internal wiring connections to the circuit board and LED module. Unscrew components holding the circuit board.

    Tools required: PH1 screwdriver.

    Visual: Image shows internal wiring and circuit board, with screws circled for removal.

  4. Step 4: Rotating a Component

    Description: Rotate a specific component as indicated by the arrow.

    Action: Rotate.

    Visual: Image shows a circuit board with a red arrow pointing to a component, with the text "DREHEN ROTATE".

  5. Step 5: Pulling a Connection

    Description: Pull a specific wire connection to disconnect it.

    Action: Pull.

    Tools required: PH0 screwdriver (for leverage or support).

    Visual: Image shows a circuit board with a red arrow pointing to a wire connector, with the text "ZIEHEN PULL". A component is circled.

  6. Step 6: Connecting Wires (Reassembly)

    Description: Connect wires to the circuit board during reassembly. This involves pushing connectors into place.

    Actions: Push connector (a), Pull connector (b).

    Tools required: PH1 screwdriver.

    Visual: Image shows a circuit board with wires being connected. Text indicates "DRÜCKEN PUSH a)" and "ZIEHEN PULL b)".

General Information

The MAULexplore 820 56 is designed for efficient and adjustable task lighting.

Ensure all electrical connections are secure and properly insulated before powering the device.

Refer to the specific article numbers for replacement parts.

Models: 8205609.200, 8205609.210, 8205609.200 LED Workplace Light, LED Workplace Light, Workplace Light, Light

PDF preview unavailable. Download the PDF instead.

8205609.160-sw GPL Ghostscript 9.19

Related Documents

Preview MAULcraft 820 53 LED Desk Lamp: Assembly and Disassembly Guide
Detailed instructions for assembling and disassembling the MAULcraft 820 53 dimmable LED desk lamp, including component identification and step-by-step procedures.
Preview MAULabby 820 07 LED Desk Lamp: Removal and Assembly Guide
Comprehensive guide for the MAULabby 820 07 LED desk lamp, detailing removal and assembly procedures. Includes product identification, part numbers, and step-by-step instructions with textual descriptions of visual aids.
Preview MAULexplore 820 56 LED Workplace Lamp - User Manual and Safety Guide
Comprehensive guide for the MAULexplore 820 56 LED desk lamp, covering intended use, safety instructions, technical specifications, and disposal information.
Preview MAULpirro 820 26 LED Desk Lamp Assembly and Component Guide
Comprehensive guide for the MAULpirro 820 26 LED desk lamp, detailing its components, assembly steps, and disassembly procedures. Includes article numbers and technical descriptions.
Preview MAULrubia 820 15 LED Desk Lamp Assembly and Repair Guide
Detailed instructions and component information for the MAULrubia 820 15 LED desk lamp, including assembly steps, part numbers, and technical specifications.
Preview MAULcraft duo 820 54 LED Magnifying Lamp Service Guide
Step-by-step instructions for servicing the MAULcraft duo 820 54 LED magnifying lamp, detailing the removal and replacement of LED modules and associated electronic components. Includes part numbers and required tools.
Preview MAULiris 826 12 LED Magnifying Lamp - Removal and Assembly Instructions
Detailed instructions for the removal and assembly of the MAULiris 826 12 LED magnifying lamp, including component identification, safety warnings, and step-by-step procedures with screwdriver types.
Preview MAULarc LED Desk Lamp Service and Repair Guide
Detailed instructions for servicing and repairing the MAULarc LED desk lamp, including component replacement for the LED module and power supply unit.