Fanttik B10 Pro Max

1. Safety Warnings

• Avoid moisture, dust, and drops.
• Do not store the product in extreme temperature environments.
• Stay alert, watch what you are doing and use common sense when operating. Do not operate while you are tired or under the influence of drugs, alcohol, or medication.
• This product is not a toy and should not be used by kids under 7 years old.
• This product has a built-in battery; do not throw it into fire and should be recycled by local laws and regulations.
• Do not dismantle the machine by yourself. Have your power tool serviced by a qualified repair person or contact Fanttik for advice.
• Do not use with wet hands.
• Do not place this product in a splashing or soaking environment.
• Do not insert foreign objects into the air outlet and air inlet.
• Do not place this product near a heat source (stove or heater, etc.) or in a car on a hot day.
• Do not use it near LPG or other flammables (such as volatile agents, paint thinners, sprays, etc.), otherwise it may cause an explosion or fire.
• Do not block the air inlet and air outlet when the product is working.
• If the product has abnormal noise, odor, high temperature, or abnormal fan blade rotation, please stop using it immediately.
• Do not disassemble the entire product. If it is accidentally disassembled and causes abnormal operation, please contact after-sales service to send it back.
• Do not blow the air flow to the eyes, ears, mouth, and other human organs during use.
• Do not store this product where children and pets can reach it.
• Do not use this product in an environment where the temperature is too high or too low.
• Regularly remove attachments from the air outlet and air inlet.
• Do not press or rub the air outlet and air inlet with your fingernails or sharp objects.
• Do not overcharge or over-discharge the battery, otherwise it will damage the battery.
• Do not use alcohol, nail polish remover, or detergent to clean this product, otherwise it may cause malfunction, cracking, or fading.
• Do not use this product near a bathtub, shower, washbasin, or other utensils filled with water.

2. Package Contents

• B10 Pro Max Air Duster x 1 [Illustration: Main unit of the air duster]
• Short blow nozzle x 1 [Illustration: Short, conical nozzle]
• Swimming ring blow nozzle x 1 [Illustration: Nozzle with a wider, flatter opening]
• Long blow nozzle x 1 [Illustration: Long, slender nozzle]
• Air bed blow nozzle x 1 [Illustration: Nozzle with a wider, flatter opening, possibly for inflating]
• USB-C Charging Cable x 1 [Illustration: USB-A to USB-C cable]
• Storage bag x 1 [Illustration: Drawstring fabric bag]
• User Manual x 1 [Illustration: Booklet labeled "User Manual"]

3. Product Overview

The Fanttik B10 Pro Max Electric Air Duster features the following components:

• 1. Air outlet/Connection Port: Where the air is expelled or nozzles are attached.
• 2. Light bulb beads: Integrated LED lighting.
• 3. Boost Button: Activates a higher power mode.
• 4. Air inlet: Where air is drawn into the device.
• 5. LED display screen: Shows gear level, battery status, etc.
• 6. Wind speed plus key: Increases the fan speed.
• 7. Wind speed reduction key: Decreases the fan speed.
• 8. On and off key: Powers the device on and off.
• 9. USB Type-C Charging Port: For charging the device.

4. How to Use

Power On/Off

• Power On: Press and hold the power button for 2 seconds to turn on the device.
• Power Off: Press and hold the power button for 2 seconds to shut down the device.

Note: For your safety, the device cannot be turned on while charging.

Turn On/Off the LED Light

• The LED light turns on simultaneously when the motor is on.

Display

• Power on: After powering on, the screen displays "1" gear. After 5 seconds, it changes to show the battery level indicator.
• When the gear adjustment button is pressed, the screen shows the current gear level (1-5).
• When the Boost Button is held down, the screen displays "6". It reverts to showing the current gear level after the Boost Button is released.

Charging

• When charging, the charging icon blinks and displays the battery level ranging from 10% to 99%.
• When the battery is charging, the indicator will slowly blink white.
• When the battery is fully charged, the indicator will become solid white.

Discharging

• When discharging, the charging icon remains lit and displays the battery level ranging from 10% to 99%.

Use Nozzles

• Other Nozzles: Insert other nozzles into the connection port of the nozzle, then rotate to align the position marks on both nozzles for complete engagement.
• This device is equipped with a universal USB Type-C charging port and comes with a USB charging cable. A charger is not included; please use a 5V charger for charging.

5. Specifications

*Tested by pitot tube anemometer with air duster fully charged, extension nozzle installed and level set on level II.

Contact & Certifications

For support or inquiries, please contact:

• Phone: 929-693-6066 (MON-FRI 9AM-5PM [ET])
• Website: www.fanttik.com
• Email: support@fanttik.com

Manufacturer/Distributor: METASEE LLC

Address: 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203

Made in China

Certifications and Compliance:

• RoHS (Restriction of Hazardous Substances)
• CE (Conformité Européenne)
• FCC (Federal Communications Commission)
• BC (Battery Charger Certification)
• Recycling Symbol [Recycling symbol description]
• WEEE Symbol (Waste Electrical and Electronic Equipment) [WEEE symbol description]