Xiaomi Watch S4 User Manual
Product Overview
Read this manual carefully before using this product, and retain it for future reference.
Watch Components:
- Display Screen
- Contact Points
- Microphone
- Barometer
- Balance Hole
- Heart Rate Sensor
- Microphone
- Rotating Crown
- Speaker
- Power Button
Charging Dock: A diagram shows the charging dock with its cable and connector.
Download and install the app to better manage your watch, and log in to your Xiaomi account for more services.
Scan the QR code to download the corresponding app based on your phone's system. [QR code for app download]
For more details, please scan the QR code or connect the watch to the app and check it in the user guide. [QR code for more details]
Bezel Installation and Removal Guide
- Place your index finger and thumb on the side edges of the bezel at the 6 o'clock and 12 o'clock positions respectively, or press your palm flat against the bezel. Rotate counterclockwise with force at an angle (approximately 20 degrees) until it can no longer move.
- Pinch the bezel vertically upward with both fingers to remove the bezel component.
- Take the replacement bezel component and align the solid alignment point on the inside of the bezel with the hollow alignment point at the 12 o'clock position on the watch body. Place it horizontally onto the watch body until it clicks into place.
- Place your index finger and thumb on the side edges of the bezel at the 6 o'clock and 12 o'clock positions respectively, or press your palm flat against the bezel. Rotate clockwise with force until you hear a 'click' sound, indicating that the bezel is securely installed.
Diagrams illustrate two options for bezel installation and show alignment points (solid and hollow).
Specifications
Name | Smart Watch |
Model | M2425W1 |
Water Resistance | 5ATM |
Battery Capacity | 486 mAh |
Operating Temperature | -10°C to 45°C |
Wireless Connectivity | Bluetooth® 5.3 |
Input Voltage | 5 V [DC voltage symbol] |
Input Current | 2 A |
GPS-L1/Galileo-E1/GLONASS-G1/BDS-B1I B1C/QZSS-L1 Operation Frequency | 1559-1610 MHz |
GPS-L5/Galileo-E5a/BDS-B2A/QZSS-L5 Operation Frequency | 1164-1215 MHz |
Bluetooth Operation Frequency | 2400-2483.5 MHz |
Bluetooth Maximum Output (EIRP) | < 14 dBm |
Maximum Output Power | -20.1dBuA/m@10m |
NFC Operation Frequency | 13.56 MHz |
Compatibility: This product only supports certain Android or iOS systems. For detailed information, please check the product page on www.mi.com.
For regulatory information, product certification, and compliance logos related to this product, please go to Settings > About > Regulatory.
[Bluetooth logo] The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.
Regulatory Compliance Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. [WEEE symbol]
EU Declaration of Conformity
[CE mark] CE mark is applicable to product and built-in battery. Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type M2425W1 is in compliance with Directive 2014/53/EU and Regulation (EU) 2023/1542. The full text of the EU declaration of conformity is available at the following internet address: https://www.mi.com/global/service/support/declaration.html
This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits depend on whether this equipment is used against the head or on the wrist. The SAR limit is 2.0 watts per kilogram averaged over 10 grams of tissue for use against the head and 4.0 watts per kilogram averaged over 10 grams of tissue for use on the wrist.
During testing, this equipment radios are set to their highest transmission levels and placed in positions that simulate use next to the mouth, with 5 mm separation, and on the wrist, with no separation. When placing this equipment near your mouth, keep at least 5 mm of separation to ensure exposure levels remain at or below the as-tested levels. After testing, the highest SAR values are as follows: Next to the mouth: 0.132 W/kg Limbs: 0.232 W/kg
Safety Precautions
- For daily use, comfortably tighten the watch around your wrist about one-finger width away from your wrist bone. Adjust the strap to ensure the heart rate sensor can collect data normally.
- When using the watch to measure your heart rate, please hold your wrist still.
- The smart watch has a water resistance rating of 5ATM (equivalent to 50 meters in depth). It can be worn while swimming in pools, near the shore, or during other shallow-water activities. However, it should not be used in hot showers, saunas, or diving. Additionally, avoid exposing the smart watch to direct impact from swift currents during water sports. After use in seawater, rinse the smart watch gently with fresh water. Leather, metal, or woven straps should be dried immediately after exposure to water (avoid direct sunlight or high heat). Note that water resistance is not permanent and may decline over time. For detailed product water resistance information, please refer to the official Xiaomi website's smart watch and smart band water resistance guidelines.
- The touchscreen of the watch does not support underwater operations. When the watch comes into contact with water, use a soft cloth to wipe away excess water from its surface before use.
- During daily use, avoid wearing the watch too tightly. Keep its contact area dry and regularly clean the strap with water. Immediately stop using the watch and seek medical assistance if the contact area on your skin shows signs of redness or swelling.
- Make sure the power adapter, the charging cable, and the watch are in a dry environment while charging. Do not touch them with wet hands and do not expose them to rain or other liquids.
- If the watch will not be used for an extended period, turn it off after fully charging and then store it in a cool and dry place. Recharge the watch at least once every 3 months.
- The operating temperature of the watch is -10°C to 45°C. If the ambient temperature is too high or too low, the watch may malfunction.
- If the screen is broken, do not touch or try to remove it. Instead, you should stop using the watch immediately and contact an authorized service provider.
- Please use the included charging dock to charge the watch. Only use the power adapters that comply with the local safety standards or certified and supplied by qualified manufacturers.
- Do not disassemble, strike, crush or throw the watch into a fire. Stop using the battery immediately if there is any swelling or fluid leakage.
- The watch has a built-in battery. To avoid damage to the battery or the watch, do not disassemble and replace the battery by yourself. Only the authorized service providers can replace the battery; otherwise, it will cause potential dangers even personal injuries if a wrong type of battery is used.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Do not dispose of the battery in household waste or landfills. Please follow local laws and regulations when disposing of this product and its used batteries.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- The watch and its accessories may contain small parts. To avoid choking or other hazards or damages caused by the children, keep the watch out of the reach of children.
- Keep the product's indicator away from the eyes of children and animals while the product is in use.
- This watch is not a medical device, any data or information provided by the watch should not be used as a basis for diagnosis, treatment, and prevention of diseases.
- To prevent possible hearing damage, do not listen at high volume levels for long periods. [hearing damage symbol]
- The product information is listed on the back case of the watch for your reference.
Warranty Notice
As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website https://www.mi.com/global/support/warranty.
Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user's negligence or fault are not warranted. The contact person for the after-sale service may be any person in Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.
The present warranties do not apply in Hong Kong and Taiwan.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi's official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
Disclaimer: The illustrations of the product, accessories, user interfaces, and other elements in this User Manual are schematic diagrams for reference only, and they may be slightly different from the actual product. This manual is published by Xiaomi or an enterprise in Xiaomi's ecosystem. Typographical errors and inaccurate information in this manual or the related programs and/or equipment may change without prior notice. Such changes will be indicated in the latest version of the manual.
Manufacturer: Xiaomi Communications Co., Ltd.
Contact Information
Manufacturer Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085
For further information, please go to www.mi.com.
Manufacturer's Authorized EU Representative:
- Name: Xiaomi Technology Netherlands B.V
- Address: Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands
- Email: contact@support.mi.com
Importer:
- Beryko s.r.o.
- Address: Pod Vinicemi 931/2, 301 00 Plzeň
- Website: www.beryko.cz