Device Overview
This section describes the physical components of the Blackview WAVE 8 Series smartphone.
Front View
The front of the device features:
- Receiver: Located at the top, used for audio during calls.
- Front Camera: Positioned at the top, for selfies and video calls.
- Screen: The main display area.
At the bottom edge, you will find:
- Headphone Jack: For connecting wired headphones.
- Microphone: Captures audio for calls and recordings.
- Speaker: Outputs audio.
- Charger/Type-C Port: For charging the device and data transfer.
Side and Back View
The sides and back of the device include:
- Side 1: Volume Up (+) and Volume Down (-) buttons.
- Back: Features the Camera module, which includes a Flashlight.
- Side 2: Power Key, which also functions as the Fingerprint Scanner.
- TF/SIM Card: Slot for memory cards and SIM cards.
Getting Started
1. How to Insert the Card
To ensure your smartphone can make calls, insert the SIM card as follows:
- Press the card pin into the side hole to eject the card tray. Pull out the tray.
- Place the Nano SIM card or Nano SIM card and TF card into the card slot with the metal side facing down.
- Align the bevel angle of the card with the bevel angle of the card slot and place it in the corresponding slot.
- Insert the card holder back into the phone following the direction of the arrow.
Diagrammatic representation of card placement:
[Diagram showing SIM 1, SIM 2, and TF Card slots and their orientation for insertion]
2. How to Boot
For devices with a non-removable battery, press the power button for 3-5 seconds to boot the device.
3. How to Send SMS, MMS
SMS
- Open the SMS app.
- Select 'New Information'.
- Enter a phone number or browse your contacts.
- Select 'Edit Information' and enter your text.
- Press the send icon [▶️].
MMS - Video
- When writing a text message, select images, videos, or other files you wish to add.
- You can also take a new picture or video directly.
- Proceed with selecting or sending [▶️].
4. Language Switching Settings
- Navigate to Main Menu > Settings > System > Language and input method.
- Select 'Language and input method' > 'Language' > 'Language adding'.
- Choose your desired language. The system will automatically switch to the selected language interface.
- To set it as primary, select the language icon after the language bar and drag it to the first position [⚙️].
5. SAR (Specific Absorption Rate)
The maximum electromagnetic radiation absorption ratio (SAR) for this product is ≤2.0W/kg.
This complies with the requirements of the national standard GB 21288-2007.
Safety and Compliance
EU Declaration of Conformity
Shenzhen DOKE Electronic Co., Ltd. declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product is authorized for use in all EU member states.
A complete declaration of conformity can be obtained at: www.XXXXXXX.com
CE Marking: CE
The device is restricted to indoor use only when operating in the 5150 to 5250MHz frequency range.
RF Exposure Statement
SAR tests were conducted according to CE standards with the device transmitting at its highest certified power level. While SAR is determined at the highest certified power level, the actual SAR level during operation can be below the maximum value.
This product has been tested and meets CE RF exposure guidelines with test distances of 0mm for head & limbs and 5mm for body worn. The maximum SAR values reported are 0.687W/kg for head, 1.297W/kg for body worn, and 1.913W/kg for limbs.
The use of belt clips, holsters, and similar accessories should not involve metallic components. Accessories not meeting these requirements may not comply with CE exposure regulations and should be avoided.
Warnings
- [Warning Symbol ⚠️]: Risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to instructions.
- [Warning Symbol ⚠️]: Use earphones with caution, as excessive sound pressure can cause hearing loss.
- [Warning Symbol ⚠️]: The adapter should be installed near the equipment and be easily accessible.
- [Warning Symbol ⚠️]: To charge the device, use the provided charger or a CE-approved charger with the specified output parameters. Unauthorized adapters or data cables may cause damage or explosion.
- Adapter Information:
- Model: QZ-01004EA00
- Input: 100-240V~ 50/60Hz 0.3A
- Output: 5.0V-2.0A (10.0W)
- [Warning Symbol ⚠️]: Plug the adapter into a 100-240VAC socket. Using other types may cause damage or explosion. The plug acts as the disconnect device for the adapter.
- [Warning Symbol ⚠️]: Do not store the device in temperatures below -20°C or above 60°C.
- [Warning Symbol ⚠️]: The safe operating temperature for this device is 0°C-25°C.
Technical Specifications
Frequency Range
- GSM: 850 / 900 / 1800 / 1900 MHz
- UTRA FDD: Band I/VIII
- E-UTRA FDD: Band 1/3/7/8/20
- E-UTRA TDD: Band 38/40
- 2.4G WiFi: 2412 ~ 2472 MHz
- 5G WiFi: 5180 - 5240 MHz
- Non-SRD: 5745~5825MHz
- Bluetooth: 2402 ~ 2480 MHz
- GNSS: 1575.42 MHz (Rx)
- FM: 87.5~108 MHz (Rx)
Transmit Power
- GSM900: 32±1.5dBm
- DCS1800: 29±1.5dBm
- UTRA FDD band I: 23±1.5dBm
- UTRA FDD band VIII: 20±1dBm
- E-UTRA FDD: 22±2dBm
- 2.4G WiFi: 18.57 dBm EIRP
- 5G WiFi: 13.61 dBm EIRP
- Non-SRD: 12.71 dBm EIRP
- Bluetooth: 7.92dBm EIRP
