Parts Included
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Screws | 46 pcs |
| B | Screws/Dowels | 26 pcs |
| C | Screws | 8 pcs |
| D | Screws | 16 pcs |
| E | Feet/Caps | 12 pcs |
| F | Decorative Caps | 18 pcs |
Diagram Descriptions:
Page 1 displays an exploded view of all parts and hardware, categorized by letters A through F with their respective quantities.
Assembly Steps
Step 1: Base Frame Assembly
Attach panels 2, 3, 4, 5, and 6 to panel 1 (tabletop) to form the base structure.
Diagram shows panel 1 (tabletop) upside down. Panels 2, 3, 4, 5, and 6 are positioned around it to form the base. Fasteners are indicated.
Step 2: Attaching Side Panels
Connect side panels 8, 9, 10, and 11 to the assembled base structure using dowels and screws.
Diagram shows side panels 8, 9, 10, and 11 being attached to the base structure. Dowels and screws are used for connection.
Step 3: Installing Back Panel and Shelf Supports
Attach the back panel 12 and shelf support pieces 13, 14, 15, and 16 to the main frame.
Diagram shows back panel 12 and shelf support pieces 13, 14, 15, and 16 being attached to the main frame. Fasteners are indicated.
Step 4: Upper Frame Assembly
Assemble the upper section of the frame, potentially including the shelf unit, using various screws (types A, B, D).
Diagram shows the upper section of the frame being assembled, possibly with the shelf unit. Various screws (A, B, D) are used.
Step 5: Final Touches
Attach the feet (type E) to the bottom of the table legs.
Diagram shows the completed bar table with feet (type E) being attached to the bottom of the legs.
Note: The symbol x2 next to a figure indicates that two people are recommended for assembly.
