Parts List
- Ax1
- Bx1
- Cx1
- Dx1
- Ex2
- Fx1
- Gx2
- Hx1
- Ix1
- Jx4 (Screws)
- ax4 (Screws)
- bx2 (Screws)
- cx30
- dx2
- ex2
- gx1
- hx1
- jx1
- kx2
- fx4
- M6x18 (Screw)
- M6x25 (Screw)
- M6x30 (Screw)
Assembly Instructions
- Attach part Ax1 to part Bx1 using screw Jx4.
- Attach part Cx1.
- Attach part Dx1.
- Attach part Ex2.
- Attach part Fx1.
- Attach part Gx2.
- Attach part Hx1.
- Attach part Ix1.
- Use screws Jx4 for assembly.
- Use screws ax4 and bx2 for assembly.
- Assemble using parts cx30, dx2, and ex2.
- Assemble using parts gx1, hx1, jx1, kx2, and fx4.
- Connect the power supply: Ensure to use the specified DC 5V 2A power adapter.
Safety and Technical Information
Warnings and Personal Safety
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
- The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.
- Plug the USB connector of the unit into the USB jack of the supply.
- This product is powered by DC 5V. Press the switch button to turn on the massage after power on, and press the switch again to close the function.
Technical Specifications
Input Voltage: DC 5V
Input Current: 2A
Important: MUST USE DC 5V 2A power adapter.
