PawHut 6 Meals Automatic Pet Feeder

Introduction

Thank you for purchasing the PawHut Automatic Pet Feeder. Please read these instructions carefully and keep this manual for future reference.

The feeder is powered by 3xAA batteries (not included).

Components:

Small button
Food tray lid
Food storage tray
Battery compartment
Non-slip mat

Bottom of equipment

1. Unscrew the battery compartment cover with a screwdriver.

2. Install 3xAA batteries and tighten the cover.

Operation Instruction

1. Loosen the small button.

2. Turn the lid counterclockwise by hand to open the top cover.

3. Lift the lid up.

4. Pour in the pet food. You can put dry food, wet food, and pet snacks into 6 isolated trays.

Specifications

Product Name: 6 Meals Automatic Pet Feeder
Dimensions: 305x305x72mm
Item Weight: 0.9kg
Material: ABS, PC
Color: White and Grey
Power: Powered by 3xAA batteries

Control Panel

The control panel includes:

Time: Displays the current time.
Feeding Schedules (time1, time2, time3, time4): Set feeding times.
ON/OFF button: To turn the device on or off, and to lock/unlock the screen.
SET button: Used for setting time and feeding schedules.
+/- buttons: Used to increase or decrease values (time, settings).
Battery Indicator: Shows the battery level.

Time Setting

The feeder uses a 24-hour clock system, divided into 4 feeding times. Default times are 06:00, 11:00, 16:00, and 21:00.

The feeder will play music automatically at each feeding time to attract pets.

1. Wake up and lock Screen

Wake up: Press the “ON/OFF” button. The screen will light up and display “12:00” by default.
Lock screen: After setting the time and feeding plan, press the “ON/OFF” button. All functions will turn off, but current settings are saved (as long as power is not interrupted).

2. Time Setting

In the wake-up state, short press the “SET” button. The hour icon will flash.
Press the “+/-” button to adjust the hour.
Short press the “SET” button again. The minute icon will flash.
Press the “+/-” button to adjust the minutes.
Press the “SET” button again to confirm the current time setting. The screen will display the current time.

3. Feeding Plan Setting

In the wake-up state, long press the “SET” button for 3 seconds. The time1 icon will flash, and the hour will flash (default is 06:00).
Press “+/-” to set the desired hour.
Short press “SET” to switch to minutes.
Press “+/-” to set the desired minutes.
Press “SET” again. The time2 icon will flash, and the hour will flash (default is 11:00). Adjust as needed.
Repeat steps 2-4 for time2.
Repeat steps 2-4 for time3 and time4.

4. Feeding Plan Times Cancel Setting

Cancel setting: To cancel a feeding time, repeat the feeding plan setting steps. Set the desired time to 00:00, then press “-” to display “--:--”. The feeding time is canceled, and its icon will not appear.
Recover setting: Repeat the feeding plan setting steps. Press “SET” until you find a feeding plan showing “--:--”. Press “-” to restore the feeding time. The time icon will reappear.

Clean the food storage tray

1. Turn counterclockwise to open the food storage tray.

2. Rinse the food storage tray with water.

Install the food storage tray

1. Align the components and put them in place.

2. Tighten clockwise.

CAUTION: If not tightened properly, the food storage tray may shift and become misaligned.

Safety Precautions

This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the appliance before being charged.
Different types of batteries or new and used batteries are not to be mixed.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the appliance and safely disposed of.
If the appliance is to be stored unused for a long period, the batteries should be removed.
The supply terminals are not to be short-circuited.

	PawHut Pet Bowl Stand Assembly Instructions Comprehensive assembly guide for the PawHut pet bowl stand, including parts list, hardware, and step-by-step instructions. Model numbers: IN220800245V01_GL, D08-015, D08-015V00, D08-016.
	PawHut D08-071V90/D08-071V80 Cat Water Fountain User Manual User manual for the PawHut D08-071V90 and D08-071V80 stainless steel cat water fountain. Includes assembly instructions, parts list, and technical specifications.
	PawHut Pet Stroller User Manual User manual for the PawHut Pet Stroller, model D00-109. Provides assembly instructions, usage guidelines, and cleaning information for pet owners.
	PawHut Elevated Dog Bowls with Storage Cabinet Assembly Instructions Step-by-step assembly guide for the PawHut Elevated Dog Bowls with Storage Cabinet (Model D08-040V00). Includes parts list, hardware, and assembly instructions with diagrams described in text.
	PawHut Pet Stroller User Manual and Safety Guide Comprehensive guide for PawHut pet strollers, covering important safety warnings, maintenance, and care instructions. Includes multilingual support and contact information for customer service.
	PawHut 4-Step Pet Stairs Assembly and Instruction Manual This manual provides assembly instructions for the PawHut 4-Step Pet Stairs (Model D06-078). It includes a list of parts and hardware, along with step-by-step diagrams for assembly.
	PawHut Pet Stroller User Manual: Assembly, Use, and Care Comprehensive guide for the PawHut Pet Stroller (models D00-167V00, D00-167V01). Learn how to assemble, use, maintain, and safely operate your pet stroller.
	PawHut Elevated Dog Bowls with Storage Drawer Assembly Instructions Comprehensive guide for assembling the PawHut Elevated Dog Bowls with Storage Drawer (Model D08-039V00), including parts list, hardware, and step-by-step instructions.