PawHut 4-Step Pet Stairs Assembly & Instruction Manual
Model: INDbg008V01_GL / D06-078
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Parts List
- Part 1: Top Step Surface (x01)
- Part 2: Side Panel (x04)
- Part 3: Step Surface (x04)
- Part 4: Front Support (x01)
- Part 5: Back Support (x01)
- Part 6: Middle Support (x01)
- Part 7: Middle Support (x01)
- Part 8: Middle Support (x01)
- Part 10: Middle Support (x01)
- Part 11: Back Panel (x01)
- Part 12: Back Panel (x01)
Hardware List
- Hardware A: Screws (x16 + 1 spare)
- Hardware B: Screws (x12 + 1 spare)
- Hardware C: Brackets (x04)
- Hardware D: Screws (x08 + 1 spare)
- Hardware E: Allen Wrench (x01)
Assembly Instructions
Step 1
Attach Part 4 (Front Support) and Part 8 (Middle Support) to Part 11 (Back Panel) using Hardware B (screws) and Hardware C (brackets). Ensure the parts are aligned correctly as shown in the diagram. Repeat for the other side.
Step 2
Connect the assembled side panels from Step 1 to the base structure. Use Hardware A (screws) to secure the side panels to the back panel and any connecting supports. Ensure the structure is stable.
Step 3
Attach the first step surface (Part 1) to the top of the assembled structure. Use Hardware A (screws) to secure it. Then, attach the remaining step surfaces (Part 3) to the lower levels of the structure using Hardware A (screws).
Step 4
Slide the remaining side panels (Part 2) into place, ensuring they fit snugly against the step surfaces and the main structure. Secure these panels as indicated in the diagram, likely using Hardware A or B.
Step 5
Complete the assembly by attaching the remaining step surfaces (Part 3) to the lower steps. Use Hardware A (screws) to firmly secure each step. The assembly is now complete.
