Introduction
Leben. Im besten Licht! See the world in a new light, Yeelight!
Please read this manual carefully before use, and retain it for future reference.
For more information, visit www.yeelight.de or www.yeelight.com.
Manufacturer: Yeelight Europe (WEEE-Reg.) / Manufactured by: Qingdao Yeelink Information Technology Co., Ltd.
Address (Germany): Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt, Deutschland
Address (China): F10-B4, Bldg. B, International Innovation Park, 169 Songling Rd., Laoshan, Qingdao City, 266101
Email: support@yeelight.de
Installation Instructions
1. Install the Light Bulb
An illustration shows a hand screwing a light bulb into a lamp socket, followed by an arrow pointing to a hand flipping a light switch to the 'ON' position.
Important Safety Notes:
- ⚠️ Make sure that the power is off when installing, removing, or examining the light bulb.
- Do not use this product with a dimmer (e.g., a desk lamp with a dimmer switch) to avoid damaging the product.
- Do not use this product in a damp environment.
- Do not use the light bulb in a narrow and ill-ventilated lamp shade, as it may cause weak signals or heat dissipation issues.
Install the Yeelight App
1. Download the App
Search for Yeelight in your app store or scan the QR code [QR Code] to download the Yeelight App.
2. Use the App
Open the app and operate it in accordance with the instructions provided on the screen. Make sure that a stable Wi-Fi network is available and can access the Internet properly.
Connect Yeelight Device to Razer Chroma™ RGB (YLDP13YL)
- Update the firmware of the device to the newest version in the Yeelight App (after adding the device in the app).
- Enable LAN Control for the device in the Yeelight App.
- Download Razer Synapse 3 (available for free on razer.com) if not already installed, and enable Chroma Connect for Yeelight within it.
- Download the Yeelight Chroma Connector Plug-in (available for free on yeelight.com and razer.com) and enable its use with Chroma for the device.
Smart Home Integration
Link with Google Assistant
Add the Yeelight service to your Google Assistant app to control Yeelight-connected devices via Google Assistant.
- In the Google Assistant app, tap [Google Assistant icon], search for "Yeelight", tap "Link", and sign in with your Yeelight account.
- Tap [Add Device icon] in Settings > Home control to add a device, and follow the on-screen instructions. Once accounts are linked, you can control the Yeelight device via Google Assistant.
Link with Amazon Alexa
Add the Yeelight skill to the Amazon Alexa app to control Yeelight-connected devices via Amazon Alexa.
- In the Amazon Alexa app, tap [Menu icon], then tap "Skills & Games". Search for "Yeelight", select the correct skill, and tap "Enable". Then sign in with your Yeelight account.
- After successfully linking accounts, tap "Discover Devices" to add the device and follow the on-screen instructions. Once accounts are linked, you can control the Yeelight device via Amazon Alexa.
Link with Apple HomeKit
- Open the Home app on your iPhone or iPad.
- Tap "Add Accessories" and follow the app instructions to scan the QR code on the product base, or enter the 8-digit setup code above the QR code to grant Apple Home app access.
⚠️ Make sure a Wi-Fi network with Internet access is available (this product does not support 5G networks).
To control this HomeKit-compatible accessory, iOS 9.0 or above is recommended. The HomeKit setup code is listed on the product base; do not lose it, as it is needed after a factory reset to re-add the accessory. iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
Product Details
Yeelight Smart LED Lamp 1S (Dimmable) - Model YLDP15YL
| Parameter | Specification |
|---|---|
| Model No. | YLDP15YL |
| Product Name | Yeelight Smart LED Lamp 1S (Dimmable) |
| Dimensions | 60x60x124 mm |
| Lamp Holder | E27 |
| Luminous Flux (Brightness) | 40-800 lm, adjustable |
| Color Temperature | 2700 K |
| Rated Input | 220-240V ~ 50/60 Hz 0.04 A |
| Rated Power | 8.5 W |
| Wireless Connectivity | WLAN IEEE 802.11 b/g/n 2.4 GHz |
| Frequency Bands | 2400-2483.5 MHz |
| Life Expectancy | ≥ 25000 hours |
Yeelight Smart LED Lamp 1S (Color) - Model YLDP13YL
| Parameter | Specification |
|---|---|
| Model No. | YLDP13YL |
| Product Name | Yeelight Smart LED Lamp 1S (Color) |
| Dimensions | 60x60x124 mm |
| Lamp Holder | E27 |
| Luminous Flux (Brightness) | 40-800 lm, adjustable |
| Color Temperature | 1700-6500 K, adjustable |
| Rated Input | 220-240V ~ 50/60 Hz 0.04 A |
| Rated Power | 8.5 W |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| Frequency Bands | 2400-2483.5 MHz |
| Life Expectancy | ≥ 25000 hours |
Product Features
- ☀️ Adjustable Brightness
- ? Night Light
- ? Adjustable Color Temperature (YLDP13YL)
- ? Color Adjustment (YLDP13YL)
- ?️ Different Lighting Scenes
- ⏰ Timer Function
- ?️ Personalized Schedules
- ? Voice Control and Control via App
- ? Energy Saving
- ⬆️ Firmware Upgrade
- [Razer Chroma RGB logo] Supports Razer Chroma RGB Integration (YLDP13YL)
LED Lamp (Color) Specifics
For the Color Version:
- The default color temperature of the lamp is 3500K.
- The maximum operating power of the product is in the default state.
- It is recommended to use the default state of the lamp for lighting.
Reset to Factory Settings
Turn the light switch off and on five times (on for two seconds, off for two seconds) within a short interval. The Yeelight 1S (Dimmable) will enter a breathing mode and automatically reset itself after 5 seconds. The Yeelight 1S (Color) will flash alternating colors, then automatically restart and display white light after 5 seconds, indicating a successful factory reset.
Troubleshooting
| Functional Fault | Type of Malfunction |
|---|---|
| The lamp does not turn on when connected to power. | Light bulb is not turned on when connected to power. |
| The lamp blinks abnormally. | Light bulb blinks abnormally. |
| The lamp cannot connect to the app despite a working internet connection. | Light bulb is not connected to the app under right internet connection. |
| Malfunctions affecting use or safety due to product defects (not user-caused). | A malfunction that affects use or safety due to a compromised product structure (other than those caused by a user). |
Safety Instructions
- Ensure the voltage used matches the product's specified voltage. Using an incorrect voltage can damage the product and pose safety risks.
- Do not disassemble the product, as the light diodes can cause eye damage.
- The lamp generates heat during operation. Do not use it in a confined enclosure for extended periods. Ensure adequate ventilation for heat dissipation.
- The optical radiation of this LED product complies with Lamp Safety Standard IEC 62471:2006.
- For indoor use only.
- Disconnect power before installation to prevent the risk of electric shock.
- Use in dry locations only.
- The light source of this product consists of non-replaceable light diodes (LED).
- This device is not intended for emergency exit lighting or emergency lighting.
- Only use the control provided with or specified by these instructions to operate this lamp. It will not function correctly with standard (incandescent) dimmers or dimming controls.
- If replacing lamps with significantly heavier ones, consider that the increased weight may compromise the mechanical stability of luminaires and lampholders, potentially affecting contact and lamp retention.
Declarations and Compliance
EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Smart LED Lamp 1S (Dimmable/Color) complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available upon request from Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt.
WEEE Disposal and Recycling
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use local return and collection systems or contact the retailer where the product was purchased for environmental safe recycling.
FCC Compliance Statement (USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This device can generate radio frequency energy, which could cause interferences to products such as radio, TV, baby monitor, cordless phone, Bluetooth, wireless router, etc. If interference occurs, try to correct it by: (1) Reorienting or relocating the receiving antenna. (2) Increasing the spacing distance between the equipment and receiver. (3) Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected. (4) Consulting the dealer or an experienced radio/TV technician. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
About Yeelight
Yeelight is the world-leading smart lighting brand, focusing on smart interaction, distinctive design, and lighting experience. Yeelight sets high standards in the lighting industry, offering a portfolio of smart home lighting products including home furnishing lights, table lights, ambiance lights, and smart lighting control products. Yeelight integrates cutting-edge technology and professional optical research into its products.
If you appreciate Yeelight products, feel free to like their Facebook fan page, rate products in their online store, or leave a review on Google.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Google Play and the Google Play logo are trademarks of Google Inc. Apple and HomeKit are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
