Yeelight Smart LED Bulb W3 Multicolor User Manual

Installation and Steps

01 Install the bulb

Install the bulb and turn on the power.

Diagram: Screw the bulb into the socket, then flip the light switch to the ON position.

Notes:

• Make sure that the power is off when installing, removing, or examining the light bulb.
• Do not use this product in a lamp with a dimmer (e.g., a desk lamp with a round dimmer switch) to avoid damaging the product.
• Do not use this product in a damp environment.
• Do not use the light bulb in a narrow and ill-ventilated lamp shade as it may cause weak signals or heat dissipation issues.

Connect to Yeelight App

This product can be controlled on the Yeelight App and configured to interact with other Yeelight products.

Download App

Search for "Yeelight" in an App store or scan the QR code to download and install the App.

Add Device

• Go to the Yeelight App homepage, and click "+" in the upper right corner to add your device.
• Proceed with the configuration as instructed on the App.
• Once you've added a device successfully, you can find it in the device list.

Note: The operation procedure may differ from what's described here due to App updates. Please proceed as instructed on the App.

This product can also be controlled on Mi home, Google Home App, and Amazon Alexa. You can download and install one of these Apps from an App store, and configure your device as instructed on the App. After you have finished the configuration, you can use the App to control the light.

How to Restore to Factory Settings

Use the light switch to turn the light bulb on and off five times (on for two seconds, off for two seconds). The light bulb will display a circling multi-colored effect, then automatically reset itself and display a white light after five seconds. This shows that the light bulb has been restored to its factory settings.

Specifications

• Model: YLDP005
• Lamp Fitting: E27
• Rated Power: 8 W
• Luminous Flux: 900 lumens
• Rated Input: 100-240 V ~ 50/60 Hz 0.07 A
• Color Temperature Range: 1700-6500 K
• Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
• Service Life: Approx. 15,000 h
• Operating Temperature: -10°C to 40°C
• Operating Humidity: 0-85% RH
• Operating Frequency: 2412 – 2472 MHz
• Maximum Output Power: 16.47 dBm
• Dimensions: φ60 × 118 mm

Product Features

Warning

• ⚠️ Before using this product, please make sure that your voltage is appropriate for this product's working voltage. Using this product with a voltage other than the one specified may damage the product and cause safety hazards.
• ⚠️ Do not disassemble this product, as the light diodes can cause damage to the eyes.
• ⚠️ The light bulb will heat up when working. Do not use it in a confined holder for an extended period of time. Ensure sufficient ventilation for the light bulb to allow for heat dissipation.
• For indoor use only.
• Disconnect power before installation to prevent risk of electronic shock.
• Optical radiation of this LED bulb complies with the "Exemptions and Requirements" of IEC 62471-2006.
• Do not use in locations directly exposed to water.
• Do not use with dimmers.
• The light source of this product is non-replaceable light-emitting diodes (LEDs).
• For bulbs with a significantly higher weight than those they replace, attention should be paid to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.

Compliance and Disposal

EU Declaration of Conformity

Hereby, Qingdao Yeelink Information Technology Co.,Ltd., declares that the radio equipment type YLDP005 is in compliance with Directive 2014/53/EU.

WEEE Disposal and Recycling

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Manufacturer Information

Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.

Address: 10F-B4, Building B, Qingdao International Innovation Park, No.1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong Province, P.R.China

Website: www.yeelight.com

Customer Service Email: support@yeelight.com