Instruction Manual R-7670

Safety Precautions

When using your kettle basic safety precautions should always be followed, including the followings:

1. Read all instructions carefully and thoroughly before the kettle operation.
2. Close supervision is necessary when any appliance is used by or near children.
3. Before connecting the kettle, check whether the voltage indicated on the appliance (underside of kettle and base unit) corresponds with the mains voltage in your home. If this is not the case, contact your dealer and do not use the kettle.
4. Switch off and unplug from the outlet before filling, emptying, cleaning, or using the kettle.
5. Do not overfill, as boiling water may be ejected. Fill with cold water only, up to the maximum level indicator.
6. Do not operate in the presence of explosive and/or flammable fumes, to avoid fire. Do not operate or place any part of this appliance on or near a gas and electric burner or in a heated oven.
7. Do not let the cord hang over the edge of a table or a counter, nor touch hot surfaces.
8. Never yank on the cord as this may damage the cord and eventually cause a risk of electric shock.
9. If the cord or plug is damaged, or after the appliance malfunctions, is dropped or damaged in any way, return the appliance immediately to your nearest authorized service agent for examination, repair or adjustment.
10. Avoid touching the surface of the hot kettle; use the handle and knobs.
11. To avoid possible steam damage, do not face the spout when operating the kettle.
12. If operated on wood furniture, use a protective pad to prevent damage on delicate finishes.
13. To avoid scalding, always ensure the lid is correctly positioned before operation.
14. Scalding may occur if the lid is removed while heating.
15. Remove and replace the lid carefully when hot.
16. Extreme caution must be used when moving the kettle containing hot water. Never lift the kettle by its lid. Always use the body handle.
17. Do not switch your kettle on if it is empty.
18. To protect from electrical hazard, do not immerse the kettle, its power base or cord set in any liquid.
19. Use the kettle only with the supplied base unit. Do not use the base unit for any other purposes.
20. To protect against fire, must not be operated in the presence of explosive and/or flammable fumes.
21. While the water is boiling or in the short time after it does, please be sure that the cover remains closed for avoiding scalding your hand with the steam.
22. Please avoid liquid sprinkling in the LCD board and the pressed key place in the operating process. The water could plunge in the product and cause malfunction.
23. Please do not surpass the maximum water volume. This might damage the product.
24. Please regularly clean descale or pot bottom residuum, otherwise the normal use of the product could be affected.
25. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or other similarly qualified person in order to avoid hazard.
26. This appliance should not be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised by the person who is responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
27. This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
28. Appliances can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
29. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
30. This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices and other working environments; - farm houses; - by clients in hotels, motels and other residential type environments; - bed and breakfast type environments.
31. WARNING: Avoid spillage on the connector
32. WARNING: If the kettle is overfilled, boiling water may be ejected.

Identification of Parts

A description of the Rohnson R-7670 electric kettle:

• Body: The main transparent container of the kettle, made of glass, showing the water level.
• Kettle Lid: The top cover of the kettle.
• Lid Release Button: A button to open the kettle lid.
• Handle: The ergonomic handle for holding and pouring.
• Water Level Gauge: A visible indicator on the body showing the water level (MIN to MAX, 0.5L to 1.7L).
• Temperature Display: An LED display on the handle showing the current water temperature or status.
• Power Base: The unit the kettle sits on, which connects to the power outlet and heats the kettle.

Instruction for Use

Preparatory Work Before Use

• Before first use, fill the kettle with clean water to maximum capacity and boil. Discard the water and repeat the process.
• The kettle should always be unplugged when filling or adding water.
• Fill the kettle with water up to the desired level. Do not overfill, otherwise there will be a risk of spillage or spitting. The water level indicator will assist you to measure the correct amount. You can fill the kettle via the spout or after opening the lid. Do not forget to close the lid after filling, otherwise the kettle will not automatically switch off after use.
• Do not fill with less than 0.5 liters of water (to “min” indication) to prevent the kettle running dry while operating.
• Do not fill with less than 1.7 liters of water (to “max” indication).
• An automatic safety cut-out has been fitted for protection against overheating. It will operate if the kettle is switched on when containing insufficient water. Always ensure the water inside the kettle covers the minimum mark on the water level indicator gauge. If the automatic safety cut-out has operated, switch the kettle off, disconnect from the power outlet and allow the kettle to cool down for 5 to 10 minutes. Refill and switch on, the kettle will work as normal.
• After boiling, the kettle switches off automatically.
• Disconnect the kettle from the electricity supply.
• Do not open the lid when pouring.
• If the kettle is overfilled, boiling water may be ejected.
• The kettle is only to be used with the stand provided.
• This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farmhouses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

Basal Operation

1. Put the base on a dry, smooth and horizontal surface and insert the plug to the socket. When the kettle is inserted into the base, the power puts through automatically, a “DI-DI” sound will be heard and the word “ON” will be displayed, followed by the present temperature of water.
2. Press the [power-hold-button] shortly. The kettle starts running when the sound "Di" is heard.
3. After the water boils, the indicator turns off.
4. Simultaneously the buzzer sends out a “di-” sound.

Advanced Operation

1. Press the [power-hold-button] for 3 seconds. When the buzzer sends out a "di" sound the appliance starts running in the heat insulation function. The LED indicator will be shining with a red light. After the water boils, the kettle will keep the water temperature for 2 hours with the indicator light shining. The heat insulation function will be running for 2 hours, and it will switch on heating mode again when the temperature arrives at 85°C.
2. Press the [temperature-plus-button] once: the LED light indicator shines with a green hue for 60°C. This suggests that the kettle will stop heating when the water temperature is 60°C.
3. Press the [temperature-plus-button] twice: the LED light indicator shines with a blue hue for 70°C. This suggests that the kettle will stop heating when the water temperature is 70°C.
4. Press the [temperature-plus-button] three times: the LED light indicator shines with a yellow hue for 80°C. This suggests that the kettle will stop heating when the water temperature is 80°C.
5. Press the [temperature-plus-button] four times: the LED light indicator shines with a purple hue for 90°C. This suggests that the kettle will stop heating when the water temperature is 90°C.

After using the appliance, unplug the power socket.

Cleaning & Care

Exterior Cleaning

Let the kettle cool down before cleaning. Before you clean your kettle, unplug and make sure all water is poured out from the kettle. Do not immerse the appliance or its base in water or any other liquid or hold it under a running tap to clean. Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove stubborn spots with a cloth, moistened with mild liquid detergent. Do not use abrasive scouring pads or powders. Never immerse the kettle in water or other liquids. From time to time, depending on the nature of your water supply, a boiled scale deposit is naturally formed and can be found mostly adhered to the heating element, thus reducing the heating efficiency. The amount of boiled scale deposited (and subsequently the need to clean or rescale) largely depends on the water hardness in your area and the frequency with which the kettle is used. Boiled scale is not harmful to your health. But if poured into your beverage, can give a powdery taste to your drink. Therefore, the kettle should be descaled periodically as indicated below.

Interior Cleaning (Descaling)

Descale kettle regularly. With normal use: at least twice a year

1. Fill the kettle up to “max” with a mixture of one-part ordinary vinegar and two parts water. Switch on and wait for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to “max” mark and boil again.
5. Discard the boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.

Technical Characteristics

POWER: AC 220-240V 50-60Hz 1850-2200W

Important Information for Correct Disposal

In accordance with EC Directive 2002/96/EC:

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection center or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health, deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a [crossed-out-wheelie-bin-symbol].

[CE-mark]