Razer DeathAdder V3 Pro

What's Included

• Razer DeathAdder V3 Pro

A. Left Mouse Button

B. Status Indicator

C. Right Mouse Button

D. Scroll Wheel

E. Mouse Button 5

F. Mouse Button 4

G. USB Type C Port

H. PTFE Mouse Feet

I. Power/DPI Cycle Button

J. Razer Focus Pro 30K Optical Sensor

*Sensitivity (DPI) levels are: 400, 800 (default), 1600, 3200, and 6400. These can be customized via Razer Synapse.

Wireless USB Dongle + USB Dongle Adapter

Speedflex USB Type A to USB Type C Cable

Important product information

What You Need

Product Setup

• USB Type A Port

Razer Synapse Setup

• Windows® 10 64-bit (or later)
• macOS 15 with Apple Silicon "M" series (or later)
• Internet connection for software installation

We're Here For You

Register your product and get exclusive benefits at razerid.razer.com/warranty

Your product's serial number can be found here.

Technical Specifications

• Form Factor: Right-handed
• Connectivity: Razer HyperSpeed Wireless
• Battery Life: Up to 90 hours (constant movement at 1000 Hz)
• RGB Lighting: None
• Polling Rate/Interval:
  • 1000 Hz with the included Razer HyperSpeed Wireless Dongle
  • 4000 Hz with the Razer HyperPolling Wireless Dongle (sold separately)
• Sensor: Focus Pro
• Max Sensitivity (DPI): 30,000
• Max Speed (IPS): 750
• Max Acceleration (G): 70
• Programmable Buttons: 5
• Switch Type: Optical
• Switch Lifespan: 90 million clicks
• Onboard Memory Profiles: 1
• Mouse Feet: 100% PTFE
• Speedflex Cable: USB Type C
• Tilt Scroll Wheel: No

Configuring Your Razer DeathAdder V3 Pro

Charging Your Mouse

Connect the charging cable from a USB port on your PC to your Razer DeathAdder V3 Pro. For best results, fully charge your mouse before first use. A completely depleted battery recharges in approximately 4 hours.

Install Razer Synapse when prompted or download the installer from razer.com/synapse

Connecting Your Mouse

A. Via Wired Mode

Connect the mouse to a USB port on your PC using the charging cable to use it in wired mode.

B. Via Razer™ HyperSpeed Wireless (2.4GHz)

1. Plug the wireless USB dongle into your PC.
2. Press and hold the Power/DPI Cycle button for 3 seconds to turn on the mouse.

Your Razer DeathAdder V3 Pro is now ready for use in wireless mode.

Using Your Razer DeathAdder V3 Pro

Low Battery Notification

The status indicator will blink red twice at regular intervals to indicate a battery level below 5%. This lighting sequence will continue until the battery is completely depleted or the mouse is connected to a PC via the charging cable.

Power On/Off

Press and hold the Power/DPI Cycle button for 3 seconds to turn the mouse on or off.

Customizing Your Mouse with Razer Synapse

Change your mouse's DPI to match your playstyle with a simple press of the Power/DPI Cycle button, or fine-tune your sensitivity in detail with the Razer Synapse application. The status indicator will briefly change color to indicate which DPI level is active.

Status Indicator

Power/DPI Cycle Button

Configuring Your Razer DeathAdder V3 Pro with Razer Synapse

An internet connection is required for installation, updates, and cloud-based features. Your Razer ID account is recommended (optional). Features are subject to change based on the current software version, connected devices, or installed applications.

Modules

The Modules tab displays all installed and available modules for installation.

• ALEXA: Integrates Amazon Alexa Voice Service with Synapse 3 for all Chroma-compatible devices. Requires an active microphone and an Amazon Alexa account.
• CHROMA CONNECT: The control center for all third-party applications and devices compatible with Chroma. Configure priorities for your favorite games and activate other RGB devices to sync with Razer Chroma for an immersive gaming experience.
• CHROMA STUDIO: Unlock advanced Razer Chroma™ capabilities with Chroma Studio, allowing you to create intricate lighting effects synchronized across all your devices, while mapping exact device placement on your desk. Manage all your Chroma-compatible games and applications from the App...
• CHROMA VISUALIZER: Chroma Visualizer synchronizes all your Chroma-compatible devices and smart lights with your media for an enjoyable and immersive listening experience. Set the mood for your room while listening to music or watching a video, and even activate it automatically...
• HUE: Discover a new level of immersion with the Philips Hue module. Sync your Razer Chroma-compatible devices with your Hue bridge, and let the gaming experience transcend your screen and peripherals. Sync your Philips Hue bridge via the Hue tab.
• MACRO: Create powerful macros for your favorite games with the Macro module. Easily create a complex chain of button presses and execute winning combinations with a single press.

Global Shortcuts

Assign Razer Synapse operations or functions to custom key combinations for all compatible device inputs that will activate across all your device profiles. Learn more about Profiles.

• Only inputs from Razer Synapse-compatible devices will be recognized.

Global shortcuts are custom key combinations that work for all device profiles. This feature only works with commands from Razer Synapse 3-compatible devices.

[Add Shortcut]

Mouse Tab

The Mouse tab is the primary tab for your Razer DeathAdder V3 Pro. From this tab, you can change your device's settings, such as button configuration and DPI sensitivity. Changes made in this tab are automatically saved to your system and cloud.

Customize

The Customize sub-tab allows you to modify your mouse's button configuration.

Sidebar

Clicking the Sidebar button () will display all current button configurations for your Razer DeathAdder V3 Pro.

You can also switch to a specific button configuration by selecting it in the Customize tab.

When selecting a button configuration, you may be prompted to change it to one of the following functions:

• Default: This option allows you to revert to the mouse buttons' default configuration.
• Keyboard Function: This option changes the button configuration to keyboard functions. You can also choose Activate Turbo Mode, which allows you to emulate repetitive actions by activating the keyboard function while you press the button.
• Mouse Function: This option replaces the current button configuration with another mouse function. Below are the functions you can choose from:
  • Left Click - Executes a left mouse click using the chosen button.
  • Right Click - Executes a right mouse click using the chosen button.
  • Scroll Click - Activates the universal scroll function.
  • Double Click - Executes a left mouse double-click using the chosen button.
  • Mouse Button 4 - Executes a "Previous" command in most browsers.
  • Mouse Button 5 - Executes a "Next" command in most browsers.
  • Scroll Up - The chosen button executes the command "Scroll Up".
  • Scroll Down - The chosen button executes the command "Scroll Down".
  • Scroll Left - The chosen button executes the command "Scroll Left".
  • Scroll Right - The chosen button executes the command "Scroll Right".
  • Repeat Scroll Up - The chosen button continuously executes the command "Scroll Up".
  • Repeat Scroll Down - The chosen button continuously executes the command "Scroll Up".
  You can also choose Activate Turbo Mode within one of the mouse functions, which allows you to emulate repetitive actions by activating and deactivating the function while pressing the button.

Sensitivity

This function allows you to adjust the sensitivity of your Razer DeathAdder V3 Pro by pressing a button. Below are the different sensitivity options and their descriptions:

• Sensitivity Clutch: The chosen button changes the sensitivity to a defined DPI. Releasing the button returns you to the previous sensitivity.
• Increase Sensitivity: Increases the current sensitivity by one level.
• Decrease Sensitivity: Decreases the current sensitivity by one level.
• Sensitivity on the Fly: Press the chosen button and scroll the mouse wheel up or down to increase or decrease the current sensitivity.
• Increase Sensitivity Cycle: Increases the current sensitivity level by one level. Once you reach the highest sensitivity level, it will revert to level 1 when you press the button again.
• Decrease Sensitivity Cycle: Decreases the current sensitivity level by one level. Once you reach sensitivity level 1, it will cycle to the highest sensitivity level when you press the button again.

Click here to learn more about sensitivity levels.

Macro

A macro is a pre-recorded sequence of keyboard and button presses executed with precise timing. By configuring a button's function to Macro, you can easily execute a series of commands. This function is only visible when the macro module is installed.

Change Profile

Changing profiles allows you to quickly switch between profiles and load a new set of button configurations. An on-screen notification will appear when you change profiles.

Inter-device Function

The inter-device function allows you to modify the functionality of other devices running on Razer Synapse. Some of these functionalities are device-specific, such as using your Razer keyboard to adjust the sensitivity of your Razer mouse.

Razer Hypershift

Configuring the button to the Razer Hypershift function will allow you to activate Hypershift mode as long as you press the button.

Launch Program

Launch Program allows you to open an application or a web page using the assigned button. When you select Launch Program, two options will appear, allowing you to search for a specific application you want to open, or enter the address of a web page you wish to visit.

Multimedia

This option allows you to assign multimedia commands to your Razer device. Below are the multimedia commands you can choose from:

• Volume Down - Decreases audio volume.
• Volume Up - Increases audio volume.
• Mute Volume - Mutes the sound.
• Increase Mic Volume - Increases microphone volume.
• Decrease Mic Volume - Decreases microphone volume.
• Mute Mic - Mutes the microphone.
• Mute All - Mutes the microphone and audio volume.
• Play/Pause - Play, pause, or resume the current media playback.
• Previous Track - Play the previous media track.
• Next Track - Play the next media track.

Windows Shortcuts

This option allows you to assign a mouse button to a Windows operating system shortcut. For more information, visit: support.microsoft.com/kb/126449

Text Function

The Text Function allows you to type pre-written text by pressing a button. Simply write the desired text in the appropriate field, and your text will be typed as soon as you press the associated button. This function is fully Unicode-enabled, and you can insert special characters and symbols.

Disable

This option renders the associated key unusable. Use the Disable option if you do not want to use the selected button or if it interferes with your work.

Performance

The Performance sub-tab allows you to adjust sensitivity, acceleration, and polling rate.

Sensitivity

Sensitivity refers to the distance the cursor travels in relation to the mouse's movement distance. The higher the sensitivity, the greater the distance the cursor travels, even if the mouse's movement distance remains the same.

Sensitivity Levels

A sensitivity level is a predefined sensitivity value. You can create up to 5 different sensitivity levels, which you can cycle through using the DPI button. You can use Activate X/Y Sensitivity simultaneously with this option.

Activate X/Y Sensitivity

By default, the X-axis (horizontal) and Y-axis (vertical) use the same sensitivity values. However, you can set different sensitivities for each axis by selecting the Activate X/Y Sensitivity option.

Polling Rate

The higher the polling rate, the more information the computer receives about your mouse's status, effectively reducing input latency and improving pointer reaction time. You can switch between 125 Hz, 500 Hz, and 1000 Hz by selecting your desired polling rate from the available options.

Mouse Properties

You can access Windows mouse properties to modify your operating system settings that directly affect your Razer DeathAdder V3 Pro.

Calibration

The Calibration sub-tab allows you to optimize the Razer Precision sensor on any surface for better tracking.

Smart Tracking

Smart Tracking allows you to set the distance at which the sensor stops tracking when lifted from the surface, to prevent unwanted cursor movement. You can assign different values for lift-off and landing distances by selecting Activate Asymmetric Lift-Off.

Reset

To reset your mouse, press and hold the left and right buttons and the scroll wheel for 7 seconds.

Power

The Power tab allows you to manage your device's power consumption by powering it off when it's idle for a certain period. You can also adjust the required battery percentage for the mouse when entering Low Power Mode to conserve battery life.

Profiles Tab

The Profiles tab is a convenient way to manage all your profiles and associate them with your games and applications.

Devices

View which games are associated with each device's profiles or which Chroma effect is associated with specific games using the Devices sub-tab.

You can import profiles from your computer or the cloud using the import button (), or create new profiles on the selected device using the Add (+) button. To rename, duplicate, export, or delete a profile, press the More (...) button. With the Associated Games option, each profile can be activated when you launch an application.

Associated Games

The Associated Games sub-tab allows you to add games, view devices associated with games, or search for added games. You can also sort games alphabetically, by last played, or by most played. Added games will always be listed here, even if they are not associated with a Razer device.

To associate games with connected Razer devices or Chroma effects, click on any game in the list, then click Select a device and its profile to launch automatically during the game session to select the Razer device or Chroma effect to associate. Once connected, click the More (...) button for the corresponding Chroma effect or device to select the Chroma effect or a specific profile.

Settings Window

The Settings window, accessible by clicking the button () in Razer Synapse, allows you to configure the startup behavior and display language of Razer Synapse, view the user guides for each connected Razer device, or perform a factory reset for connected Razer devices.

General Tab

The General tab allows you to change the display language, startup behavior, display theme, and on-screen notification display of the software. You can also manually sync your profiles to the cloud (2) or view the user guides for all connected Razer devices and installed modules.

Dashboard Tab

Use the Dashboard tab to customize which Razer device recommendations and which games appear on the Dashboard.

Reset Tab

The Reset tab allows you to perform a factory reset on all connected Razer devices with integrated memory and/or reset Razer Synapse tutorials to familiarize yourself with Razer Synapse's new features upon its next startup.

All profiles saved to the selected device's integrated memory will be erased during a Razer device reset.

About Tab

The About tab displays information about the software, as well as a copyright statement and links to its terms of use. You can also use this tab to check for available software updates or quickly access Razer's social communities.

Safety and Maintenance

Safety Guidelines

To use your Razer DeathAdder V3 Pro under optimal safety conditions, we recommend following these instructions:

If you experience difficulties operating your device correctly and troubleshooting does not resolve your issue, unplug your device and contact Razer telephone support or visit support.razer.com.

Do not disassemble the device or attempt to operate it with abnormal current. This will void your warranty.

The Razer DeathAdder V3 Pro requires a USB connection capable of providing sufficient power to charge the device. Charging may fail when you connect your devices to an unpowered USB hub or unpowered USB ports commonly found on keyboards and peripherals.

Keep the device away from liquids and humidity. Operate the device only within a temperature range of 0°C (32°F) to 40°C (104°F). If the temperature exceeds these limits, turn off and/or unplug the device to allow the temperature to stabilize at an optimal level.

Comfort

Research has shown that prolonged periods of repetitive movements, incorrect positioning of your electronic peripherals, incorrect body posture, and bad habits can be associated with physical discomfort and injury to nerves, tendons, and muscles. Here are instructions to avoid injuries and ensure maximum comfort when using your Razer DeathAdder V3 Pro.

• Place your keyboard and screen directly in front of you with your mouse to the side.
• Keep your elbows close to your body, not too far away, and your keyboard within reach.
• Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow level.
• Keep your feet well supported, in an upright position, and your shoulders relaxed.
• While gaming, relax your wrist and keep it straight. If you perform the same tasks with your hands repeatedly, try not to bend, extend, or twist your hands for prolonged periods.
• Do not rest your wrists on hard surfaces for extended periods. Use a wrist rest to support your wrist while gaming.
• Do not remain seated in the same position all day. Stand up, move away from your desk, and do some exercises to stretch your arms, shoulders, neck, and legs.

If you feel any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, neck, or back, consult a qualified medical professional immediately.

Maintenance and Use

The Razer DeathAdder V3 Pro requires minimal maintenance to remain in optimal working condition. Once a month, we recommend disconnecting the device from the computer and cleaning it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning products.

To optimize your movement and control experience, we highly recommend a premium Razer mouse mat. Certain surfaces may wear down the feet, requiring constant maintenance that will lead to replacement. Please note that the Razer DeathAdder V3 Pro is particularly optimized for Razer mouse mats. The sensor has been extensively tested to confirm that the Razer DeathAdder V3 Pro performs better reading and tracking on Razer mouse mats.

Battery Alert

The Razer DeathAdder V3 Pro contains a rechargeable lithium-ion battery. In general, the battery life depends on its usage. If you believe the rechargeable lithium-ion battery of the Razer DeathAdder V3 Pro is depleted (low charge), try recharging it.

Caution: Do not open, damage, or expose to conductive materials (metal), humidity, liquid, fire, or heat. Such practices may lead to battery explosion or leakage, which can cause injury. Battery life varies with your usage.

Legal Mentions

Copyright and Other Intellectual Property Rights Information

©2025 Razer Inc. All rights reserved. Razer, "For Gamers. By Gamers.", "Powered by Razer Chroma" logo, Razer logo, and the three-headed serpent logo are trademarks or registered trademarks of Razer Inc. and/or its affiliates in the United States or other countries. All other trademarks are the property of their respective owners, and other company and product names mentioned herein are trademarks of their respective companies. The actual product may differ from the images. The information is correct at the time of printing.

Windows and the Windows logo are trademarks of the Microsoft group of companies.

Razer Inc. ("Razer") may own copyrights, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) relating to the product covered by this manual. The distribution of this manual does not grant you any license to these copyrights, trademarks, patents, or other intellectual property rights. The Razer DeathAdder V3 Pro product (the "Product") may differ from the images, whether on packaging or elsewhere. Razer disclaims any responsibility for errors that may have occurred in this document. The information contained herein is subject to change without notice.

Limited Product Warranty

For the latest terms and conditions in effect for the limited product warranty, please visit razer.com/warranty.

Limitation of Liability

Razer shall not be liable in any event for any loss of profits, loss of information or data, accidental, indirect, punitive, or consequential damages arising in any way from the distribution, sale, resale, use, or inability to use the Product. In no event shall Razer's liability exceed the retail purchase price of the Product.

General

These terms shall be governed by and construed in accordance with the laws of the jurisdiction in which the Product was purchased. If any of the terms herein are held to be invalid or unenforceable, that term shall be (to the extent it is invalid or unenforceable) severed and deemed excluded, without invalidating