Kendall Howard Performance Series LAN Station Installation and Warranty Guide
This document provides installation instructions and warranty information for the Kendall Howard Performance Series LAN Stations.
Product Overview
Kendall Howard Performance Series LAN Stations are designed for efficient organization and accessibility. This manual covers the installation and warranty details for these units.
Available Models: Performance 100 & 200 Series LAN Stations.
Available Colors: African Mahogany, Folkstone.
Available Sizes (Width): 24", 48", 72", 96".
Part Number Identification
| Part Description | 24" | 48" | 72" | 96" |
|---|---|---|---|---|
| Worksurface - African Mahogany | KH-2269 (1) | KH-2266 (1) | KH-2272 (1) | KH-2275 (1) |
| Worksurface - Folkstone | KH-2214 (1) | KH-2211 (1) | KH-2218 (1) | KH-2221 (1) |
| Left leg | KH-2100 (1) | KH-2100 (1) | KH-2100 (1) | KH-2100 (1) |
| Right Leg | KH-2101 (1) | KH-2101 (1) | KH-2101 (1) | KH-2101 (1) |
| Back Plate | KH-2051 (1) | KH-2050 (1) | KH-2052 (1) | KH-2053 (1) |
| Leg Leveler | CP-1007 (4) | CP-1007 (4) | CP-1007 (4) | CP-1007 (4) |
| Cross Bars | A-2641 (6) | A-2642 (6) | A-2643 (6) | A-2644 (6) |
| 1 1/2" Bolt | HW-BHS-001 (18) | HW-BHS-001 (18) | HW-BHS-001 (18) | HW-BHS-001 (18) |
| 2 1/2" Bolt | HW-BHS-003 (4) | HW-BHS-003 (4) | HW-BHS-003 (4) | HW-BHS-003 (4) |
| Channel Nuts | HW-CN-001 (8) | HW-CN-001 (8) | HW-CN-001 (8) | HW-CN-001 (8) |
| 1/4-20 Screw | HW-PHS-006 (12) | HW-PHS-006 (18) | HW-PHS-006 (24) | HW-PHS-006 (30) |
| 1 1/2" X 1 1/2" End Cap | CP-1008 (4) | CP-1008 (4) | CP-1008 (4) | CP-1008 (4) |
| 1 1/2" x 2" End Caps | CP-1004 (4) | CP-1004 (4) | CP-1004 (4) | CP-1004 (4) |
| 3/4" End Caps | CP-1009 (16) | CP-1009 (16) | CP-1009 (16) | CP-1009 (16) |
| Upper Shelf Channel | KH-2008 (2) | KH-2008 (2) | KH-2008 (2) | KH-2008 (2) |
| Left Upper Support | KH-2005 (2) | KH-2005 (2) | KH-2005 (2) | KH-2005 (2) |
| Right Upper Support | KH-2006 (2) | KH-2006 (2) | KH-2006 (2) | KH-2006 (2) |
| Upper Shelves - African Mahogany | KH-2268 (2) | KH-2265 (2) | KH-2271 (2) | KH-2274 (2) |
| Upper Shelves - Folkstone | KH-2213 (2) | KH-2210 (2) | KH-2217 (2) | KH-2220 (2) |
| Lower Shelf - African Mahogany | KH-2270 (1) | KH-2267 (1) | KH-2273 (1) | KH-2276 (1) |
| Lower Shelf - Folkstone | KH-2215 (1) | KH-2212 (1) | KH-2219 (1) | KH-2222 (1) |
Specifications
The following table outlines the dimensions and weight for the different sizes of the LAN Station Workbenches:
| Dimensions | A | B | C | D | E | Weight |
|---|---|---|---|---|---|---|
| 24" Workbench | 30" | 30" | 16" | 24" | 78.5" | 113 lbs. |
| 48" Workbench | 30" | 30" | 16" | 48" | 78.5" | 150 lbs. |
| 72" Workbench | 30" | 30" | 16" | 72" | 78.5" | 235 lbs. |
| 96" Workbench | 30" | 30" | 16" | 96" | 78.5" | 296 lbs. |
Dimensional Drawing Description: The diagram shows a multi-tiered workstation. 'A' indicates the height of the lower section, 'B' indicates the depth of the main work surface, 'C' indicates the depth of the upper shelves, 'D' indicates the width of the workstation, and 'E' indicates the overall height.
Tools Needed
- Phillips screwdriver
- T-Handled Wrench (Included)
- Cordless drill
Component Identification
The following parts are included with your Kendall Howard LAN Station:
- Left Upper Support (2)
- Right Upper Support (2)
- Series 100 Upper (2) Lower Shelves (1)
- Series 200 Upper (2) Lower Shelves (2)
- Left Leg (1)
- Right Leg (1)
- Work Surface (1)
- Back Plate (1)
- Leg Leveler (4)
- Upper Shelf Channel (2)
- 1 ½" Bolt (18)
- 2 ½" Bolt (4)
- Channel Nut (8)
- ¼-20 Screw (12-30)
- 1 ½" x 1 ½" End Cap (4)
- 1 ½" x 2" End Cap (4)
- ¾" End Cap (16)
- Series 100 Cross Bars (6)
- Series 200 Cross Bar (7)
Installation Instructions
Follow these steps carefully to assemble your Kendall Howard LAN Station.
Step 1: Prepare Work Surface
Remove all components from the crate. Place the worksurface on a sturdy working area with the screw holes facing up. Locate two cross bars and the ¼-20 screws. Install the screws as shown in the diagram.
Diagram Description: Shows the worksurface upside down with two cross bars being attached using ¼-20 screws.
Step 2: Attach Legs and Cross Bars
Locate the left leg, right leg, and the 1 ½" bolts. Install the bolts through the legs into the cross bars as shown. Rotate the table on its surface.
Diagram Description: Shows the legs being attached to the cross bars on the underside of the worksurface using 1 ½" bolts. An arrow indicates rotation.
Step 3: Attach Lower Shelf Cross Bars
Locate two cross bars and the lower shelf. Attach the cross bars to the lower shelf with the ¼-20 screws. Note: The 100 Series has one lower shelf surface, while the 200 Series has two.
Diagram Description: Shows the lower shelf with two cross bars being attached using ¼-20 screws.
Step 4: Attach Lower Shelf Assembly
Attach the lower shelf assembly to the bottom of the workbench structure using the 1 ½” bolts.
Diagram Description: Shows the lower shelf assembly being connected to the main frame using 1 ½" bolts.
Step 5: Install Leg Levelers or Casters
Install the four leg levelers to the bottom of the workbench. If optional casters were purchased, install them instead of the leg levelers. Rotate the workbench onto the levelers/casters.
Diagram Description: Shows the bottom of the workbench frame with leg levelers being screwed in. An option for casters is mentioned.
Step 6: Attach Back Panel
Locate the back panel, four 2 ½" bolts, and four channel nuts. Align the back panel with the pre-drilled mounting holes on the rear LAN station legs. Loosely install the 2 ½” bolts through the back panel and into the channel nuts.
Important Note: The channel nut teeth should always face towards the bolt head. Ensure there is about 1" of space between the nut and the frame.
Diagram Description: Shows the back panel being attached to the rear legs using 2 ½" bolts and channel nuts. A close-up indicates the correct orientation of the channel nut.
Step 7: Install Upper Shelf Channels
Locate the upper shelf channels and slide them over the channel nuts. Adjust the height and fully tighten the bolts.
Diagram Description: Shows the upper shelf channels being slid onto channel nuts attached to the vertical supports, with arrows indicating height adjustment.
Step 8: Attach Upper Shelf Supports
Locate the four upper shelf supports, four 1 ½" bolts, and four channel nuts. Install the 1 ½" bolt through the top mounting holes of the upper shelf supports, loosely installing the channel nuts. Note that the larger holes on the shelf supports face outward. Slide the shelf supports into the upper shelf channels.
Diagram Description: Shows upper shelf supports being attached to the vertical channels using 1 ½" bolts and channel nuts. A note indicates the orientation of the larger holes on the supports.
Step 9: Install Upper Shelves
Locate the upper shelves, cross bars, and ¼-20 screws. Install the ¼-20 screws into the shelves. Locate four 1 ½" bolts and install through the upper shelf mounts and into the cross bar. Adjust shelf assembly to the desired height.
Diagram Description: Shows upper shelves being attached to the shelf supports and cross bars using ¼-20 screws and 1 ½" bolts.
Step 10: Install ¾" Round End Caps
Locate the ¾" round end caps. Install end caps in the locations shown on the left and right side frames.
Diagram Description: Shows the ¾" round end caps being inserted into the bottom of the legs/frames.
Step 11: Install Other End Caps
Locate the 1 ½" x 1 ½" square and 1 ½" x 2" rectangle end caps. Install end caps in the locations shown on the frames and upper shelf supports.
Diagram Description: Shows the 1 ½" x 1 ½" square and 1 ½" x 2" end caps being inserted into various points on the structure.
Maintaining Your New Workbench
To keep your Kendall Howard Performance Workbench looking new, regular cleaning with a damp cloth and a mild soap and water solution is recommended.
- Do not use abrasive cleaners.
- Keep the work surface away from petroleum products.
- Keep away from open flames. Shelving is constructed from a wood product and is not fireproof.
- If casters were installed, moving the bench may loosen hardware over time. Periodically check that all bolts and screws are tightened.
- Do not exceed the weight thresholds for your bench, as this could result in serious injury or death.
Limited Warranty
Kendall Howard offers a One Year Limited Warranty Against Defects in Material and Workmanship for its products.
General Terms:
The product is warranted to be free of defects in material and workmanship for one year from the date of purchase from Kendall Howard, not to exceed fifteen (15) months from the date of manufacture. Kendall Howard will, at its option, furnish new or factory remanufactured products for repair or replacement.
Warranty Extends to First Purchaser for Use, Non-transferable:
This warranty is extended only to the original purchaser for use and is not transferable or assignable without prior written permission from Kendall Howard.
Assignment of Warranties:
Kendall Howard assigns to the user any warranties from manufacturers and suppliers of components, but makes no representations or assumes responsibility for the effectiveness or extent of these third-party warranties.
Drawings, Descriptions:
Kendall Howard warrants that the product will conform to descriptions in invoices, orders, and proposals. These are not warranties of performance or fitness for a particular purpose.
Warranty Claims Procedure:
Within thirty (30) days of discovering a defect, the user must contact Kendall Howard. Kendall Howard will repair or replace non-conforming products without charge for materials. Labor is free within thirty (30) days of purchase; otherwise, standard rates apply. Kendall Howard covers shipping costs for replacement products and return of defective items. Coverage is contingent upon Kendall Howard inspection confirming a defect and no signs of misuse.
Warranty Performance of Component Manufacturers:
Kendall Howard may utilize component manufacturers or their representatives to perform warranty work, aiming for prompt and effective resolution.
Items Not Covered By Warranty:
This warranty does not cover damage or defects caused by misuse, improper application, incorrect electrical connections, negligence, inappropriate operating conditions, unauthorized repairs, transit accidents, tampering, alterations, changes in location or use, exposure to elements, Acts of God, theft, or installation contrary to recommendations. It also does not cover serial number alterations. Installation costs, circuit breaker resetting, maintenance, service items, labor, or shipping costs for removal/replacement are not covered, unless specifically provided.
This warranty is void if the user alters the product in any way.
Limitations:
- This warranty is in lieu of and excludes all other warranties, express or implied, including merchantability and fitness for a particular purpose.
- The user's sole and exclusive remedy is repair or replacement.
- If the user's remedy fails of its essential purpose, Kendall Howard's liability for property loss or damage shall not exceed the net product purchase price.
- Kendall Howard shall not assume liability for indirect, special, incidental, exemplary, or consequential damages, including lost profits, business interruption, or data loss.
Miscellaneous:
- No salesperson, employee, or agent of Kendall Howard is authorized to add to or vary the terms of this warranty. Modifications must be in writing and signed by a Kendall Howard officer.
- This warranty is effective upon receipt of full payment and supersedes all previous warranties.
- Kendall Howard reserves the right to supplement or change warranty terms.
- If any provision becomes invalid or unenforceable, the remaining provisions remain in full force.
- Users must complete and return the User Information Card within thirty (30) days of receipt.
- This warranty is governed by the laws of the State of Minnesota.
- This warranty represents the entire agreement between Kendall Howard and the User.
Support
Support is available through the following methods:
- By Phone: 8:00 AM to 5:00 PM CST, 651.213.1333
- By Email: customerservice@kendallhoward.com
- By Mail: 10152 Liberty Lane, Chisago City, MN 55013
- By Web: www.kendallhoward.com
Home Page - Kendall Howard
