Kendall Howard Fan Assembly Kit

Installation Instructions

Product Overview

This document provides installation instructions for the Kendall Howard Fan Assembly Kit. It includes details on product specifications, contents, assembly steps, and warranty information.

Part Numbers: 1908-3-001-01, 1908-4-001-01

For Your Safety: Read and understand the entire manual before installing.

Support

Support is available through the following methods:

Specifications

Attribute Details
Dimensions 4.7" Wide x 4.7" Long x 1.25" Tall
Outlets 3-tail NEMA power cord, 6' length
Cubic feet per minute (CFM) 78 CFM
Voltage 115 volts
Bearings Ball Bearings
Warranty 1 Year
Motor Type Brushless
Rated Speed 2,000 RPM

Tools Needed & What's in the Box

Tools Needed:

? Phillips screwdriver

What's in the box:

  • QTY 1: 120 mm Fan
  • QTY 1: Fan Guard
  • QTY 1: Power Cord
  • QTY 4: 10mm Pan Head Screw (Note: No nut required, screws directly into fan)
  • QTY 4: 6-32 3/4" Cross Head Screw
  • QTY 4: 6-32 Nut

Installation Instructions

Follow these steps to install the fan assembly kit:

Step 1:

If the fan kit is being installed into a Kendall Howard cabinet and is pre-assembled, remove screws and protective covers. Place the top fan guard on top of the cabinet knock-out hole and insert the screws.

[Diagram Description: Illustrates placing a fan guard onto a cabinet's top surface, aligning it with a pre-cut hole, and inserting screws through the guard.]

Step 2:

Place the fan on the underside of the top cabinet panel with the airflow arrow facing up. Line up screws with the fan and install the nuts. Fully tighten hardware.

[Diagram Description: Shows the fan positioned on the interior side of the cabinet top panel. Screws are shown passing through the panel and into the fan housing, with nuts being attached to secure it.]

Step 3:

[Diagram Description: Depicts the process of using screws and nuts to fasten the fan and fan guard assembly to the cabinet.]

Step 4:

[Diagram Description: Shows the completed installation, with the fan securely mounted to the cabinet.]

Warranty Information

GENERAL: Kendall Howard offers a Limited Warranty against defects in material and workmanship for its products. Please read the warranty carefully for details on responsibilities and resolution.

TERMS OF WARRANTY: Kendall Howard products are warranted to be free of defects in material and workmanship. Kendall Howard will, at its option, furnish new or factory remanufactured products for repair or replacement of any defective part.

WARRANTY EXTENDS TO FIRST PURCHASER FOR USE, NON-TRANSFERABLE: This warranty is extended to the original purchaser for use in the United States and is not transferable or assignable without prior written permission from Kendall Howard.

ASSIGNMENT OF WARRANTIES: Kendall Howard assigns to the User any warranties from manufacturers and suppliers of components, but makes no representations regarding their effectiveness or extent.

DRAWINGS, DESCRIPTIONS: Kendall Howard warrants that the product will conform to its descriptions. These are not warranties of performance or fitness for a particular purpose.

WARRANTY CLAIMS PROCEDURE: Within a reasonable time (not exceeding 30 days) after discovering a defect, contact Kendall Howard. Kendall Howard will repair or replace non-conforming products without charge for materials. Labor is free if performed within 30 days of purchase; otherwise, labor charges apply. Kendall Howard covers shipping costs for replacement products and return of defective products. Coverage is subject to inspection confirming a defect and no misuse.

WARRANTY PERFORMANCE OF COMPONENT MANUFACTURERS: Kendall Howard may utilize third-party component manufacturers for warranty work to ensure prompt and effective resolution.

ITEMS NOT COVERED BY WARRANTY: This warranty does not cover damage or defects caused by misuse, improper application, incorrect electrical current, negligence, inappropriate operating conditions, unauthorized repair, transit accidents, tampering, alterations, changes in location or use, exposure to elements, Acts of God, theft, or installation contrary to recommendations. It also does not cover installation costs, circuit breaker resetting, maintenance, or service items. Labor and shipping costs for repair/replacement are not included unless specifically provided. Altering the product voids the warranty.

LIMITATIONS: This warranty is exclusive and in lieu of all other warranties, express or implied, including merchantability and fitness for a particular purpose. The sole remedy is repair or replacement. Kendall Howard's liability for property loss or damage shall not exceed the net product purchase price. Kendall Howard assumes no liability for indirect, special, incidental, exemplary, or consequential damages, including lost profits, business interruption, or loss of data.

MISCELLANEOUS: No salesperson, employee, or agent can add to or vary these terms. Modifications require written consent from a Kendall Howard officer. This warranty is effective upon receipt of full payment and supersedes all previous warranties. Kendall Howard reserves the right to change warranty terms. If any provision becomes invalid, the remaining provisions remain in effect. Users must complete and return the User Information Card within 30 days of receipt. This warranty is governed by the laws of the State of Nebraska and represents the entire agreement.

Disclaimer

Kendall Howard LLC endeavors to make this manual accurate and complete. However, Kendall Howard LLC makes no representations or warranties of any kind, expressed or implied, about whether the use of products contained herein would infringe any rights or the correctness, accuracy, or reliability of the information contained herein, or that said information covers all details, conditions, or variations. The information herein does not provide for every possible contingency in connection with the installation or use of the product(s). The information contained in this document is subject to change without notice or obligation. Kendall Howard LLC assumes no responsibility for the accuracy, completeness, or reliability of the information contained in this document. Any reliance placed on the information is therefore strictly at your own risk.

Models: 1908-3-001-01, 1908-3 Network Rack 4 Fan Assembly Kit, 1908-3, Network Rack 4 Fan Assembly Kit, Rack 4 Fan Assembly Kit, 4 Fan Assembly Kit, Fan Assembly Kit

File Info : application/pdf, 7 Pages, 923.60KB

PDF preview unavailable. Download the PDF instead.

1908-3-001-01-instruction-combined

References

Microsoft Publisher 2010

Related Documents

Preview Kendall Howard Fan Assembly Kits: Efficient Thermal Management for Rackmount Enclosures
Kendall Howard Fan Assembly Kits provide efficient thermal management for rackmount cabinets and server enclosures. Featuring standard and high-speed options, these kits help maintain optimal temperatures for critical equipment with easy installation and grounding options.
Preview Kendall Howard LINIER WM Swingout Cabinets with Glass Door - Technical Specifications
Detailed technical specifications and dimensions for Kendall Howard's LINIER WM Swingout Cabinets with Glass Doors, available in 6U, 9U, 12U, 15U, 18U, and 22U configurations. Includes front, side, and rear view dimensions, rail adjustment, and key features.
Preview Kendall Howard LINIER WM Swing-Out Perforated Door Cabinets - Technical Specifications
Detailed technical specifications and dimensional data for Kendall Howard's LINIER WM Swing-Out Wall Mount Cabinets with perforated doors, available in 6U, 9U, 12U, 15U, 18U, and 22U configurations.
Preview Kendall Howard Wall Mount Rack Installation Guide & Warranty
Comprehensive installation instructions and warranty details for Kendall Howard Wall Mount Racks, including part numbers 1915-3-001-08 and 1915-3-001-12.
Preview Kendall Howard Performance Series LAN Station Installation and Warranty Guide
Installation instructions and warranty details for Kendall Howard Performance Series 100 & 200 LAN Stations and Workbenches, covering assembly, specifications, and support.
Preview Kendall Howard Rack Screws & Washers Installation Guide
Comprehensive installation instructions and warranty details for Kendall Howard rack screws and washers, covering installation with cage nuts and tapped rails.
Preview Kendall Howard LAN Station Caster Kit Installation Guide
Comprehensive installation instructions for the Kendall Howard LAN Station Caster Kit (Models 5200-3-001-00 & 5200-3-002-00), covering setup, safety, and warranty information.
Preview Kendall Howard Rack Screws and Cage Nuts | Premium American-Made Rackmount Hardware
Kendall Howard offers high-quality, American-made rack screws and cage nuts designed for secure and reliable rack mounting. Explore detailed specifications, features, and part numbers for their truss-head screws and unique cage nut designs.