GETKÅL LED Lighting Chain
Brand: IKEA
Product Overview
The IKEA GETKÅL LED lighting chain is designed for both indoor and outdoor use. It provides decorative lighting and comes with specific safety instructions and usage guidelines.
Important Safety Warnings and Instructions
- WARNING: Do not connect the lighting chain to the power supply while it is still in its packaging.
- The connecting cable cannot be repaired or replaced. If the cable is damaged, the entire fitting must be discarded.
- Do not connect this chain electrically to another chain.
- The light source (bulb) is non-replaceable. When the light source reaches the end of its life, the entire luminaire must be replaced.
- CAUTION: Strangulation hazard. Hang out of reach of young children.
- ONLY USE A SAFETY TRANSFORMER AS THE POWER SUPPLY FOR THE PRODUCT.
- WARNING: For lighting chains that rely on gaskets for protection against dust, solid objects, and moisture: This lighting chain must not be used without all gaskets being in place.
Diagram Descriptions
The product includes visual guides for setup and operation:
Connection and Assembly
An illustration shows the process of connecting the power supply to the lighting chain. A hand is depicted screwing a cap onto a threaded connector to ensure a secure and sealed connection. A magnified view emphasizes the screw mechanism.
Light Mode Selection
The control unit allows for different lighting effects. The sequence of operations is as follows:
- Press the button once (1x) to activate a specific lighting mode.
- Press the button twice (2x) to cycle to the next mode.
- Press the button three times (3x) to cycle through the available modes.
Day/Night Operation and Sensor
Visuals depict the lighting chain functioning in different ambient conditions: one showing the chain under a sun symbol (daytime) and another under a moon and stars symbol (nighttime). A close-up of the control unit shows a finger interacting with a button, suggesting the presence of a light sensor or timer that may automatically activate or adjust the lighting based on ambient light levels.
