GETKÅL LED Lighting Curtain

Important Safety Information

WARNING! For INDOOR & OUTDOOR USE!

Do not connect the chain to the supply while it is in the packing. The connecting cable cannot be repaired or replaced. If the cable is damaged, the entire fitting must be discarded. Do not connect this chain electrically to another chain.

The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.

NON-REPLACEABLE BULB.

CAUTION! Strangulation hazard. Hang out of reach of young children.

ONLY USE A SAFETY TRANSFORMER AS SUPPLY FOR THE PRODUCT.

For lighting chains which rely on gaskets to provide the specified degree of protection against dust, solid objects and moisture: WARNING – THIS LIGHTING CHAIN MUST NOT BE USED WITHOUT ALL GASKETS BEING IN PLACE.

Product Operation

The diagrams illustrate how to operate the lighting curtain:

• Connecting Components: A diagram shows a threaded connector being screwed into a base, with a circular inset showing a hand tightening it.
• Light Modes:
  • 1 press of the button cycles through modes.
  • 2-4 presses cycle through modes.
  • 5 presses turn the light off.
  • 6 presses turn the light on.
• Light Sensor: The lighting curtain is designed to operate automatically based on light conditions. It is off during daylight (indicated by a sun icon) and turns on during nighttime (indicated by a moon and stars icon).

General Product Information

This product is suitable for both indoor and outdoor use.

The light source is not replaceable. If the light source fails, the entire luminaire must be replaced.

Ensure all gaskets are in place for proper protection against dust, solid objects, and moisture.

Always use the provided safety transformer for power supply.