SVARTRÅ
IKEA Design and Quality
Important Safety Instructions
For Indoor & Outdoor Use!
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used. The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced. Keep these instructions for future use.
CAUTION!
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.
Cleaning: Use a damp cloth, never a strong cleaning agent.
CAUTION!
Strangulation hazard. Hang out of reach of young children.
General Safety Instructions
When using electrical products, basic precautions should always be followed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
- When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended.
Product Warnings and Usage
This is an electric product - not a toy! To avoid risk of fire, burns, personal injury, and electric shock, it should not be played with or placed where small children can reach it.
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from the cord, wire, or light string.
Do not close doors or windows on the product or extension cords, as this may damage the wire insulation.
Do not cover the product with cloth, paper, or any material not part of the product when in use.
Read and follow all instructions that are on the product or provided with the product.
Use and Care Instructions
When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
If the product is placed on a tree, the tree should be well secured and stable.
Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
When storing the product, carefully remove it from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.
FCC Compliance and Warnings
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING
Deviation from the assembly instructions may result in a risk of fire or electric shock.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
This decorative item is not intended for use by people (including children) whose physical, sensory, or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised. Children must be supervised to ensure that items are not used as toys.
CAUTION and mind the following. To reduce the risk of fire and electric shock:
- Disconnect the decorative item from the power source before performing any maintenance or cleaning activity.
- Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources.
- Disconnect the item when leaving the house, going to bed, or if left unattended.
- Do not hang ornaments or other objects from the string, cable, or light chains.
- Do not cover the decorative item with fabric, paper, or any material that is not part of the product when it is being used.
- Do not install the light chains in a way that cuts or damages the cable insulation.
This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless the plug can be fully inserted. Do not alter or replace the plug.
Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
Diagram Descriptions
Diagram 1: Shows how to connect multiple lighting chains together, indicating a minimum of 4 chains can be connected. It also displays a warning symbol with scissors and a light bulb crossed out, meaning do not cut the cable or bulbs.
Diagram 2: Illustrates the connection of the lighting chain to its power source or transformer. A close-up view shows the mechanism for securing the connection.
