iTechworld PS2000 Portable Power Station User Guide
An illustration of the iTechworld PS2000 portable power station, showing its front panel with various ports (AC outlets, USB-A, USB-C, DC output) and an LCD display, as well as its side and top profiles.
⚠️ Before using or storing, please read this user guide carefully, and charge your PS2000 with the included charging adapter.
Product Overview
The PS2000 portable power station features the following components:
- 1. Main power control button
- 2. Light control button
- 3. USB control button
- 4. DC control button
- 5. LCD display screen
- 6. Air intake/outlet vents
- 7. AC 240V Output button (located on the bottom right)
- 8. PV/Solar Input port
- 9. AC input port
- 10. Overload protection indicator
Button Functions
Power On/Off Control Button
This is the master power button. A long press turns the unit on, and another long press turns it off. Hold the button until the screen turns on or off. When not in use, please turn the unit off.
Led Light Control Button
Operate method: Short press to turn on and cycle through light modes (Solid/SOS/Flash). Long press to turn off the light from any mode.
USB Control Button
Ensure the power station is on before pressing the USB Control button. Operate method: Short press to turn USB ports on/off.
- USB-A ports (x2): 5V/2.4A
- USB-A port: QC3.0-18W
- USB Type-C port: PD-100W
DC Control Button
Ensure the power station is on before pressing the DC Control button. Operate method: Short press to turn DC outputs on/off.
- DC Output (x2): 12V/3A
- Cigar Lighter output: 12V/10A
- XT60 output: 12V/25A
LCD Screen Display
The informative LCD display shows the remaining power and usage data. The display enters sleep mode after 30 seconds of inactivity and wakes up when charging is initiated or any button is pressed.
Air Intake/Outlet (built-in cooling fan)
The PS2000 uses an internal cooling fan to maintain operation within the appropriate temperature range. The fan activates automatically during high output/input loads and may run intermittently to keep internal temperatures stable. Ensure the vents are not blocked or covered.
AC 240V Output Button
Ensure the power station is on before pressing the AC Output button. Operate method: Short press to turn AC output on/off.
Overload Protection
This feature prevents damage from excessive AC input current due to power surges or fluctuations. If an overload occurs, the protector will automatically cut off AC input. To restore AC input:
- Turn off the PS2000 and unplug all ports.
- After confirming all ports are standard, turn on the unit.
- Press the overload protection button to switch on the AC line and restore AC input.
Charging Inputs
PV/Solar Input
Use the included 25A Anderson to 50A Anderson conversion cable to connect your solar panel. The maximum solar panel input is 500W, with a maximum voltage of 50V (do not exceed 50V).
AC Input
Use the included wall socket for 1100W fast charging, which can fully charge the PS2000 from 0 to 100% in approximately 2 hours.
Notice:
- The PS2000 should be charged directly by the wall socket; do not use extension cords.
- Do not connect multiple devices using a power board, as this can lead to excessive current, potentially damaging cables and causing a fire risk.
- Do not use the same socket to connect other devices while charging the PS2000. If a household socket exceeds 1500W, its safety circuit breaker will activate.
LCD Features and Display Indicators
The LCD display provides detailed status information:
- 1. Remaining discharge time
- 2. Fan status indicator
- 3. High/low temperature warning indicator
- 4. Battery level indicator
- 5. Total input power display
- 6. Total output power display
- 7. LED light status indicator
- 8. AC output status indicator
- 9. Type-C output status indicator
- 10. USB output status indicator
- 11. AC charging status indicator
- 12. Anderson charging status indicator
- 13. DC output status indicator
- 14. Cigarette lighter output status indicator
- 15. XT-60 output status indicator
Display Attention
Icon: [Air intake/outlet symbol]
Meaning: Please keep the air intake/outlet unobstructed.
Icon: [Temperature warning symbol]
Meaning: The device is experiencing high/low temperature and may stop working until the temperature returns to the usual standard.
Icon: [Flashing AC input symbol]
Meaning: The AC input is at fault; please recheck the power/Hz/cable.
Icon: [Blinking output symbol]
Meaning: The output is at fault; please recheck.
UPS Mode and Connections
UPS Mode
The PS2000 features a bypass function, meaning power is taken directly from the AC output of your house without passing through the battery. In this mode, the power source is the grid. During an emergency power outage, the power source switches to the battery within 10ms to protect connected applications.
UPS Connections
Connect the PS2000 between the wall socket and your electrical appliances, ensuring the PS2000 is powered ON. When appliances are turned on, power is drawn directly from the grid. If the power grid fails, the PS2000 automatically switches to its internal battery to supply power.
- In UPS mode, the maximum power output is below 2000W.
- In UPS mode, if the AC output exceeds 2000W, the AC output icon will blink, indicating an overload.
Accessory List
- 25A Anderson to 50A Anderson Connector
- AC Charger
- Car Charger
- User Manual
- Cable Storage Bag
It is recommended to use 2x 200W or 2x 300W iTechworld solar blankets (not included).
General Specifications
| Product Name | 2000W Portable Power Station |
|---|---|
| Product Size | L*W*H=392*279*323mm |
| Product Weight | 22.0kg |
| Capacity | 1997Wh |
| AC Charging | 50/60Hz 1100W max |
| MPPT Input | 11.5-50V 20A 500W max |
| AC Output | 50/60Hz (frequency switch available), rated 2000W pure sine wave. Built-in overload and short circuit protection. |
| USB QC3.0 | 18Wx2 |
| USB | USB-A (5V/2.4A) x 2 |
| Type-C | 5-20V/5.0A, 100W max (PD3.0) |
| DC 5521 | 12V/3A x 2 |
| XT-60 Output | 12V/25A |
| Cigar Lighter Output | 12V/10A |
| Power Off Current | <500uA |
| Operating Temperature | -10 ~ 40℃ |
| Environment Humidity | ≤90%RH |
| Cycle Times | > 3500 times |
Battery Specification
| Battery Type | LiFePo4 |
|---|---|
| Single Cell Rated Voltage | 3.2V |
| Single Cell Rated Capacity | 13Ah |
| Battery Pack Rated Voltage | 51.2V |
| Battery Pack Output Voltage | 43.2-57.6V |
| Battery Pack Rated Capacity | 1997Wh |
Solar Panel Charging
1. Do not charge the PS2000 via a solar panel with a voltage exceeding 50V.
2. Supports 500W max solar input (solar panels not included); charging time depends on the solar panel input. If solar panels produce 400W, the PS2000 can charge from 0-100% within 5 hours.
Connecting Pattern ①
The area of charging: Device connected to AC input port, then using a 25A Anderson to 50A Anderson Connector (included in accessories) to connect to solar panels.
Connecting Pattern ②
The area of charging: Device connected to AC input port, then using a 50A Anderson Connector (not included) to connect to multiple solar panels (Solar panel A and Solar panel B, not included).
AC Charger and Car Charger Charging
AC Charger Charging
Use the provided AC charger to charge this unit. It will take approximately 2 hours for a full charge.
Connection: Device -> AC Input -> Anderson Port -> AC Charger.
Car Charger Charging
Use the provided car charger to charge this unit. Car charging typically uses low power (90-120W), resulting in longer charging times. For a quicker charge, it is recommended to use the AC adapter.
Connection: Device -> AC Input -> Anderson Port -> Car Charger (included in accessory) -> Car.
Fault Resolution
| Status | Explanation | Recover Method |
|---|---|---|
| Icon flashes and buzzes ([Output fault symbols]) | Output exceeds standard (short circuit) | 1. Remove the output device. 2. Check if the overload protector is activated. If activated, press the overload protection button, then press the AC output button. 3. If the overload protector does not reset, press the AC output button directly to restore the output function. |
| The temperature warning icon flashes and buzzes ([Temperature warning symbol]) | The temperature of this product has exceeded the appropriate temperature. | Remove the equipment, turn off the power of this product, and wait for the equipment to reach the appropriate temperature. |
| Charging unavailable ([Bad connection symbol]) | Bad wire connection. | Confirm the connection status of the line and the power supply status. |
| Charging unavailable ([Overload protection symbol]) | Overload protection function activated. | 1. Turn off the power button and remove cables from all ports. 2. After verifying that all components are normal, turn on the power button. 3. Press the overload protection button to connect the AC cable to recover AC input. |
Important Warnings
- Please avoid using the PS2000 near extreme temperatures, high humidity, direct sun, and fire.
- Do not disassemble or modify this PS2000, as it may cause malfunction and fire.
- Be careful not to drop the PS2000 from a high place.
- Keep or use the PS2000 in a place out of the reach of children.
- Please use iTechworld genuine accessories only.
- Please leave a space of about 30cm away from the side suction and exhaust ports to ensure heat dissipation is not compromised.
- When not using the PS2000, turn off the power and unplug the power cord. Avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
- For long-term storage, consume power from full power to no power once every three months and then recharge to about 75%.
- Please do not use the PS2000 and its accessories to connect equipment if there is a defect.
- Please do not store the PS2000 for a long time in extremely high and low temperature places.
Contact Information
iTechworld
281 Great Eastern HWY
Burswood WA 6100
Phone: 1300 483 249
Website: www.itechworld.com.au
Email: service@itechworld.com.au
