iTECHWORLD is an Australian leader in portable power technology, specializing in lithium batteries, solar panels, inverters, and battery management systems for outdoor and off-grid living.
Established in 2006, iTECHWORLD is an Australian family-owned and operated business dedicated to revolutionizing the portable power industry. Known as 'The Power Expert,' the company designs and develops high-performance energy solutions tailored for the harsh Australian climate. Their extensive product lineup includes advanced LiFePO4 lithium deep-cycle batteries, pure sine wave inverters, DCDC chargers, solar panels, and portable power stations.
iTECHWORLD products are engineered for versatility and durability, catering to 4WD enthusiasts, campers, caravan owners, and marine applications. With a focus on innovation, many of their batteries feature built-in Battery Management Systems (BMS) and Bluetooth monitoring via the iTechworld Connect app. Based in Burswood, Western Australia, the company prides itself on providing reliable off-grid power solutions that allow adventurers to escape the grid without compromise.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
If your battery enters Safe Mode, disconnect all loads. You can reset it by connecting it to an unregulated solar panel for 5 minutes, using a portable jump starter followed by an AC charger, or connecting it in parallel with another charged battery while charging.
The 'iTechworld Connect' app is used to monitor Bluetooth-enabled batteries. It allows users to check battery status, voltage, and capacity directly from their smartphone.
Many models, such as the X Range, are IP67 rated and can be mounted under the bonnet if a heat shield is used to protect them from excessive engine temperatures. Always check the specific user guide for your model.
It is best to use a charger with a dedicated Lithium profile. If your charger has adjustable settings, set it to AGM/Gel or use the Bulk/Absorption setting of 14.4V and Float of 13.5V. Do not use Calcium charging profiles.