iTECHWORLD PS2000 Portable Power Station User Guide
Product Overview
The iTECHWORLD PS2000 is a portable power station designed to provide reliable energy for various needs, from camping and outdoor adventures to backup power for homes. It features a robust design and multiple output ports to power a wide range of devices.
Key Components:
- MAIN POWER CONTROL: The primary button to turn the unit on and off.
- LIGHT CONTROL: Manages the built-in LED light.
- USB CONTROL: Activates and deactivates USB ports.
- DC CONTROL: Activates and deactivates DC output ports.
- LCD DISPLAY: Shows remaining power, input/output status, and other operational data.
- AIR INTAKE/OUTLET: Houses the internal cooling fan for temperature regulation.
- AC 240V OUTPUT BUTTON: Controls the AC power output.
- XT-90 INPUT PORT: For connecting solar panels or car chargers via an adapter.
- AC 240V INPUT PORT: For charging the unit using the AC wall charger.
- OVERLOAD PROTECTION: A safety feature that disconnects power if an overload is detected.
Included Accessories:
- XT90 to 50A Anderson adapter
- AC Charger
- Car Charger
- User Manual
- Cable Storage Bag
LCD Features
The informative LCD display provides real-time data:
- Remaining Discharge Time: Displays estimated time left in hours and minutes.
- Fan Status: Indicates if the cooling fan is active.
- High/Low Temperature: Alerts if the unit is operating outside the recommended temperature range.
- Battery Level Indicator: Shows the current charge level of the internal battery.
- Total Input Power: Displays the power being received by the unit (in Watts).
- Total Output Power: Displays the total power being delivered by the unit (in Watts).
- LED Light Status: Shows the current mode of the LED light.
- AC Output Status: Indicates if the AC output is active.
- USB-C Output Status: Indicates if USB-C ports are active.
- USB Output Status: Indicates if standard USB ports are active.
- AC Charging Status: Shows if the unit is currently charging via AC.
- XT90 Input Status: Indicates if the XT90 input is active.
- DC Output Status: Indicates if DC outputs are active.
- Cigarette Lighter Output Status: Indicates if the cigarette lighter port is active.
The LCD display enters sleep mode after 30 seconds of inactivity but wakes up when charging or a button is pressed. It remains active during charging or discharging.
Charging Methods
AC Charging
The PS2000 can be fully charged from 0 to 100% in approximately 2 hours using the included 1100W AC charger. Connect the charger directly to a wall socket. Avoid using extension cords or connecting other high-wattage devices to the same socket, as this may trigger the circuit breaker.
Diagram Description: The PS2000 unit is shown connected via its AC Input port to an AC charger, which is plugged into a standard wall socket.
Solar Panel Charging
The unit supports a maximum solar input of 500W and a voltage not exceeding 50V. Charging time varies based on solar panel input. Ensure no regulator is in the line, as the PS2000 has a built-in regulator. Unregulated solar power should be used.
Connecting Pattern 1: The PS2000 is connected via its XT90 port to a 50A Anderson adapter, which then connects to a single solar panel.
Connecting Pattern 2: The PS2000 is connected via its XT90 port to a 50A Anderson adapter, which then connects to two separate solar panels.
Car/Vehicle Charging
Use the provided car charger for charging via a vehicle's DC outlet. Car chargers typically offer lower power outputs (90-120W), which may result in longer charging times compared to the AC charger. The AC adapter is recommended for faster charging.
Diagram Description: The PS2000 unit is shown connected via its XT90 port to a car charging cable, which is plugged into a car's DC outlet.
UPS Mode
The PS2000 features a UPS (Uninterruptible Power Supply) bypass function. In this mode, power is supplied directly from the AC input to connected appliances, bypassing the battery. If the power grid fails, the unit automatically switches to battery power within 10 milliseconds, protecting connected appliances.
In UPS mode, the maximum power output is 2000W. If the AC output exceeds 2000W, the AC overload symbol will illuminate.
Diagram Description: The PS2000 is connected to a wall socket and to an electrical appliance (e.g., a monitor). Power flows from the wall socket through the PS2000 to the appliance. An arrow indicates power flow from the grid to the PS2000 and then to the appliance.
Fault Resolution
Follow these steps to resolve common issues:
| Status | Explanation | Resolution |
|---|---|---|
| Above icon flashes and buzzes | The output exceeds the standard and it's short-circuited. | 1. Remove the output device. 2. Check if the overload protector is activated. If so, press the overload protection button, then the AC output button. 3. If not activated, press the AC output button to restore output. |
| The temperature warning icon flashes and buzzes (High/Low Temp) | The PS2000 has surpassed the recommended temperature limit. | Remove all loads, disconnect the power source, and wait for the unit to cool down to an appropriate temperature (between -10°C to 40°C) before proceeding. |
| Charging unavailable (Bad wire connection) | Bad wire connection. | Verify the connection status of the power line and the power supply to ensure they are properly connected. |
Specifications
General Specifications
| Specification | Details |
|---|---|
| Model name | PS2000 |
| Dimensions | 392*279*323mm |
| Weight | 22.3Kg |
| MPPT Input | 11.5V-50V, 500W Max |
| AC Output | 50/60Hz (frequency switch available), rated at 2000W Pure Sine Wave. Built-in overload and short circuit protection. |
| USB Output | 2 x 5V/2.4A |
| USB QC3.0 Output | 3 x 18W |
| USB-C Output | 2 x 100W |
| XT-60 Output | 12V/25A |
| Cigarette lighter output | 12V/10A |
| Power off current | <500uA |
| Operating temperature | -10~40°C |
| Environment humidity | <90%RH |
| Cycle life | >3500 times |
Battery Specifications
| Specification | Details |
|---|---|
| Battery type | LiFePO4 |
| Single cell rated voltage | 3.2V |
| Single cell rated capacity | 20Ah |
| Battery pack rated voltage | 51.2V |
| Battery pack output voltage | 43.2V-57.6V |
| Battery pack rated capacity | 2048Wh |
Safety Precautions
For safe operation and optimal performance, the PS2000 Portable Power Station must be operated correctly. Please carefully read, understand, and follow all instructions and guidelines in this user guide. Failure to follow these instructions may result in damage to the unit, property, death, or serious injury.
Disclaimer: While iTechworld has taken every precaution to ensure the accuracy of this user guide, iTechworld assumes no responsibility for any errors or omissions. Furthermore, all specifications and functionality may change at any time without notice. It is best to view the iTECHWORLD website for the most up-to-date information.
WARNING: People with physical disabilities, visual, sensory, or mental impairments (including children) should not use this device. Children should be supervised to ensure they do not play with the power station.
DANGER: Do not disassemble or modify the power station; doing so will result in your warranty being void, and it may result in a risk of electrical shock, fire, death, or serious injury.
EXPLOSION HAZARD: Do not use the power station in an environment where flammable fumes or gases are present (such as gas bottles, petrol engines, or lead-acid battery compartments).
WARNING: Avoid using the power station in extreme temperatures, high humidity, direct sunlight, and near fire.
WARNING: Please use the wires recommended in this user guide; otherwise, it may result in damage to the power station, a risk of electrical shock, fire, death, or serious injury.
WARNING: Do not drop the power station.
WARNING: When not using the power station, turn off the power and unplug the power cord.
WARNING: Do not use the power station and its accessories to connect equipment if there is a defect.
DANGER: Never smoke or allow a spark or flame in the vicinity of the power station. This may cause the battery to explode.
LIMITATIONS OF USE: Do not use in connection with life support systems or other medical equipment or devices.
LONG TERM STORAGE: For long-term storage, discharge the power from full to empty once every three months, and then recharge it to 75%. Ensure the power is turned off completely.
Contact Us
Phone: 1300 483 249
Email: service@itechworld.com.au
Website: www.itechworld.com.au
When it comes to energy storage and creation, iTechworld takes pride in being one of the biggest names in the industry. Based in Australia, iTECHWORLD is a family-owned and operated business. With many more innovative products on the horizon, the company is committed to constantly raising the bar to provide bigger and better benefits to all its customers Australia-wide.
Whether you're an avid camper, 4WD enthusiast, or freedom seeker, iTECHWORLD has your power needs covered. Escape the grid without compromise, minimize your downtime, and travel with comfort with their large range of leading products at great prices.
iTechworld. The Power Expert.
