VIVO Desk Riser Instruction Manual

Model Series: DESK-V000K

Product Overview

This document provides instructions for assembling and using the VIVO Desk Riser, model series DESK-V000K. It includes important safety warnings, package contents, tools required, and step-by-step assembly guides.

Available SKUs: DESK-V000K, DESK-V000KG, DESK-V000KR, DESK-V000KA, DESK-V000KN, DESK-V000KW, DESK-V000KF, DESK-V000KO.

For helpful videos and specifications, scan the QR code or visit: https://vivo-us.com/products/desk-v000k

Contact Information:

Email: help@vivo-us.com
Website: www.vivo-us.com
Phone: 309-278-5303
Support Hours: Monday-Friday, 7:00am - 7:00pm CST

Safety Warnings

General Safety:

Read all instructions before assembly.
Call a qualified technician if you have any doubts about installation.
Ensure no parts are missing or defective before proceeding.
Improper installation can cause damage or serious injury.
Do not use the product for purposes not specified in this manual.
Do not exceed weight capacity.
VIVO is not liable for damage or injury from improper mounting, assembly, or use.

CHOKING HAZARD: Contains small parts. Not for children under 3 years. Adult supervision is required.

PINCH POINT WARNING: Keep hands away from support bars and moving parts during operation. Pinch points exist during lifting and lowering. Failure to follow these warnings may result in serious personal injury.

CAUTION:

Keep monitor and laptop bases fully on the desktop.
Follow cable routing instructions to avoid pinching cables.
Ensure enough cable slack for full vertical motion (15" / 38 cm).
Raise and lower the desktop slowly to keep items stable.

Package Contents

A (x1) Desk
B (x1) Keyboard Tray
C (x1) Stopper
D (x3) Pad
E (x4) Rubber Feet
F (x2) Cable Clip
S-A (x2) ST4.2x12mm Screw
S-B (x4) M5x10mm Screw

Tools Needed

Scissors
Phillips Screwdriver

Weight Capacity

Desktop: 33 lbs (15 kg)
Keyboard Tray: 4.4 lbs (2 kg)

Assembly Instructions

STEP 1: Prepare Keyboard Tray

Apply Pads (D) to the underside of the Keyboard Tray (B). Attach the Stopper (C) to the Keyboard Tray (B) using two ST4.2x12mm Screws (S-A) and a Phillips screwdriver.

Diagram showing pads being applied to the keyboard tray and the stopper being screwed into place.

STEP 2: Attach Rubber Feet and Prepare Desk

Install the Rubber Feet (E) onto the bottom of the Desk (A). Remove the shipping tie from the desk. Place the desk upright on a solid surface. NOTE: Do not squeeze the handle on the Desk (A) while cutting the shipping tie.

Diagram showing rubber feet being attached to the desk base and the shipping tie being removed.

STEP 3: Raise Desk and Attach Keyboard Tray

Raise the Desk (A) by lifting the handle on the right side of the frame. Place the Keyboard Tray (B) onto the metal brackets on the Desk (A). Secure the Keyboard Tray (B) to the brackets using four M5x10mm Screws (S-B) and tighten with a Phillips screwdriver.

Diagram showing the desk being raised and the keyboard tray being attached with screws.

STEP 4: Apply Cable Clips

Attach the Cable Clips (F) to the underside of the Desk (A) to manage cables.

Diagram showing cable clips being attached to the underside of the desk.

The desk riser is now ready for use.

Diagram showing the fully assembled desk riser with a monitor and keyboard.

Optional Grommet Mount Installation

This desk riser features a pre-drilled grommet hole for installing a monitor mount directly to the desk surface. To use this feature, remove the plug from the top surface of the riser. Secure your monitor mount using the grommet mounting method, following the hardware and assembly steps provided with your monitor mount.

Diagram illustrating the three steps for grommet mount installation: removing a plug, inserting a grommet, and attaching a mount.

	VIVO DESK-V000K Series Desk Riser Instruction Manual Instruction manual for the VIVO DESK-V000K series desk riser, covering assembly, safety warnings, weight capacity, and contact information.
	VIVO DESK-V042KB Series Desk Riser Assembly Manual and User Guide Comprehensive assembly instructions and user guide for the VIVO DESK-V042KB Series Desk Riser. Learn how to assemble, adjust tension, and utilize the grommet option for your standing desk converter.
	VIVO Electric Multi Motor Corner Desk Frame Assembly Manual Comprehensive instruction manual for assembling the VIVO Electric Multi Motor Corner Desk Frame (Model: DESK-V123EB/EW). Includes safety warnings, package contents, and step-by-step assembly instructions with diagrams.
	VIVO 72" x 30" Dual Motor Electric 4-Leg Desk Instruction Manual This manual provides assembly instructions and operational guidance for the VIVO 72" x 30" Dual Motor Electric 4-Leg Desk, including setup, controller usage, and troubleshooting.
	VIVO DESK-VE36B Black Electric Desk Riser Instruction Manual This instruction manual provides assembly steps, safety warnings, and contact information for the VIVO DESK-VE36B Black Electric Desk Riser. Learn how to safely set up and use your height-adjustable desk converter.
	VIVO DESK-V048KB/KN/KW Desk Riser Instruction Manual Comprehensive instruction manual for the VIVO DESK-V048KB/KN/KW Desk Riser, detailing assembly, usage, and tension adjustment.
	VIVO DESK-V100EWY White Electric Single Motor Desk Frame Assembly Manual Comprehensive instruction manual for assembling the VIVO DESK-V100EWY White Electric Single Motor Desk Frame. Includes pre-assembly safety warnings, parts list, step-by-step assembly instructions, controller operation, and troubleshooting.
	VIVO Black 25" Desk Riser Instruction Manual Comprehensive instruction manual for the VIVO DESK-V001G Black 25" Desk Riser. Includes assembly steps, safety warnings, and usage guidelines for this height-adjustable standing desk converter.