Hilti S-IC BT Operating Instructions

General Safety Information

Observe the following safety precautions before starting work.

Step 1: Inspection

Visually inspect the S-IC BT fastener for any damage or defects. Ensure the fastener is clean and free from debris. Pay close attention to the thread and the head of the fastener. A correct installation requires careful observation of the fastener's condition.

Diagram Description: An illustration shows a Hilti S-IC BT fastener being inspected. A magnified view highlights the thread and head of the fastener, with an eye symbol indicating visual inspection and an exclamation mark symbol indicating a critical check.

Installation Steps

Step 2a: Correct Installation (Green Checkmark)

This step illustrates a correctly installed S-IC BT fastener. The diagram shows the fastener properly seated and secured. The accompanying text indicates that this method is approved.

Diagram Description: Shows the S-IC BT fastener installed correctly. A magnified view shows the fastener's engagement. Text indicates fastener types: M8/15, M10/15, W10/15, and M8/7. A green circle with a checkmark indicates correct installation.

Step 2b: Incorrect Installation (Red Circle with Slash)

This step illustrates an incorrectly installed S-IC BT fastener. The diagram shows the fastener not properly seated or secured. The accompanying text and symbol indicate this method is not approved.

Diagram Description: Shows the S-IC BT fastener installed incorrectly. A magnified view shows the fastener's engagement. Text indicates fastener types: M8/15, M10/15, W10/15, and M8/7. A red circle with a slash through it indicates incorrect installation.

Step 2c: Partially Correct Installation (Orange Circle with Exclamation Mark)

This step illustrates a partially correct or questionable installation of the S-IC BT fastener. The diagram suggests a condition that requires further attention or may not be optimal. The accompanying symbol indicates caution.

Diagram Description: Shows the S-IC BT fastener installed with a condition requiring caution. A magnified view shows the fastener's engagement. Text indicates fastener types: M8/15, M10/15, W10/15, and M8/7. An orange circle with an exclamation mark indicates a cautionary state.

Disposal

Step 12: Disposal of Bellows

Dispose of the bellows component in accordance with local regulations. The diagram shows the bellows being placed into a trash receptacle.

Diagram Description: An illustration shows a bellows component being discarded into a waste bin.

Step 8: Product Disposal

Dispose of the Hilti S-IC BT product responsibly. Follow local waste disposal guidelines for electronic or construction materials.

Diagram Description: An icon depicts a person wearing gloves, indicating proper handling or disposal procedures for the product.