RadioShack 4-Button Ultrathin Wireless Mouse

Introduction

Thank you for purchasing RadioShack's ultrathin wireless mouse.

Package Details

• One 2.4G wireless optical mouse
• One mini USB receiver
• One user manual

Features

• Dimensions: L112×W58×H24.6mm
• 4-button design
• Adjustable DPI: 1000-1200-1600
• Snap-in Nano receiver
• Requires 2 x AAA batteries (not included)
• Compatible with Windows XP/up to Win10, Mac OSX, and Android.

Technical Parameters

• Rated voltage: 3V
• Rated current: 12.5mA
• 2.4G wireless radio frequency technology
• 2.4G wireless timely hopping technology
• Working distance: up to 10 meters (approx. 33 feet)
• Multi-level sleeping function for power saving
• Low power and low current consumption design for prolonged battery life
• Plug and play functionality
• Ergonomic and comfortable design for easy operation

Installation

1. Open the battery cover at the bottom of the mouse and insert 2 AAA batteries, ensuring correct polarity. The LED light will illuminate for 1 second upon battery installation, indicating the mouse is in a working state.
2. Connect the mini USB receiver to an available USB port on your computer.
3. Your mouse is now ready to use.

Important Notes

• The mouse will enter sleep mode automatically when the receiver is unplugged or the computer host shuts down.
• To wake the mouse from sleep mode, press any button.
• When connecting the receiver or rebooting the computer, click any button to activate the mouse; the LED will light up, indicating it is in a working state.
• This mouse can be used on most surfaces, with the exception of glass.

Troubleshooting

If the mouse does not work:

• Verify that the batteries are installed correctly with the proper positive and negative electrode orientation.
• Ensure the USB receiver is securely connected to the computer.

If the mouse moves slowly or malfunctions:

• Increase the physical distance between this mouse and other wireless mice or computer equipment.
• Increase the distance from, or turn off, other wireless devices (such as cordless phones) that might interfere with the transmission signal, which can affect the mouse's response time.

Warnings and Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

RF Exposure:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.