Radioshack Thunder 2 Bluetooth Headphones
Model: BH100
Brand: Radioshack
Operating Instructions
Button Functions
- Power On/Off: Long press 3 seconds.
- Music Playback: Click once to play/pause [▶️].
- Call Handling:
- Answer Call: Click once [?].
- Reject Call: Quick double click [❌].
- Redial Last Number: Double click during call [?].
- Track and Volume Control:
- Previous Song / Volume Down: Short press ◄◄/V- [⏪]. Long press for volume down [⬇️].
- Next Song / Volume Up: Short press ►►I/V+/M [⏩]. Long press for volume up [⬆️].
LED Indicator
The LED indicator provides status information:
- Pairing Mode: Red and blue lights flash rapidly [?].
- Connected: Solid blue light is shown [?].
- Charging: Solid red light is on [⚡].
- Fully Charged: Red light turns off [?].
Operation Description
To power on the headphones, long press the power button for three seconds. The red and blue lights will flash rapidly, indicating wireless pairing mode. To pair your headphones with a cell phone, navigate to your phone's Bluetooth preferences and select "RS THUNDER 2". No password is required. A solid blue light indicates a successful Bluetooth connection.
Once connected, you can control your cell phone's music player wirelessly. This includes playing and pausing music, skipping to the next or previous song, answering incoming calls, and redialing the last number.
MP3 Mode
The headphones can play music directly from a MicroSD card.
- Insert a MicroSD card into the headphone slot.
- Turn on the headphones. Music will play automatically. This applies whether the headphones are initially off or in Bluetooth mode.
- Use the track buttons (◄◄/V- for previous, ►►I/V+/M for next) to play songs.
- Long press the (+) or (-) buttons to adjust the volume to your desired level.
- To switch between Bluetooth mode and SD card MP3 mode, double-click the 'M' button.
Line External Audio Input
When the headphones are powered on, you can connect a 3.5mm audio cable [?] to the headphone's audio jack. This will automatically switch the headphones to AUX LINE IN mode, allowing you to play audio from an external source.
Specifications
| Impedance: | 32Ω |
| Working Voltage: | DC 5V |
| Battery Capacity: | 300mAh |
| Frequency Response: | 20Hz-20KHz |
| Charging Time: | 1.5-2 hours |
| Stand-by Time: | 48 hours |
| Play Time: | 6-8 hours |
| Bluetooth Version: | 5.3 |
| TF Audio Decoding Format: | MP3 |
| Sensitivity: | 103+/- 2dB |
| Working Range: | 10-15 meters |
FCC Compliance Information
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
